ADVANTECH PCI-1737U Digital I/O Universal PCI Card User Manual

ADVANTECH PCI-1737U Digital I/O Universal PCI Card User Manual & troubleshooting

PCI-1737U
24 channel Digital I/O Universal PCI Card

Packing List

Before installation, please make sure that you have received the following:
• PCI-1737U card
• Driver CD
• Quick Start User Manual
If anything is missing or damaged, contact your distributor or sales representative immediately.
User Manual
For more detailed information on this product, please refer to the 1737U User Manual on the CD-ROM (PDF format).

Declaration of Conformity

FCC Class A
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference in which case the user is required to correct the interference at his own expense.

CE
This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.

Overview

The PCI-1737U is a 24-bit DI/O card with PCI bus. It provides you with 24 bits of parallel digital input /output. It emulates mode 0 of the 8255 PPI chip , but the buffered circuits offer a higher driving capability than the 8255.The I/O bits are divided into three 8-bit I/O ports: A0, B0, and C0.You can configure each port as either input or output via software.

Notes
For more information on this and other Advantech products,
please visit our websites at:
http://www.advantech.com
For technical support and service
http://www.advantech.com/support/
This startup manual is for PCI-1737U.
Part No: 2003173720 1st Edition
July 2015

1 Startup Manual

Specifications

Digital Input

Number of Input Channels 24 (Shared with output)
Compatibility 5V/TTL
Interrupt Inputs 1 (PC00)
Input Voltage Logic 0 : 0.8 V (max.)
Logic 1 : 2 V (min.)

Digital Output

Number of Input Channels 24 (Shared with output)
Compatibility 5V/TTL
Input Voltage Logic 0 : 0.8 V max. @+24 mA  (sink) Logic 1 : 2 V min. @-15 mA (source)

General

I/O Connector Type 50-pin box header
Dimensions 170 mm x 100 mm (6.9″ x 3.9″)
Power Consumption +5V @ 300 mA (max.)
Temperature Operation 0 – +60°C (32- 140°F )
(refer to IEC 68 -2 – 1 ,2)
Storage -20 – +70°C (-4 -158°F)
Relative Humidity 5 – 95% RH non-condensing
(refer to IEC 60068-2-3)
Certification CE/FCC

Software Installation

ADVANTECH PCI-1737U Digital I/O Universal PCI Card User Manual  & troubleshooting 1

Hardware Installation

1. Turn off your computer and unplug the power cord and cables. TURN OFF your computer before installing or removing any components on the computer.
2. Remove the cover of your computer.
3. Remove the slot cover on the back panel of your computer.
4. Touch the metal surface of your computer to neutralize any static electricity that may be on your body.
5. Insert the PCI-1737U card into a PCI slot. Hold the card only by its edges and carefully align it with the slot. Insert the card firmly into place. Use of excessive force must be avoided, otherwise the card might be damaged.
6. Fasten the bracket of the PCI card on the back panel rail of the computer with screws.
7. Connect appropriate accessories (50-pin flat cable, wiring terminals, etc. if necessary) to the PCI card.
8. Replace the cover of your computer chassis. Reconnect the cables you removed in step2.
9. Plug in the power cord and turn on the computer.

Switch and Jumper Settings

We designed the PCI-1737U with ease of use in mind. It is a “plug and play” card, i.e. the system BIOS assigns the system resources such as base address and interrupt automatically. There are only some functions with 3 switches to be set by the user. The following section describes how to configure the card. You may want to refer to the figure below for help in identifying card components.

Port Status Settings
Users can set the onboard I/O ports as input or output separately. Please be aware that once dials the switch to “ON” (Set port as output); the software setting will be ignored.

ON Set port as output
OFF Set port I/O by software

Output Status Settings

Users can determine the output status of each port after the system powering up or resetting. The function will be effective only when the “Port Status Setting” switch is on.

ON Output LOW after reset
OFF Output HIGH after reset

Board ID Settings

ID3 ID2 ID1 IDO Board ID
1 1 1 1 0
1 1 1 0 1
1 1 0 1 2
1 1 0 0 3
1 0 1 1 4
1 0 1 0 5
1 0 0 1 6
1 0 0 0 7
0 1 1 1 8
0 1 1 0 9
0 1 0 1 10
0 1 0 0 11
0 0 1 1 12
0 0 1 0 13
0 0 0 1 14
0 0 0 0 15

PIN Assignments

PCI-1737U is quipped with a standard IDC 50-pin header.However you can also access the signals on CN1 by attaching IDC 20-pin connectors to the holes in the PCB at CN2  and CN3 by yourself. The pin assignments are as follows.

ADVANTECH PCI-1737U Digital I/O Universal PCI Card User Manual  & troubleshooting 2

Signal

Reference Direction

Description

PA <0~7> GND Input/Output Digital input/output port A, ch.0~7
PB <0~7> GND Input/Output Digital input/output port B, ch.0~7
PC <0~7> GND Input/Output Digital input/output port C, ch.0~7
+5V GND Output +5V DC power
+12V GND Output +12V DC power
GND Digital ground

 

References

FAQ


Setting up ADVANTECH PCI-1737U Digital I/O Universal PCI Card User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using ADVANTECH PCI-1737U Digital I/O Universal PCI Card User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is ADVANTECH PCI-1737U Digital I/O Universal PCI Card User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for ADVANTECH PCI-1737U Digital I/O Universal PCI Card User Manual

All symbols, colors and codes for ADVANTECH PCI-1737U Digital I/O Universal PCI Card User Manual are explained in this instruction manual. You can find everything you need and moree