ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual

SKY-6100 1U Server Grade IPC Computer

SKY-6100 1U Server­Grade IPC / Computer SKY-6100 1U SKY-6100 1U
Startup Manual

Packing List

Before you begin installing your card, please make sure that the following items have been shipped:

  1. 1 x SKY-6100 system unit
  2. 1 x Startup manual
  3. 2 x Chassis mounting ear with handle
  4. 1 x External fan module with wire guard
  5. 2 x CPU heatsink with clip
  6. 2 x Tesla P4 internal bracket
  7. 1 x Front bezel
  8. Screws for fastening the mounting ears
  9. Warranty card If any of these items are missing or damaged, please contact your distributor or sales representative immediately.

For more information on this and other Advantech products, please visit our website at:

http://www.advantech.com http://www.advantech.com/eplatform

For technical support and service, please visit our support website for SKY-6100 at: SKY-6100
SKY-6100

https://advt.ch/SKY-6100-1U5C

For driver download, please visit our support website or scan the QR code:

This manual is for the SKY-6100 Series.

Part No. //: 2001610011 Printed in China//

2nd Edition/ July 2019/20193

SKY-6100 Startup Manual /SKY-6100/SKY-6100 1

Specifications

Processor System

CPU

Intel® Xeon Socket P LGA-3647 Scalable Processor, TDP up to 140W

Intel® Xeon Socket P LGA-3647 scalable processor, TDP up to 140W Intel® Xeon Socket P LGA-3647 scalable processor, TDP up to 140W

Chipset

Intel® C622

Memory

RAM

DIMM

8 x DDR4 2666MHz 288pin DIMM up to 64 GB per DIMM 8 x DDR4 2666MHz 288-pin DIMM, each DIMM up to 64 GB 8 x DDR4 2666MHz 288-pin DIMM up to 64 GB per DIMM

Expansion
Expand
Expand-ability

PCI-e x16

5 x PCI Express 3.0 Gen3
5 PCI Express 3.0 Gen3
5 PCI Express 3.0 Gen3

Ethernet
Ethernet
Ethernet

Interface
interface

2 x 10GbE + 1 x 10/100/1000 Mbps Gigabit Ethernet

Controller
Controller

LAN1~2: Intel X557-AT2 LAN3: Intel I210AT

Display

show

show

Controller
Controller

AST 2500

VRAM

64 MB video memory
64 MB display dedicated memory
64 MB display dedicated memory

I/O Interface

I/O interface

I/O interface

Front I/O Ports

Front I/O interface

2 x USB 2.0

Rear I/O Ports

Rear I/O interface

1 x VGA, 2 x USB 3.0, 2 x 10GbE, 1 x GbE

Storage

 2.5” HDD

Supports up to 2 hot-swap 2.5” HDDs
Supports up to 2 hot-swappable 2.5″ HDDs
Supports up to 2 hot-swappable 2.5″ HDDs

Power Supply

1U 1+1 1200W Redundant Power Supply

Input Rating

Rated input voltage/current

Rated input voltage/current

100-127 Vac~, 50/60 Hz, 12.48A 200-240 Vac~, 50/60 Hz, 7.08 A

Environmental

Operating Temperature

0 ~ 35° C (32 ~ 95° F)

Operating Humidity
Working humidity
Working humidity

95% @ 40° C
non-condensing
Non-condensing

Physical Characteristic

Dimensions (W x H x D) Product dimensions (W x H x D)

Product size (W x H x D)

438 x 44 x 650 mm (17.2” x 1.7” x 25.6”)

Weight

15 kg

System Setup

NOTE: Before inserting or removing the HDD from HDD bay, please turn off the system ** , ** ,

  1. Removing the Chassis Cover.
    ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 0
  2. Remove CPU air duct and chassis support.
    ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 1
  3. Remove the CPU dust cover from CPU socket.
    ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 2
  4. Assemble the CPU with the CPU clip and align the triangle mark on both CPU and the clip. Make sure both notches A and B on the CPU are carefully assembled with the CPU clip.
    ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 3
  5. Assemble the heatsink and the sub assembly as above.
    ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 4
  6. Carefully align the triangle mark on the CPU against the triangle mark on the CPU socket then place the CPU with heatsink into the CPU socket.
  7. Use T30 Torx screwdriver for tighten the screws in the order of 1,2 -> 3,4 with a torque of 12lbf. 1,2 -> 3,4T3012 1,2 -> 3,4T3012
  8. When removing CPU and heatsink, use T30 Trox screwdriver to loosen the screws in the order of 3,4 -> 1,2, then lift the CPU and the heatsink up. CPU4,3 -> 2,1 T30CPU CPU4,3 -> 2,1 T30CPU
System Setup

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 5

Front LED Indicator/LED/

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 6

NO
Description

1

Information LED

2

LAN 1 LED

3

LAN 2 LED

4

Power Button

5

System Power LED

6

LAN 3 LED

7

Reset Button

Rear IO View

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 7

NO
Description

1

1+1 Redundant Power Supply

2

VGA Port

3

USB 1

4

USB 2

5

LAN 2

6

LAN 1

7

LAN 3

Instruction for Riser Card Cage

Note: For all riser card cages ( LRF, MRF, RRF) removing, please remove chassis support first.

Below pictures give you instructions to unscrew for all riser card cage.

1. Right Riser Card Cage (RRF)

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 8

2. Middle Riser Card Cage (MRF)

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 9

When installing MRF, align two grooves on the card cage with the nut on the chassis to make sure the riser card gold finger is aligned to the high density connector on the motherboard.

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 10

System Setup

Before inserting the gold finger into the connector, make sure two grooves are located well into the nut on the chassis as shown below.

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 11

3. Left Riser Card Cage (LRF)

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 12

When installing LRF, align three grooves on the card cage with the nut on the chassis to make sure the riser card goldfinger is aligned to the high density connector on the motherboard.

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 13
Before inserting the goldfinger to the connector, make sure three grooves are located well into the nut on the chassis as below figure shown.

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 14

Slide Rail installation

1. Remove the chassis (inner) member. Pull the slide open, then press the trigger down as shown on the drawing, and pull the chassis (inner) member out.

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 15

2. Mount the chassis (inner) member into the chassis. You may opt for M4 or M5 pan head screw. The screw head of either M4 or M5 can not exceed 2.0 mm. Alternatively, you may mount the slide member to the chassis through standoffs. Likewise, the head of standoff can not exceed 2.0 mm. Each side of chassis needs to use 3 screws or standoffs for the slide attachment.

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 16
3. Attach the cabinet (outer) member to the rail. Insert the stag into the upper and lower square holes on EIA rail from the back of rail. Push the safety lock forward to secure the bracket. It is important to check if the safety lock is in the unlocked position before mounting the brackets.

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 17

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 18

4. Mount the chassis into the cabinet. Insert the chassis (inner) member into the cabinet member as shown on the drawing. It is important to check if the ball retainer is in fully open position before installing the chassis, otherwise it might cause catastrophic damage to the chassis if ball retainer is not in the fully open position while mounting the chassis. While you are pushing the chassis back to the cabinet, you need to release the slide from its locking position by pressing the trigger down.

ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual  & troubleshooting 19

Safety Instructions
  1. Read these safety instructions carefully.
  2. Keep this User Manual for later reference.
  3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.
  4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
  5. Keep this equipment away from humidity.
  6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage.
  7. Do not leave this equipment in an environment unconditioned where the storage temperature under 0° C (32° F) or above 35° C (95° F), it may damage the equipment.
  8. The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.
  9. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet and with earth connection. Ensure to connect the power cord to a socket-outlet with earthing connection.
  10. Position the power cord so that people cannot step on it. Do not place anything over the power cord.
  11. All cautions and warnings on the equipment should be noted.
  12. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage.
  13. Never pour any liquid into an opening. This may cause fire or electrical shock.
  14. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.
  15. If one of the following situations arises, get the equipment checked by service personnel: – The power cord or plug is damaged. – Liquid has penetrated into the equipment. – The equipment has been exposed to moisture. – The equipment does not work well, or you cannot get it to work according to the user’s manual. – The equipment has been dropped and damaged. – The equipment has obvious signs of breakage.
  16. CAUTION: The computer is provided with a batterypowered real-time clock circuit. There is a danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacture. Discard used batteries according to the manufacturer’s instructions. (1) CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the Instructions. (1) ATTENTION: Risque d’explosion si la batterie est remplacée par un type incorrect. Mettre au rebus les batteries usagées selon les instructions.
  17. THE COMPUTER IS PROVIDED WITH CD DRIVES COMPLY WITH APPROPRIATE SAFETY STANDARDS INCLUDING IEC 60825.
  18. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference.
  19. CAUTION: Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges.
  20. CAUTION: Always ground yourself to remove any static charge before touching the mainboard, backplane, or add-on cards. Modern electronic devices are very sensitive to static electric charges. As a safety precaution, use a grounding wrist strap at all times. Place all electronic components on a static-dissipative surface or in a static-shielded bag when they are not in the chassis.
  21. CAUTION: Any unverified component could cause unexpected damage. To ensure the correct installation, please always use the components (ex. screws) provided with the accessory box.
  22. CAUTION: This product is not intended for use by children (this product is not a toy). (1) This equipment is not suitable for use in locations where children are likely to be present.
  23. CAUTION: Improper installation of VESA mounting can result in serious personal injury! Use suitable mounting apparatus to avoid risk of injury. VESA mount installation should be operated by professional technician, please contact the service technician or your retailer if you need this service.
  24. Repair of the device may only be carried out by trained service personnel. Advantech recommends that a service contract be obtained with Advantech Service and that all repairs also be carried out by them. Otherwise the correct functioning of the device may be compromised.
  25. CAUTION: Do not modify this equipment without authorization of the manufacturer.
  26. CAUTION: To avoid risk of electric shock, this equipment must only be connected to supply mains with protective earth.
  27. CAUTION: Remove the power cord to fully turn off the device.
  28. CAUTION: If this device was not used in the manner which manufacturer suggested, the end system shall evaluate for further compliance.
  29. CAUTION: Never immerse equipment or electrical connectors in water or other liquids.
  30. CAUTION: Remove the power cord before change FUSE and replace only with the same ratings and type of FUSE.
  31. Observe local occupational health and safety requirements and guidelines for manual materials handling.
  32. Do not attempt to move a equipment by yourself; at least two people are needed to move the equipment.
  33. Use only the power cords and power supply units provided with your equipment. The equipment might have one or more power cords. For North America, a UL listed and CSA labeled power cord must be used with the equipment.
  34. Operation of the device without regulatory approval is illegal.
  35. CAUTION: Disposal of a battery (or battery pack) into fire or a hot oven, or mechanically crushing or cutting of a battery (or battery pack), that can result in an EXPLOSION; leaving a battery (or battery pack) in an extremely high temperature surrounding environment that can result in an EXPLOSION or the leakage of flammable liquid or gas; a battery(or battery pack) subjected to extremely low air pressure that may result in an EXPLOSION or the leakage of flammable liquid or gas. Discard used batteries according to the manufacturer’s instructions.
  36. CAUTION: To disconnect power, remove all power cords.
  37. CAUTION: Monitor equipment (or display): It may endanger eyes when overused. (1) Please take a rest for 10 minutes after using 30 minutes. (2) Do not let the children under 2 years old watch the monitor (or display). For children over (including) 2 years old, do not watch the monitor (display) over 1 hour each day.
  38. CAUTION: If the user does not follow the instructions to use the equipment, it could cause the bottom side of the equipment to open.
  39. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Declaration of the Presence Condition of the Restricted Substances Marking

References

FAQ


Setting up ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual

All symbols, colors and codes for ADVANTECH SKY-6100 1U Server Grade IPC Computer User Manual are explained in this instruction manual. You can find everything you need and moree