ALTEC IMW1000 Hydra Mini Everything proof Wireless Speaker User Guide

JUST LISTEN.

HydraMini Everythingproof™
Wireless Speaker
IMW1000
QUICK START GUIDE

Contents hide

1 In the Box

2 A Closer Look

3 Charging

4 Powering On/ Bluetooth Pairing

5 Speaker Controls

6 True Wireless Pairing

7 Just Ask / Reset

8 Light Change Mode

9 Documents / Resources

9.1 References

In the Box

A Closer Look

Charging

Powering On/ Bluetooth Pairing

Speaker Controls

PRESS		PRESS & HOLD (2 sec)
+	Volume Up		ON/OFF
–	Volume Down	+	Next Track
	Play/Pause	–	Previous Track
	Answer & End Call		Reject Incoming Call

True Wireless Pairing

Turn on the ﬁrst speaker and connect It with a Bluetooth-compatible device.

Turn on the second speaker and press the button.

Press and hold the button for 2-3 seconds on the ﬁrst speaker.
The LED indicator on both speakers turns solid green once connected to each other.

With the speakers connected, True Wireless uses the speaker as a left and right channel to create a cinematic experience.
* Disconnect TWS function: power oﬀ the unit *

Just Ask / Reset

Press
To activate JUST ASK (Siri or Google Assistant)

Reset- Press & Hold
Disconnect Bluetooth: Press and hold for ﬁve seconds and the speaker will beep
Reset All connections: Press and hold for ten seconds and the speaker will power oﬀ

Overall battery performance varies depending upon use setting and environmental conditions. For further information, please visit
www.alteclansing.com

Light Change Mode

To toggle between the diﬀerent light modes:

Multicolor slow transition
Single color pulse to music
Multicolor pulse to music
Single color slow fade
Single color
Multicolor cycle changed
Multicolor fast changed with background-color
Multicolor slow fade
Four color slow fade
Four color rotation with a pulse to music
Four color rotation
Oﬀ

Press & Hold the button for 1-2 sec to change the Strobe light modes.
* off → Pulse to music → Blink → off *

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

Sakar International Inc.
195 Carter Drive
Edison, New Jersey 08817, USA
855-292-4087
www.alteclansing.com

References

Altec Lansing – Bluetooth Speakers, Headphones, and Earbuds