ANKER Power Drive II User Manual

ANKER Power Drive II User Manual  & troubleshooting 0

USER MANUAL

PowerDrive II 2-Port 24W Alloy

User Manual

Using Your Product

ANKER Power Drive II User Manual  & troubleshooting 1ANKER Power Drive II User Manual  & troubleshooting 2

ANKER Power Drive II User Manual  & troubleshooting 3

For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).

Important Safety Instructions

  1. SAVE THESE INSTRUCTIONS­ – This manual contains important safety and operating instructions for car charger Model A2728.
  2. Before using car charger, read all instructions and cautionary markings on car charger.
  3. Do not expose charger to rain, moisture, or snow.
  4. Use of an attachment not recommended or sold by the car charger manufacturer may result in a risk of fire, electric shock, or injury to persons.
  5. To reduce risk of damage to cigarette lighter connector and cord, pull by cigarette lighter connector rather than cord when disconnecting charger.
  6. Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
  7. Do not operate charger with damaged cord or cigarette lighter connector ­ replace it immediately.
  8. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceperson.
  9. Do not disassemble charger; take it to a qualified serviceperson when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
  10. To reduce risk of electric shock, unplug charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
  11. To reduce the risk of fire or electric shock, do not interconnect output terminations.
  12. CAUTION – For continued protection against risk of fire, replace only with same type and ratings of fuse, fuse rating 32Vdc, 7A.
  13. The maximum ambient temperature during use of the appliance must not exceed 25°C.
    SAVE THESE INSTRUCTIONS

FCC Statement

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.

08

(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 7973
This device complies with Industry Canada license ICES-003. Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A2728 is in compliance with Directive 2014/30/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong

Specifications

ANKER Power Drive II User Manual  & troubleshooting 4  Input DC 12 / 24V ANKER Power Drive II User Manual  & troubleshooting 5 3A

ANKER Power Drive II User Manual  & troubleshooting 6  Output

4.5V ANKER Power Drive II User Manual  & troubleshooting 7 5A
5V ANKER Power Drive II User Manual  & troubleshooting 8 4.5A
9V ANKER Power Drive II User Manual  & troubleshooting 9 2A
12V ANKER Power Drive II User Manual  & troubleshooting 10 1.5A (Max Per Port)

Customer Service

ANKER Power Drive II User Manual  & troubleshooting 11

Lifetime technical support

ANKER Power Drive II User Manual  & troubleshooting 12

[email protected]

ANKER Power Drive II User Manual  & troubleshooting 13

(US) +1 (800) 988 7973 Mon – Fri 9:00am – 5:00pm (PT)
(UK) +44 (0) 1604 936200 Mon – Fri 6:00 – 11:00 (GMT)

ANKER Power Drive II User Manual  & troubleshooting 14

18-month limited warranty*

* Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

Charge Fast, Live More

For FAQs and more information, please visit:
ANKER Power Drive II User Manual  & troubleshooting 15

ANKER Power Drive II User Manual  & troubleshooting 16  @Anker
@Anker Japan
@Anker Deutschland

ANKER Power Drive II User Manual  & troubleshooting 17

@AnkerOfficial
@Anker_JP

ANKER Power Drive II User Manual  & troubleshooting 18

@Anker

Model Number: A2728
51005002108 V01

References

FAQ


Setting up ANKER Power Drive II User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using ANKER Power Drive II User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is ANKER Power Drive II User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for ANKER Power Drive II User Manual

All symbols, colors and codes for ANKER Power Drive II User Manual are explained in this instruction manual. You can find everything you need and moree