anslut 013674 Solar LED Charger Instruction Manual

anslut 013674 Solar LED Charger Instruction Manual & troubleshooting

anslut 013674 Solar LED Charger Instruction Manual  & troubleshooting 1

ansult 013674 Solar LED Charger

anslut 013674 Solar LED Charger Instruction Manual  & troubleshooting 2

SAFETY INSTRUCTIONS

  • The solar panel generates voltage when exposed to light. Follow all the relevant electrical safety regulations.
  • The product must only be installed and maintained by suitably qualified persons.
  • Pay attention to high voltages when connecting solar panels.
  • Avoid scratching or otherwise damaging the back of the panel.
  • Protect the product from dust and dirt for best functionality.
  • Use and store the product in a dry and well ventilated place.
  • Do not use in flammable and/or explosive environments.
  • Stop using immediately if any wires are loose or electrical components are exposed.

SYMBOLSanslut 013674 Solar LED Charger Instruction Manual  & troubleshooting 3

TECHNICAL DATAanslut 013674 Solar LED Charger Instruction Manual  & troubleshooting 4

DESCRIPTION

The product converts sunlight to direct voltage. The product is intended for charging 12 V batteries.

  1. Solar panel 50 W
  2. Charging regulator 7 A/12 V
  3. Cable for battery clipsanslut 013674 Solar LED Charger Instruction Manual  & troubleshooting 5

USE

IMPORTANT

  • Do not stand or walk on the solar panel.
  • Do not lift the panel with the solar cells.
  • Grip the slot between the solar cells as shown in the diagram.

HOWTOUSE 

  1. Unfold the solar panel.
  2. Place the unfolded solar panel at a direct angle to the sun, so that it absorbs as much solar energy as possible. Support the panel if necessary so that it stands firm and at the correct angle to the sun.
    • For best output, make sure that no shadow falls on the solar cells. A= Best, B = Acceptable, C = Wrong
  3. Connect the solar panel to the charging regulator and connect the battery clip leads to the battery. anslut 013674 Solar LED Charger Instruction Manual  & troubleshooting 6
  • Tota I output
  •  Charging current
  • Charging regulator

Efficiency 

  • The above data refers to ideal conditions and strong sunlight.
  • The product generates electricity in proportion to the amount of sunlight that hits the solar panels. Clear sunshine, when the panels are correctly angled to the sun generates the most. Clouds, seasonal variations in the height of
  • the sun, dust/dirt on the solar panel, wrong angle and shadow result in reduced performance.
  • The output is also affected by transfer losses in cables and clips, and by the efficiency of the charging regulator and rectifier.

FAQ


Setting up anslut 013674 Solar LED Charger Instruction Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using anslut 013674 Solar LED Charger Instruction Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is anslut 013674 Solar LED Charger Instruction Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for anslut 013674 Solar LED Charger Instruction Manual

All symbols, colors and codes for anslut 013674 Solar LED Charger Instruction Manual are explained in this instruction manual. You can find everything you need and moree