arlo 18300421 Removable and Rechargeable Battery Packs User Guide
Safety and Compliance Information
Safe Handling and Usage Guidelines for Removable and Rechargeable Battery Packs
Improper battery pack use may cause it to EXPLODE, CATCH FIRE, and/or CAUSE BURNS if disassembled, punctured, cut, crushed, short circuited, incinerated, recharged (disposable cells), or exposed to water, fire, or high temperatures
To ensure optimal safety and performance:
- Only use Arlo or carrier approved battery packs. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. If you are unsure about whether a replacement battery or charger is compatible, contact Arlo.
- DO NOT use this battery pack for anything other than its intended purpose.
- DO NOT use a battery pack if its case appears damaged, swollen, or compromised. Examples include, but are not limited to, leaking, odors, dents, corrosion, rust, cracks, swelling, melting, and scratches.
- DO NOT disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
- DO NOT expose the battery to fire or temperatures greater than 60°C (140°F). Do not place the battery next to areas which may become hot. Examples include, but are not limited to, on or near a space heater, cooking surface, cooking appliance, iron, radiator, or fireplace.
- DO NOT get the battery pack or the Arlo device wet. Even though they might dry and appear to operate normally, the circuitry can slowly corrode and defeat its safety circuitry
- DO NOT place the battery pack in a pocket, purse, or other receptacle containing metal objects, such as keys, jewelry, or tools.
- DO NOT store the battery pack with hazardous or combustible material. Store in a cool, dry, ventilated area.
- ALWAYS keep the battery pack away from children.
- DO NOT load the battery pack backwards. MAKE SURE the battery compartment is empty and free of any moisture or loose debris before inserting the battery.
- AVOID dropping the battery pack or the Arlo device. Dropping it, especially on a hard surface, might cause damage to the battery or the Arlo device. If you suspect damage to the battery pack or the Arlo device, replace it.
- ALWAYS follow the directions in the Quick Start Guide and/or written in the Arlo Product User Manual.
- ALWAYS follow local waste and recycling laws and guidelines to dispose of used battery packs.
To the extent permissible by applicable law, Arlo Technologies disclaims all liability whatsoever related to the usage of any battery other than Arlo rechargeable batteries in your Arlo device, including without limitation, fire, damage to property, bodily injury, and/or death. You assume any and all risks associated with the usage of any battery other than Arlo rechargeable batteries in Arlo devices, including without limitation, fire, damage to property, bodily injury, and/or death. Compliance with 2014/53/EU Radio Equipment Directive (RED)
This Arlo radio equipment complies with the requirement of Article 10 (2) of the RED as it can be operated in at least one Member State without infringing applicable requirements on the use of radio spectrum. This radio equipment also complies with Article 10 (10) as no restrictions on putting it into service or requirements for authorization of use exist.
In addition, Arlo’s radio equipment is further tested to ensure spurious emissions are within the specified limits, as well as meeting the
For regulatory compliance information including the EU Declaration of Conformity, visit www.arlo.com/about/regulatory/.
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
- This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Caution: Exposure to Radio Frequency Radiation
- To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.