Associated Electrics 28th Scale Instruction Manual

Associated Electrics 28th Scale Instruction Manual & troubleshooting

Associated Electrics 28th Scale Instruction Manual
Associated Electrics 28th Scale Instruction Manual  & troubleshooting 1

2.4GHz 2 Channel Transmitter

  1. Power Switch
  2. Steering Trim
  3. Steering Wheel
  4. Throttle Trigger
  5. Battery Compartment
  6. Charge Indicator
  7. Power Indicator
    Associated Electrics 28th Scale Instruction Manual  & troubleshooting 2
  8. Battery Polarity
    Associated Electrics 28th Scale Instruction Manual  & troubleshooting 3
  9. Vehicle Charge Cord
  10. Vehicle Charge Port
  11. Vehicle Binding Button
  12. Vehicle Power Switch
    Associated Electrics 28th Scale Instruction Manual  & troubleshooting 4

WARNING!
Make sure the batteries are installed in the right direction, as marked on the transmitters battery door.

Associated Electrics 28th Scale Instruction Manual  & troubleshooting 5

Battery Charging

  1. WARNING! The vehicle and transmitter need to be turned off before you start charging.
  2. Make sure you have new batteries in the transmitter
  3. The charging indicator light will turn green when charging the vehicle. The indicator will turn off when the vehicle is fully charged.
  4. Unplug the charge cord from the vehicle.
    CAUTION! Always turn vehicle and transmitter OFF when not in use.
    Associated Electrics 28th Scale Instruction Manual  & troubleshooting 6

Driving

  1. Turn the transmitter ON FIRST, vehicle ON SECOND.
  2. Adjust steering trim so the front wheels point straight.
  3. Turn the vehicle OFF FIRST, transmitter OFF SECOND.
    CAUTION! Always turn vehicle and transmitter OFF when not in use.
    Associated Electrics 28th Scale Instruction Manual  & troubleshooting 7

Binding

  1. Turn on the vehicle and press the BIND button. The LED on the vehicle will begin blinking rapidly.
  2. Turn on the transmitter.
  3. When the LED on the vehicle becomes solid, the binding process is complete.
    Associated Electrics 28th Scale Instruction Manual  & troubleshooting 8

Spare Parts

  • 21420:  SC28 USB Charger Cable
  • 21421:  SC28 Chassis, with electronics
  • 21422:  SC28 Body Clips
  • 21424:  SC28 Body, Lucas Oil
  • 21425: SC28 Body, clear
  • 21426:  SC28 Front and Rear Wheels and Tires, mounted
  • 21428:  1:28 Hardware Package
  • 21431:  MT28 Front and Rear Wheels and Tires, mounted
  • 21432:  1:28 Plastic Group
  • 21435:  RC28T Wheels and Tires, mounted
  • 21439:  MT28 Body, clear
  • 21440;  MT28 Body, blue
  • 21441:  SC28 Body, Fox Factory
  • 21444:  TR28 Body,Pre-Cut, White/Green
  • 21445:  CR28 Body, Red, White and Blue

Associated Electrics 28th Scale Instruction Manual  & troubleshooting 9

Information

  1. Adult must be present during operation of vehicle.
  2. This product is not waterproof or water resistant. Vehicle may malfunction if operating in wet conditions.
  3. urn the vehicle and transmitter OFF when not in use. The battery may become damaged (Li-Po) if vehicle is left on while not in use.
  4. This vehicle uses a rechargeable Li-Po battery. Incorrect handling of the battery may cause the battery to puncture, leaking battery acid, and may result in a potential fire. Please dispose in accordance with laws and regulations in your area.
  5. Connect the charger per instructions. Incorrect charger connection may result in a short-circuit or other damage.
  6. If vehicle is disassembled or modified, Associated Electrics does not accept responsibility for any problem occurring as a result.
  7. If vehicle is not operating correctly, turn off immediately and contact Associated Electrics.
  8. Turn on transmitter first, then vehicle. Turn off vehicle first, then transmitter.
  9. This vehicle is designed for use on hard surfaces.
  10. Do not expose vehicle or transmitter to extreme heat, vibrations, shock, or water.
  11. There is a 90-day manufacturer defect warranty from date of receipt. Crash damage is not covered under warranty.
  12. Battery Charge Time: The vehicle battery will take 40-60 minutes to fully charge. If vehicle has not fully charged after 60 minutes, you may need to replace the batteries in the transmitter.
  13. If your vehicle loses its signal from the transmitter, rebind the transmitter to the vehicle.

Customer Support

21062 Bake Parkway, Lake Forest,
CA 92630 USA

www.AssociatedElectrics.com
www.instagram.com/TeamAssociatedrc
www.facebook.com/TeamAssociated
www.twitter/Team_Associated
call: (9149) 51414-7500
fax: (9149) 5414-7501

 

FAQ


Setting up Associated Electrics 28th Scale Instruction Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Associated Electrics 28th Scale Instruction Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Associated Electrics 28th Scale Instruction Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Associated Electrics 28th Scale Instruction Manual

All symbols, colors and codes for Associated Electrics 28th Scale Instruction Manual are explained in this instruction manual. You can find everything you need and moree