AUKEY Mini Touch Control LED Lamp User Manual

AUKEY Mini Touch Control LED Lamp User Manual & troubleshooting

AUKEY Mini Touch Control LED Lamp User Manual  & troubleshooting 1User Manual
Mini Touch Control LED Lamp

Thank you for purchasing the AUKEY LT-ST21 Mini Touch Control LED Lamp. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Package Contents

Mini Touch Control LED
Lamp Micro-USB Cable
User Manual
Warranty Card

Product Diagram

AUKEY Mini Touch Control LED Lamp User Manual  & troubleshooting 2

Specifications

Model LT-ST21
Brightness 180 lumens(Max)
Color Temperature 2900-3100K
Color Rendering Index 80Ra
Input DC 5V 1A
Power Consumption 2W
Charging Time 4-5 hours
Continuous Use Time 5.5 hours (brightest light), 30 hours (dimmest light)
Battery Capacity 2600mAh
LED Type SMD 5730
Number of LEDs 6
Dimensions 147 x 100 x 100mm / 5.79″ x 3.93″ x 3.93″
Weight 380g / 13.40oz

Getting Started

Connect one end of the included micro-USB cable to the charging input port of the lamp and the other end of the cable to a USB charger or charging port to charge. LED indicator will be red while charging and soft yellow when fully charged. Charging takes around 4 hours.

Using the Lamp

  1.  Switch on the lamp on/off switch on the bottom of the base to turn on the lamp (LED indicator will be soft yellow when switched on) and place the lamp down where you want to use it.
  2.  Tap anywhere on the touch-sensitive control surface (silver area) to light up the lamp. Increase brightness by tapping a second and third time. There are three brightness levels.
  3.  Tap a fourth time to switch off the light.

Using Lamp Color Mode 

  1. Long touch the panel for about 3 seconds (whether the lamp is lit or not) to turn on automatic color cycling mode
  2.  Tap once to pause on any color. Tap once again to continue automatic color cycling
  3. Long touch the panel for about 3 seconds to turn off the light

Product Care & Use

  •  Don’t repair, dismantle, or modify the product
  • Keep away from liquids and extreme heat
  • Don’t use on conductive surfaces (such as metal tables), which may interfere with touch control
  •  Disconnect the power cable and switch off the lamp on/off switch before cleaning or when not in use for a long time
  •  Clean the lamp only with a soft dry cloth.

Warranty & Customer Support

For questions, support, or warranty claims, contact us at the address below that corresponds with your region.  Please include your Amazon order number and product model number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
*Please note, AUKEY can only provide after-sales service for products purchased directly from AUKEY. If you have purchased from a different seller, please contact them directly for service or warranty issues.

AUKEY International Ltd.
www.aukey.com | [email protected]
No.102, Building P09, Electronics Trade Center
Huanan City, Pinghu Town, Longgang District
Shenzhen, Guangdong, 518111, CN

AUKEY Mini Touch Control LED Lamp User Manual  & troubleshooting 3

References

FAQ


Setting up AUKEY Mini Touch Control LED Lamp User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using AUKEY Mini Touch Control LED Lamp User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is AUKEY Mini Touch Control LED Lamp User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for AUKEY Mini Touch Control LED Lamp User Manual

All symbols, colors and codes for AUKEY Mini Touch Control LED Lamp User Manual are explained in this instruction manual. You can find everything you need and moree