QUICK START GUIDE
Find us on
UP Global Sourcing UK Ltd.,
Victoria Street, Manchester OL9 ODD. The UK.
MADE IN CHINA. www.beldray.com
Please read all of the instructions carefully and retain for future reference.
When using electrical products, basic safety precautions should always be followed. Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the product to the mains power supply. Children younger than 3 years old should be kept away from the product unless continuously supervised. Children aged from 3 years and less than 8 years should not plug in, regulate or clean the product or perform user maintenance. Children aged from 8 years and people with reduced physical, sensory or mental capabilities or lack of experience and knowledge can use this appliance, only if it has been placed in its intended operating position and they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children should not perform cleaning or user maintenance unless they are older than 8 years and supervised.
This is not a toy – children should be supervised to ensure they do not play with the product.
Normal voltage is still present in this product as long as the product is connected to the electrical source.
This product contains no user-serviceable parts. If the power supply cord, plug or any part of the product is malfunctioning or if it has been dropped or damaged, only a qualified electrician should carry out repairs. Improper repairs may place the user at risk of harm.
Keep the product and its power supply cord out of the reach of children and away from heat or sharp edges that could cause damage. This includes any parts of the product that may become hot during use and other heat-emitting products.
Keep hands, fingers, hair, and any loose clothing away from the rotating parts of the product.
Do not operate the product with wet hands. Do not leave the product unattended whilst connected to the mains power supply or when in use.
Do not remove the product from the mains power supply by pulling the cord; switch it off and remove the plug by hand.
Do not leave the product plugged in or operating overnight.
Do not use the product for anything other than its intended use.
Do not use this product outdoors.
Do not move the product whilst it is in use.
Do not cover the product.
Do not put objects into any of the openings.
Only lift the product with the carry handles provided.
Always use the product on a flat, stable surface.
Use of an extension cord with the product is not recommended.
This product should not be operated by means of an external timer or separate remote control system, other than that supplied with this product.
This product is intended for domestic use only. It should not be used for commercial purposes.
Warning: If a strong odor is emitted from the product, turn the unit off and unplug it from the mains power supply.
Care and Maintenance
Always wait until the floor fan has stopped completely and unplugged it from the mains power supply before performing any cleaning or user maintenance.
Wipe the floor fan with a soft, damp, lint-free cloth and allow it to dry thoroughly.
Do not immerse the floor fan in water or any other liquid.
Do not use abrasive cleaning solvents, polishes, or scouring pads to clean the floor fan, as this may cause damage.
Description of Parts
|1.16 Inch Floor Fan main unit
2. Fan blade unit
3. Front grill
4. Rear grill
5. Tilting head securing screws
|6. Base stand
7. Motor assembly
8. Carry handle
9. Control dial
Instructions for Use
Before connecting to the mains power supply, place the assembled floor fan onto a flat, stable surface, allowing for sufficient distance between the floor fan and any objects that could get damaged or caught in the rotating fan blades.
Using the 16 Inch Floor Fan
STEP 1: Plugin and switch on the floor fan at the mains power supply.
STEP 2: To turn on the floor fan, select the desired cooling speed by turning the control dial in a clockwise direction. Speed setting ‘1’ is the lowest cooling speed setting; ‘3’ is the highest cooling speed setting. STEP 3: To tilt the fan head, loosen both tilting heads securing screws by turning them in an anticlockwise direction. Position the fan head as desired for best airflow and tighten the tilting head securing screws by turning them in a clockwise direction until tight. The fan head will stay in the set orientation.
STEP 4: Turn off the floor fan by turning the control dial in an anticlockwise direction to speed setting ‘0’.
Note: When using the plug-in heater for the first time, a slight odor may be emitted. This is normal and will soon subside. Allow for sufficient ventilation around the plug-in heater.
Caution: Do not cover the fan head.
Product code: EH3232
Voltage: 220-240 V – 50 Hz
Power: 70 W
This product has a rewirable plug, refer to the online instruction manual for instructions.
If this product does not reach you in an acceptable condition please contact our Customer Services Department at www.beldray.com. Please have your delivery note to hand as details from it will be required. If you wish to return this product, please return it to the retailer from where it was purchased with your receipt (subject to their terms and conditions).
Go to www.beldray.com and search EH3232 to access the instruction manual for your product.
*To be eligible for the extended guarantee, go to www.beldray.com and register your product within 30 days of purchase.
The crossed-out wheelie bin symbol on this item indicates that this appliance needs to be disposed of in an environmentally friendly way when it becomes of no further use or has worn out. Contact your local authority for details of where to take the item for recycling.
ULTIMATE PRODUCTS HOME OF BRANDS
t: +44 (0) 161 627 1400
f: +44 (0) 161 628 2126
hk: +852 6681 9752
cn: +86 1 3417586804
Artworker: Scarlett Chester-Roberts
Project Name: I-ICI-1200838 UPG EH3232 QSG
Type of Artwork: Quick Start Guide
Size: A4 Folding Leaflet Double-sided
Software Used: Indesign CC20
Typefaces: 114/ Cen MT
Artwork Version 1
Artwork Scale 1:1
©2020 UP Global Sourcing. NI designs, images, and artwork are the copyright of UP Global Sourcing. No copying. alterations or amendments to the artwork, design can be undertaken without prior written permission of UP Global Sourcing. Any costs incurred as a result of unauthorized amendments will be recovered from the supplier responsible.
DO NOT PRINT THIS PAGE ARTWORK REFERENCE ONLY