BERMOODA User Manual

BERMOODA User Manual & troubleshooting

BERMOODA User Manual  & troubleshooting 1BERMOODA User Manual  & troubleshooting 2

USER MANUAL

P.S. -WE’RE IN YOUR CORNER

SCAN ME
BERMOODA User Manual  & troubleshooting 3
[email protected] Customer Support: RGB Corner Lamp
or email [email protected]

#DREAMTEAM #VIBES #FIVESTARSUPPORT

WE’RE HAPPY TO HELP

SCAN ME
BERMOODA User Manual  & troubleshooting 4
[email protected] Customer Support: RGB Corner Lamp
CUSTOMER SUPPORT: [email protected]

PARTS

BERMOODA User Manual  & troubleshooting 5

1. LAMP BASE 3. LEG #2 5. ALLEN WRENCH 7. REMOTE CONTROL
2. LEG #1 4. SCREW X4 6. POWER ADAPTER

STEP 1

Gently pull the wire cord from the Leg #1
BERMOODA User Manual  & troubleshooting 6Attach connector to Lamp base
BERMOODA User Manual  & troubleshooting 7

STEP 2

Slide the Legs over the Lamp base until they meat at the lamp’s stem
BERMOODA User Manual  & troubleshooting 8

Gently place the lamp on its side and tighten 2 Screws on to each Leg
BERMOODA User Manual  & troubleshooting 9

STEP 3

Plugin and enjoy the vibes!
BERMOODA User Manual  & troubleshooting 10BERMOODA User Manual  & troubleshooting 11

REMOTE MANUAL

Simple & Intuitive RGB Remote
BERMOODA User Manual  & troubleshooting 12To Pair 2+ Lamps to One Remote Press & Hold Yellow Color until the lamp flashes. To Unpair, Press & Hold Blue on Color Ring

ADVANCED SETTINGS

BASIC FUNCTIONS

BERMOODA User Manual  & troubleshooting 13 ON/OFF BERMOODA User Manual  & troubleshooting 14 Speed+
Speed-
BERMOODA User Manual  & troubleshooting 15 Carousel/Pause
BERMOODA User Manual  & troubleshooting 16 Color Picking Ring
BERMOODA User Manual  & troubleshooting 17 Rx Signal BERMOODA User Manual  & troubleshooting 18 In Operating Status: Brightness+/-
In Shutdown Status: IC Qty +/-
BERMOODA User Manual  & troubleshooting 19 Mode+
Mode-

ADVANCED INSTRUCTIONS

TO PAIR 2+ LAMPS TO ONE RGB REMOTE, TURN ON THE LAMPS THAT YOU WANT TO BE PAIRED TO THIS REMOTE, THEN PRESS & HOLD YELLOW UNTIL WHITE LIGHT FLASHES. FLASHING WHITE LIGHT INDICATES THAT THE OPERATION WAS SUCCESSFUL.

TO UNPAIR THE LAMP(S), MAKE SURE EACH LAMP THAT YOU WANT TO UNPAIR IS IN THE «ON» STATE, THEN PRESS & HOLD BLUE ON THE COLOR RING UNTIL IT FLASHES. ONCE IT FLASHES, THE REMOTE IS SUCCESSFULLY DISCONNECTED FROM EACH OF THE UNITS.  FOR ADDITIONAL TROUBLESHOOTING/SUPPORT PLEASE EMAIL [email protected]

BERMOODA User Manual  & troubleshooting 20

FAQ


Setting up BERMOODA User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using BERMOODA User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is BERMOODA User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for BERMOODA User Manual

All symbols, colors and codes for BERMOODA User Manual are explained in this instruction manual. You can find everything you need and moree