Bluedio V2 User Manual

Bluedio V2 User Manual & troubleshooting

User manual

Bluedio V2 User Manual  & troubleshooting 1

Model: Bluedio V2

Victory 2nd Generation

Packing list

Bluedio V2 User Manual  & troubleshooting 2

Schematic

Bluedio V2 User Manual  & troubleshooting 3

Power on/off:
Switch the power key on/off to turn the headset on/off.

Bluetooth pairing:

  1. The headset will automatically enter the pairing mode on boot;
  2. Start Bluetooth of the mobile phone, search for/add the Bluetooth device, and select “V2” in the searched results (password “0000” is required for some device).
  3. The headset will automatically connect back to the last successfully connected device on boot.
Bluedio V2 User Manual  & troubleshooting 4

Answer:
When getting a call, double-tap the right side of the headset to answer ii ; Or say “answer” to do it ; Or use your phone to answer/hang up.

Bluedio V2 User Manual  & troubleshooting 5

Hang up:
When getting a call, say “ignore” to hang up the phone;
Or use your phone to hang up.

Bluedio V2 User Manual  & troubleshooting 6

Music pause/play:

  1. When playing music, say “hello bluedio” to activate the voice control, and then say “pause” to stop playing.
  2. When the music is stopped, “hello bluedio” to activate the voice control, and then say “play music” to resume playing.
  3. You can also use your phone to stop/play the music.
Bluedio V2 User Manual  & troubleshooting 7

Volume up & down:

  1. When playing music, say “hello bluedio” to activate voice control, and then say “volume up” to increase the volume.
  2. When playing music, say “hello bluedio” to activate voice control, and then say “volume down” to lower the volume.
  3. You can also use the phone to control the volume.
Bluedio V2 User Manual  & troubleshooting 8

Switch up and down:

  1. Switch to the previous song via your phone.
  2. When playing music, say “hello bluedio” to activate voice control, and then say “next song” to switch to the next song.
Bluedio V2 User Manual  & troubleshooting 9

Line-in music playback
Connect the headset to phones, computers and other device to play music via a 3.5mm to Type-C audio cable.
Note: Use the feature only if the headset is turned off. (The audio cable is not supplied with the headset. Please purchase it through the official channels of Bluedio if needed .)

Headset charging
Charge the headset with the standard charging cable after turning it off. The red indicator light is on during charging. The headset is fully charged within about 2.5 hours, after then the blue indicator light is on.
Note: A DC voltage of 5V-5.5V with the current higher than 500mA must be provided if charging via a charger.

Bluedio V2 User Manual  & troubleshooting 10

Cloud function
This product supports cloud function, and you can go to the last page of the manual to scan the QR code to download the APP.

Triggering cloud (with cloud APP installed on the phone)
Say “hello bluedio” with your phone and APP both connected to the headset via Bluetooth to enter the cloud so as to enable the function and enjoy the intelligent service

Bluedio V2 User Manual  & troubleshooting 11

Product security
Scratch off the anti-fake coating on the packaging box to obtain the anti-fake number of the product, and input it on the official website www.bluedio.com to verify the authenticity.

Consulting and assistance
Please visit www.bluedlo.com for product related information and technical support.
If necessary, please email to [email protected] or call the aftersales hotline at 400-889-0123.

Technical specifications:
Bluetooth version: 5.0
Scope: up to 10 m (accessible space)
Frequency range: 2.4GHz-2.48GHz
Driving unit: 50mmx2, 30mmx2, 20mrnx8
Transducing mode: moving-coil
Supported protocols: A2DP, AVRCP, HSP, HFP
Impedance: 500 (50mm), 320 (30mm), 320 (20mm)
Frequency response: 10-22000Hz
Sensitivity: 112dB
Bluetooth music time: about 18 hours
Call time: about 26 hours
Standby time: about 200 hours
Charging time: about 2.5 hours
Working environment: -10 • C -50 • C
Input voltage/current: 5V/500mA
Output power: 80mW+80mW

Bluedio V2 User Manual  & troubleshooting 12

www. Bluedio .com

Questions about your Manual ? Post in the comments!

FAQ


Setting up Bluedio V2 User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Bluedio V2 User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Bluedio V2 User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Bluedio V2 User Manual

All symbols, colors and codes for Bluedio V2 User Manual are explained in this instruction manual. You can find everything you need and moree