BONECO Clean & Cool Fan Instruction Manual

BONECO Clean & Cool Fan Instruction Manual & troubleshooting

BONECO Clean & Cool Fan

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 1

Read and save these instructions

TECHNICAL DATA

Technical data*
Model BONECO F220CC – BONECO F230CC
Power supply voltage 120V ~ 60Hz
Power consumption 36 W (max. level)
Operation noise level 60 dBA (max. level)
Air flow 530 cfm (900 m³ / h)
CADR Dust 110 cfm (187 m³/h)
Smoke 122 cfm (207 m³/h)
Pollen 116 cfm (197 m³/h)
Dimensions L×W×H BONECO F220CC 14.8 × 14.8 × 33.5 in (375 × 375 × 850 mm) with one connector piece
BONECO F230CC 14.8 × 14.8 × 47.6 in (375 × 375 × 1210 mm) with two connector pieces
Weight (empty BONECO F220CC 17.6 lbs / 8 kg
BONECO F230CC 27.6 lbs / 12.5 kg

* Subject to change

INTRODUCTION

DEAR CUSTOMER,
Congratulations on your purchase of the BONECO “Clean & Cool” Fan. These high-performance units seamlessly adapt to your needs. On any level they provide a high air purification function and a pleasant cooling breeze of cleaned air. This is possible thanks to the HEPA-ESP Filter and UV-C light. The perfect solution for healthy air.

In developing the BONECO “Clean & Cool” Fan, we focused on creating the optimal combination of fan and purifier. This was possible thanks to the integration of the state of the art BONECO HEPA-ESP filter into our high performance Fans.

We hope you enjoy your new BONECO “Clean & Cool” Fan!

ITEMS INCLUDED

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 2BONECO fan unit

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 3Removable connector piece (F220CC: 1×/ F230CC: 2×)

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 4Base with power cord

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 5HEPA-ESP filter

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 6Manual

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 7Safety instructions

OVERVIEW AND PART NAMES

BONECO F220CC “Clean & Cool” Fan
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 8

BONECO F230CC “Clean & Cool” Fan
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 9

  1. Output regulator
  2. Fan unit
  3. HEPA-ESP filter
  4. Button for unlocking
  5. Removable connector piece
  6. Base with power cord

START-UP

  1. Only place the base on a stable, level surface.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 10
  2. Insert the connector piece into the base.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 11
  3. Set the fan unit onto the connector piece.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 12
  4. Remove the HEPA-ESP Filter from its separate packaging.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 13
  5. Remove the back-grid of the fan unit
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 14
  6. Set the filter into the device.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 15
  7. Push it in until you feel a noticeable click.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 16
  8. Close the fan unit again with the back grid.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 17
  9. Plug the power cord into a power outlet.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 18
  10. Adjust the output using the control.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 19

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 20 Make sure to set the grid correctly as the device will otherwise not turn on.

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 21 Please note that when turning on the fan for the first time or after it has not been used for some time you might hear a slight crackling noise for the first few minutes. This is the HEPA-ESP filter gaining an electrical charge which allows it to function as a highly efficient air filter.

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 22 BONECO F220CC and BONECO F230CC are only different in that the BONECO F230CC includes a second connector piece.

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 23 You can use the fan unit with one, with a second or without connector pieces. It can be customized to your needs.

HANDLING

HANDLING

All BONECO “Clean & Cool” Fans are designed for easy handling. The output is adjusted in four levels using a single control: 0 › I › II › III › IV
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 24

ALIGNMENT

The fan unit can be manually tilted 270 degrees.
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 25 The fan unit does not rotate a full 360 degrees.
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 26

HEIGHT ADJUSTMENT

All electrical components are completely integrated in the connector. Therefore, you can adjust the height at any time by adding connector pieces or by pulling them off after pressing down the button to unlock them.
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 27 For safety reasons, a maximum of two connector pieces can be used at once for the BONECO F230CC and a maximum of one for the BONECO F220CC.
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 28

POSITIONING TIPS

NOTES ON OUTPUT

All BONECO “Clean & Cool” Fans are equipped with a high-performance fan that can move large amounts of air. Making use of this feature: Guide the air in a specific direction to achieve an uniform room climate. The following examples illustrate how to do this.

AIR-CONDITIONING SYSTEM (AC)

An air conditioner distributes temperature in various ways. Use the BONECO “Clean & Cool” Fan to move the warm air towards the air-conditioning system. This can be done directly or indirectly via air circulation, as shown in this image.
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 29

FRESH AIR

The BONECO “Clean & Cool” Fan helps you achieve better ventilation indoors. If cross-ventilation is not created, guide fresh air directly from the window into the desired room.
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 30

MULTIPLE FLOORS

In the summer, it can become hot and muggy on the upper floors. The powerful BONECO “Clean & Cool” Fan directs the cool air from the ground floor to multiple floors achieving a uniform temperature.
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 31

ROOMS WITH HIGH CEILINGS

In air-conditioned rooms with high ceilings, the cold air sinks to the floor while the warm air rises to the ceiling. Turn the BONECO Fan straight up for an air-shower sensation.
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 32

CLEANING THE HEPA-ESP FILTER

REMOVING THE FILTER
  1. Make sure the device is unplugged.
  2. Tilt the fan downwards and remove the back grid.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 33
  3. Use both hands to push in the locking mechanism of the HEPA-ESP filter lightly so it can be removed from the device.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 34
CLEANING BY HAND
  1. Use PH-neutral detergent (10 g / 1000 ml) in 40 °C water to wash.
  2. After washing, rinse with clean water, and dry with a clean soft cloth.
  3. Leave the filter in dry place for at least 5 hours to make sure it is completely dry before putting it back into the fan unit.
CLEANING BY DISHWASHER

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 35 Do not wash the Filter together with dishes or materials containing fat and grease.
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 36 Only use PH-neutral cleaning detergents suitable for your dishwashing machine.
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 37 Set the cleaning temperature not higher than 70 °C.
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 38 Only wash for one wash cycle and for no longer than 2 hours (including the drying).

  1. Put the Filter into the dishwashing machine.
  2. Take out the filter from the dishwashing machine, and check for damages or deformations to the Filter. Do not reinsert a damaged Filter into the device.
  3. After washing always check if the filter is completely dry. If necessary, leave the filter in a dry place for up to 5 hours to ensure it can completely dry before reinserting it into the fan.
  4. Always let the filter cool down to room temperature before putting back into the fan unit.
REINSERTING THE FILTER
  1. Reinsert the filter until the locking mechanism has clicked in securing the filter in the device.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 39
  2. Close the fan unit again with the back grid. Make sure the back grid is set it correctly as the device will otherwise not turn on.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 40
TROUBLE SHOOTING

With regular use, the filter should be cleaned at least once every 2 weeks. After some time without cleaning, the filter can give off a continuous clicking noise. When that happens it is necessary to clean the filter according to the cleaning instructions.

CLEANING

SAFETY INSTRUCTIONS

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 41 Always unplug the BONECO “Clean & Cool” Fan before you begin cleaning! Failure to do so can result in electric shock and fatal injury!
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 42Do not use alcohol or corrosive cleaning agents for cleaning.

CLEANING THE HOUSING

All BONECO “Clean & Cool” Fans are designed for low maintenance operation, even after years of use. In most cases, a dry cloth can be used for cleaning.
If stubborn dirt is present, clean the housing using a damp cloth. Add a small amount of dishwashing detergent to the water.

CLEANING THE FAN BLADES
  1. Tilt the fan unit upwards and loosen the safety screw.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 43
  2. Remove the front grill by turning it counterclockwise slightly.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 44
  3. Loosen the safety screw in the middle clockwise.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 45
  4. Remove the fan blades and clean them with a damp cloth.
  5. Put the unit back together by following the steps in reverse order.

When reattaching the front grid with the screw, pay attention to the position of the two half-circle marks on the front and make sure they form a full circle.
BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 46

DISASSEMBLY AND STORAGE

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 47 Please note that the removable connector pieces are detachable. When moving the unit to a new location, disassemble the unit into the detachable parts, transport the individual parts to the desired location, and then reassemble.

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 48 Storage is easiest and most efficient when you use the original packaging. Store the BONECO “Clean & Cool Fan” in a dry place.

  1. Unplug the power cord from the power outlet.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 49
  2. Press the release button on the upper connector piece.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 50
  3. Remove the fan by pulling firmly upwards.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 51
  4. Press the release button on the upper connector piece.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 52
  5. Remove all connectors by pulling firmly.
    BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 53

BONECO is a registered trademark of BONECO AG, Switzerland
BONECO North America Corp., 15821 Ventura Blvd, Encino, CA 91436

www.boneco.us

BONECO Clean & Cool Fan Instruction Manual  & troubleshooting 54

References

FAQ


Setting up BONECO Clean & Cool Fan Instruction Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using BONECO Clean & Cool Fan Instruction Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is BONECO Clean & Cool Fan Instruction Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for BONECO Clean & Cool Fan Instruction Manual

All symbols, colors and codes for BONECO Clean & Cool Fan Instruction Manual are explained in this instruction manual. You can find everything you need and moree