BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual

BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual & troubleshooting

BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual  & troubleshooting 1

BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual  & troubleshooting 2BG-UHDKVM-100
18Gbps HDMI over HDBaseT Extender
with Bi-directional IR (100M)
User Manual

Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.

Introduction

The BG-UHDKVM-100 18Gbps HDMI Extender can extend high definition video/audio signal, RS-232, bi-directional IR, and internet signal, at the distance of up to 328ft / 100 meters between transmitter and receiver via a single CAT6a/7 cable and support resolution up to [email protected] 4:4:4. The transmitter supports the ARC function and local audio extract. In addition, the extender is equipped with a bi-directional IR pass-through which allows for source and display control. It also supports USB KVM and PoC functions.

The extender offers the most convenient solution for HDMI extension via a single CAT cable with long-distance capability and is the perfect solution for any application.

Features

  • HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
  • Support 18Gbps video bandwidth
  • Video resolution is up to [email protected] YUV 4:4:4
  • The maximum transmission distance is 328ft / 100 meters via a single CAT6a/7 cable
  • Support ARC (Audio Return Channel) function
  • With bi-directional IR, RS-232, and CEC pass-through
  • Support USB KVM function
  • HDR, HDR10+, Dolby Vision, and HLG function supported
  • Supports PoC (Power over Cable) function
  • Compact design for easy and flexible installation.

Package Contents

Qty

Item

1 18Gbps HDMI over HDBaseT Extender (Transmitter)
1 18Gbps HDMI over HDBaseT Extender (Receiver)
1 IR Blaster cable (1.5 meters)
1 20~60KHz IR Receiver cable (1.5 meters)
4 Mounting Ear
2 3-pin Phoenix connector
1 24V/1A Locking Power adapter
1 User Manual

Specifications

Technical

HDCP Compliance HDCP 2.2 / HDCP 1.4
Video Bandwidth 18Gbps
Video Resolution 4K2K 50/60Hz 4:4:4
4K2K 50/60Hz 4:2:2
4K2K 50/60Hz 4:2:0
4K2K 30Hz 4:4:4
1080p, 1080i, 720p, 720i, 480p, 480i
All PC resolutions including 1920 x 1200
Color Space RGB / YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth 8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz YCbCr 4:2:2/4:2:0) 8-bit (4K60Hz 4:4:4)
HDMI Audio Formats LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby Digital Plus (DD+), DTS-ES, DTS HD Master, DTS HD-HRA, DTS-X
L/R Audio Formats PCM 2.0
SPDIF Audio Formats LPCM2.0, Dolby Digital, Dolby Digital Plus, DTS
ESD Protection Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact discharge)

Connection

Transmitter Inputs: 1x HDMI Type A [19-pin female] Outputs: 1x HDBT OUT [RJ45, 8-pin female]
1x SPDIF OUT [S/PDIF]
1×L/R OUT [3.5mm Stereo Mini-jack]
1×LAN [RG45]
Control: 1x IR IN [3.5mm Stereo Mini-jack]
1x IR OUT [3.5mm Stereo Mini-jack]
1x RS-232 [Phoenix jack]
1x SERVICE [Mini-USB, Update port]
1×USB HOST [USB Type B]
Receiver Inputs: 1x HDBT IN [RJ45, 8-pin female]  1x SPDIF IN [S/PDIF]
Outputs: 1x HDMI Type A [19-pin female] 1x LAN [RG45]
Control: 1x IR IN [3.5mm Stereo Mini-jack]
1x IR OUT [3.5mm Stereo Mini-jack]
1x RS-232 [Phoenix jack]
1x SERVICE [Mini-USB, Update port]
2×USB 2.0 [USB Type A]

Mechanical

Housing Metal Enclosure
Color Black
Dimensions Transmitter / Receiver: 165mm [W] x 88mm [D] x 18mm [H]
Weight Transmitter: 170g, Receiver: 165g
Power Supply Input: AC 100 – 240V 50/60Hz
Output: DC 24V/1A (Locking connector)
Power Consumption 13W
Operating
Temperature
32 – 104°F / 0 – 40°C
Storage Temperature -4 – 140°F / -20 – 60°C
Relative Humidity 20 – 90% RH (no condensation)
Resolution Distance
4K2K 296ft /90M
1080P 328ft /100M

Resolution / Cable Length

4K60 – Feet / Meters 4K30 – Feet / Meters

1080P60 – Feet / Meters

HDMI IN / OUT 16ft / 5M 30ft / 10M 50ft / 15M
The use of a “Premium High-Speed HDMI” cable is highly recommended.

Operation Controls and Functions

Transmitter Panel

BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual  & troubleshooting 3

Name

Function Description

Power LED Red LED is on when the transmitter is working. LED is off when the transmitter is on standby.
ARC LED Green LED is on when the ARC function is turned on.
SPIDER LED Green LED is on when the SPDIF OUT port outputs the audio signal returned from SPDIF IN on the receiver.
USB HOST Connect to PC for transmitting receiver’s USB data to the transmitter.
SWITCH Press the button to switch the output audio signal source for

SPDIF OUT and L/R OUT port.

SERVICE port Firmware update port.
 

DC 24V

DC 24V input for 24V 1A power adapter.
Note that the extender supports PoC function, it means that either transmitter or receiver is connected to a 24V/1A power supply, the other doesn’t need a power supply.
HDBT OUT RJ45 connector for connecting the HDBT IN port of receiver with CAT 5e/6 cable.
Connection Signal
Indicator lamp (on the left  side of  the  HDBT OUT port)
▪ Illuminate: The transmitter and Receiver are in good connection status.
▪ Flash: Transmitter and Receiver are in poor connection status.
▪ Dark: The transmitter and Receiver are not connected.
Data Signal Indicator lamp (on the right side of the HDBT OUT port) ▪ Illuminate HDMI signal with HDCP.
▪ Flash: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
HDMI IN HDMI source input.
IR IN IR input port for receiving the signal of IR remote.
IR OUT IR output port for control of source device. This IR output signal is from the IR IN port of the receiver.
L/R OUT 3.5mm stereo connector for analog audio output.
SPDIF OUT SPDIF connector for optical audio output.
RS-232 3-pin Phoenix connector for RS-232 command transmission. The RS-232 command will pass through from transmitter to receiver or receiver to transmitter.
LAN RJ45 connector for connecting Hub or router.
Receiver Panel

BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual  & troubleshooting 4

Name

Function Description

Power LED Red LED is on when the receiver is working. LED is off when the receiver is on standby.
ARC LED Green LED is on when the ARC function is turned on.
SPIDER LED Green LED is on when the SPDIF OUT port outputs the audio signal returned from SPDIF IN on the receiver.
Two USB 2.0 ports Connect to a USB device.
SWITCH Press the button to switch the output audio signal source for SPDIF OUT and L/R OUT port.
SERVICE port Firmware update port.
DC 24V DC 24V input for 24V 1A power adapter.
Note that the extender supports PoC function, it means that either transmitter or receiver is connected to a 24V/1A power supply, the other doesn’t need a power supply.
HDBT IN RJ45 connector for connecting the HDBT OUT port of transmitter with CAT 5e/6 cable.
HDMI OUT HDMI output for display.
IR IN IR input port for receiving the signal of IR remote.
IR OUT IR output port for control of display device. This IR output signal is from IR IN port of the transmitter.
SPDIF IN SPDIF connector for optical audio input.
RS-232 3-pin Phoenix connector for RS-232 command transmission. The RS-232 command will pass through from transmitter to receiver or receiver to transmitter.
LAN Connect to an Internet device such as a PC or laptop.
Audio Signal Output Switching

Switch the output audio signal source for SPDIF OUT and L/R OUT port via the “Switch” button on the panel (the corresponding LED will illuminate). The states of ARC LED and SPDIF LED to indicate the specific output audio signal source, as shown in the table below:

ARC LED SPDIF LED

Output Audio Signal Source for SPDIF OUT port

State State and L/R OUT port
On Off The audio signal returned from HDMI (display device) on the receiver
Off On The audio signal returned from SPDIF IN on the receiver
Off Off The audio signal extracted from the transmitter

IR Pin Definition
IR Receiver and Blaster pin’s definition as below:

BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual  & troubleshooting 5

Note: IR remote sends a signal at the distance of 0~5 meters / 0~8 meters with the angle of ± 45° in the vertical direction.

Application Example

BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual  & troubleshooting 6

Second Year Assurance

BZB Gear wants to assure you peace of mind. We’re so confident in the quality of our products that along with the manufacturer’s one-year limited warranty, we are offering free second-year warranty coverage upon registration*.
Taking advantage of this program is simple, just follow the steps below:

  1. Register your product within 90 days of purchase by visiting BZBGear.com/warranty.
  2. Complete the registration form. Provide all necessary proof of purchase details, including serial number and a copy of your sales receipt.
    For questions, please call 1.888.660.2962 or email [email protected].

For complete warranty information, please visit BZBGear.com/warranty or scan the QR code below.

BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual  & troubleshooting 7http://l.ead.me/bb5EEJ

*Terms and conditions apply. Registration is required.

Mission Statement

BZB Gear manifests from the competitive nature of the audiovisual industry to innovate while keeping the customer in mind. AV solutions can cost a pretty penny, and new technology only adds to it. We believe everyone deserves to see, hear, and feel the advancements made in today’s AV world without having to break the bank. BZB Gear is the solution for small to medium-sized applications requiring the latest professional products in AV.

We live in a DIY era where resources are abundant on the internet. With that in mind, our team offers system design consultation and expert tech support seven days a week for the products in our BZB Gear catalog. You’ll notice comparably lower prices with BZB Gear solutions, but the quality of the products is on par with the top brands in the industry. The unparalleled support from our team is our way of showing we care for every one of our customers. Whether you’re an integrator, home theater enthusiast, or a do-it yourself-er, BZB Gear offers the solutions to allow you to focus on your project and not your budget.

FAQ


Setting up BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual

All symbols, colors and codes for BZBGEAR BG-UHDKVM-100 – 18Gbps HDMI over HDBaseT Extender User Manual are explained in this instruction manual. You can find everything you need and moree