CERWIN-VEGA 17595484 Stroker Pro Series Subwoofer
Cerwin Vega Mobile Subwoofers Congratulations for purchasing a Cerwin Vega Mobile Pro Driver for your car audio system. You have chosen Cerwin Vega Mobile
brand because you deserve the best! Cerwin Vega Mobile Pro Divers are designed and engineered to reproduce extreme sound in and out side your vehicle! Authorized Cerwin Vega Mobile dealers can help guide you with various applications and technical information in order to customize your sound system according to your own listening preference. ltis highly recommended that you have your new Pro Drivers installed by an authorized Cerwin Vega Mobile dealer to ensure that you receive the utimate listening experience fyou decide to install the Pro drivers by yourself, please thoroughly read through this manual before getting started. This manual will help familiarize yourself with these drivers and guide you through the installation process and procedures with recommended f you decide to install the Pro divers by yourself, please thoroughly read through this manual before getting started.
This manual will help famillarize yourself with these drivers and guide you through the installation process and procedures with recommended enclosure designs for this paricular product. Please contact your local authorized Cerwin Vega Mobile dealer if you have any questions regarding the instructions in this manual or the Pro Drivers application capabilies. If you require additional assistance, please contact the Cerwin Vega Mobile Technical Support Department during business hours at 213.261.4161
The next generation of Cerwin Vega Pro Audio Mobile divers features and specifications are on the next few pages. Makes sure to read this manual and get fo know your divers and the many applications and set up scenarios available to you.
- 10 PRO FulRange Speater
- 500W MAX/250W RMS Powar Honding
- Heay duty industhidl ast akninum basket
- Advanced VYolca Col hect shk deslgn for better heat disiparion
- 2.5″ Singlo lnyor high teomnp woico coi with blod coated VC form
- Yoice Coi Bias control for precie huning
- High Densiy, High B/L motor sructua for high powear handing
- Patant Pending design
- Opiond Fres Pi Epanded Matd Gdl pantf CNP 1061
- 8 PRO FuHRange Spoukar
- 400W MAX/200W BHS Power Handing
- Heavy duty rdustrid cast dumirum kaskat
- Adhvanced Vaice Coil heat sink design for bestar heat disiparion
- 2.0 Sinde Layor high tomp voica coil with blaxk coatod VC former
- Kaice Cail Bias comrol for pradse funing
- Hioh Densty, Hgh B/L motor smuduwe kr hNgh power handing
- Patent Pendirg design
- Opiond FressRt Egandod Matul 6rl (paté CVNPCLAG)
- 6.5″ PRO Ful-Ronge Speaker
- 200W MAK/ 100 RS Power Honding
- Heavy duty industid ast okuminum bustet
- Advancad Yokca Col hat sink design for batler haat disipalon
- 1.75 Singe Lnyar high tamp vokca cal with black coatod E fomo
- Yoice Col Bics contrel For prOdse tuning
- High Donsiy, igh B/l motor strudure for High pouer handling
- Prtent Pending design
- Opriond Pros Fr Expanded Metal GHl (partfCVMPCL6.56)
- 8 PRO FulHRange Speokor
- 400W MAX/200W RMIS Powea Handing
- Cast Auminum Aloy Baskot
- Propaietary Lighthwesight Poper Ribbed Cone
- Cast Auminum Fhase Phy
- Oversized Sping loadad Termals
- Re-budable Quick RaplocMmant Design (part CVMPCLA.0TD)
|Total Diametre (A)||in.(mm||) 7.08(180)||8.54(217)||19.66 (271)||TBD||3.4X4.19(86.5X106.5)|
|MounitngDepth (C)||in.(mm||) 2.93(74.5)||3.24(82.5)||4.57 (116.25)||TBD||2.0(52)|
|TotalDepth (D)||in.(mm||) 3.74(95)||4.09 (104)||5.5 (141)||TBD||2.5(63)|
|CVMPCl6,5 93.2||CVMPClS,O 95||CVMPCl1 0
|mM s( )||11.3||20||32.7||NIA||NIA|
|mX amxm( )||u||1.0||1.7||NIA||NIA|
System Design – Passive,/Active
TYPICAL “BHAMPED” SYSTEM USING PASSIVE CROSSOVERS The CVMPCLI.0 comes with a special 12dB per octove crossover. It is HIGHLY recommended thot this be used ot ALL fimes- UNLESS you are using an active crosssover set at above 4ktz. This system, shown is “BiAmped, but not ‘Fully” octive. Front channels of this 4 chanel amplifier are driving the mid bass drivers. Rear channel are driving the tweetes. Ihe mid boss is shown with a 0.ImH inductor in series to cross over the midbass to 6Khz with a 6dB roloff. This setup makes it easier to adjust level of ths midbass versus the tweeter.
System Design- Fully Active
TYPICAL “FULLY ACTIVE” SYSTEM The CVMPCLI.0 horn tweeters and Midbass drivers can be run in multiple pairs. It is HIGHLY recommended to Use some kind of EQ/processor. IF you plan on doing ALL active setup.seriously think about purchasing a DSP processor. Using a DSP processor makes CVMPO High Output Mid set to 70Hz
it much easier to control and fine your system.
Instaling the Speckers Your new Carwin Vega HMobile saries speakers were designed with the flaxibility to be installed in multiple Iocations. Howver, to ensure the best paríormanca possible, it is important to isolata the front sound waoves of the speaker from its rear sound waves. This is done by seauraly mounting the speaker to a flat surface known 5 a batile. AMake sure to seal the speaker to ensure there are no air leaks around its from. Selecting a Location Since these are “Pro Drivers” we know the likelyhood of mounting in stock locations is prety nonexistaont. This means bask avdio concepts should be thought of when instaling. H instaling muliple midbass or weeter divers it is ALMWAYS best to mount in vertical rows. This gives the best verical and horizonatol dispersion charteristics of the divers. Venting for porting) is not necesary. Huliple micbass drivers should be used to every single hom driver (hom tweeters tend to be 10d8 louder than the mids). Line the wals of the endosures with deedliner and polyil. f you want to build vented enclosures the Theile/Smal paramsters are on page 4. Our recommended computer madeling saftware i WinlSD Pro. Or call us and we can help. We HIGHILY recommend that for the BEST sound you put a sound deadaning mot on thae door “skin”, The mora domped” your car is… .he brtter it willuftimately sound.
Tweeter Diaphram replacement
The Cerwin Yega Mobile CVMPCLI.0 and CVMPCI4.0 twecter dhaphram can be reploced. But you must be very carehul doing it. The port nunmber is CVMPCL4.0TD for the 4 inch lweter, and CYMPLI.0TD for the 1 inch tweeter. Below is u cutway drawing to show you how it is done. More detailed instructions come with the repacemet diaphram on how to replace.
Thonk you for purchsing a Corwin Voga Mable product and we hope to provide you with countiess hours of lstoning enjoyment. Please take a brief moment to register your new product. By registering your new produkt, you will receive benefits such os: Important product notificarions that moy pertain to your purchase. Confimation and record of ownership in case of loss or theft. Knowledgeable customen service and technical asistonce pertaining to your product. Register your new peoduct by completely fling out this Product and Wonanty Registruation card or register online at www.cerwinvegamabila.com.
Ragistration is vokuntary and failure to rogister will not diminish your limited warranty rights. Limited Warranty (U.SA) Cerwin Vega Mobile warrants all af our amplifiers and speakers to be free of defects in materials and workmanship for a period of one (1) year. This wananty is nan-Transferable and applies only to the original purchaser from an authorizad Cerwin Vega Mobile dealer, If serice is required and necessary under this wairanty due to manutacturing detect or mafunction, then Corwin Yega Mobile will repoir and/or replace detecive product with eiher new or remanutachured like product at no dharge ot our disaefhon. Damage to the product caused by tha following wl nor be covrad under this warranty: abuse, accident, misuse, naglect, modifications, r9pairing attempts, sellet/installer misrepresentation. This wananty does not cover any incidental, consequential, or cosmetic damage dve to acciderts or normal waar and toar, nor does it cover the cost of removing or reinstallation of the product. Warranty is void if the producr’s serial number has been removed, desuced, and/or tumpared with.
Ihis wamanty does not cover any inddental, consequenial, or cosmefic donage due to ocidets or normal waar and foar, nor does it cover the cost of removing or reinstallation ot the product. Waranty is void f the producr’s sarial numbar has baen removed, dofuced, and/or rampared with. Waranty Procedure: We recommend that you contact your Cervin Yega Mobile purthorized dealer where your orginal purchase was mode toinifiate ol warronty daims. Our authorized dealers cun guide you through fhe warranty procedure fo ersure thot yoUr daim will be processed in a timey manner, All warranty returns must be accompanied with a proaf of purchase (a copy of the original sales receipt) and be shipped freight prepaid to our fadity with gn RA (Rotum Authorization) number dearty marked Om the outside of the package. Ditect rofuns from consumers or nonauthorized dealers will ba refused i shipped without a valid RA number authorized by Cervin Vaga Mobile berorehand.
Products purchased outside of the U.SA. ore covered only by that country’s distributor ond nat by Cerwvin Vega Mobile U.S.A.