CREATE Mill Easy Electric Grinder User Manual

CREATE Mill Easy Electric Grinder User Manual & troubleshooting

CREATE Mill Easy Electric Grinder User Manual  & troubleshooting 1

CREATE Mill Easy Electric Grinder
CREATE Mill Easy Electric Grinder User Manual  & troubleshooting 2


When using any electrical appliance, the following basic safety precau­tions should always be observed

  • Make sure that the voltage and frequency of the circuit correspond to those indicated on the rating label of the appliance.
  • The appliance may only be used for its intended purpose. The manufac­turer shall not be liable for damage resulting from improper use or incor­rect handling.
  • Do not use outdoors or for commercial purposes. This appliance is intend­ed for domestic use only. If used for commercial purposes, the warranty will be void.
  • Always disconnect the appliance before cleaning, getting close to moving parts, and when not in use.
  • Do not connect it until it is completely assembled.
    Children and animals should be supervised to ensure that they do not play with the appliance or packaging.
  • This appliance may be used by children and persons with reduced phys­ical, sensory or mental abilities or lack of experience and knowledge if they have been safely supervised or instructed in the use of the appliance and understand the dangers involved.
  • Never immerse the cable, plug, or main body in water or other liquids. If the appliance should fall into water, immediately unplug it from the mains and have it checked by an expert before using it again. It may cause fire, electric shock, injury or death.
  • The blades are very sharp. Always be very careful.
  • Never leave the appliance unattended during operation.
  • Do not lift or operate the appliance if the power cable or plug is damaged,or if the appliance is malfunctioning or has been dropped or damaged in any way. In case of damage, please contact the after-sales service. A damaged cable or plug must only be replaced by the manufacturer or a qualified per­son to avoid injury.
  • Use only accessories recommended by the manufacturer.
  • Do not let the cable hang over the edge of a table or countertop. Do not operate the appliance near hot surfaces, avoid proximity to open fires and all sources of heat and ignition.
  • The maximum capacity is 40g. Do not use the appliance for more than 1 min­ute at a time. Then wait 10 minutes to allow the motor to cool down.
  • Do not process more than three batches immediately after one another. Al­low the unit to cool down to room temperature before proceeding.

PARTS LISTCREATE Mill Easy Electric Grinder User Manual  & troubleshooting 3

  1.  Lid.
  2.  Blade.
  3.  Container.
  4.  Fixed ring.
  5. body of the grinder.
  6. Motor
  7.  Base.
  8.  Cable compartment.
  9.  Switch.


Remove and dispose of all packaging materials property and inspect the product for possible damage. Do not use the appliance if it is visibly dam­aged, contact the after-sales service.
If the outlet does not match the plug on the appliance, have it replaced by a qualified professional.

  1.  Place the appliance on a flat, stable surface.
  2.  Turn the lid counterclockwise and lift it up.
  3.  Fill the container with the desired amount of coffee beans. Do not overfill the container.
  4.  Replace the lid on the container and close it by turning it clockwise. This appliance is equipped with a safety system that prevents it from function­ing if the lid is not placed properly.
  5.  Do not attempt to operate the unit without the lid on.
  6.  Plugin the appliance. To operate the coffee grinder, press the lid and hold until the desired degree of grinding is achieved.
  7.  Unplug the appliance and place the ground coffee in an airtight container.


  • Always store your coffee in an airtight container to preserve flavor and aroma.
  • Grind only the amount of coffee needed each time to ensure optimal flavor.
  • Do not overfill the coffee bean container. The recommended amount is one tablespoon of coffee beans per cup of coffee.
  • This grinder is only suitable for dry and brittle foods. Do not grind fatty foods (e.g., peanuts) or hard products (e.g., rice).


  • Always unplug the appliance before cleaning and repairing it.
  • Never immerse the appliance in water or other liquids for cleaning.
  • Do not clean the unit with alcohol or solvents.
  • Use the brush to remove ground coffee residue. Do not touch the blades to avoid possible injury.
  • To remove any residue or odor in the container, grind a tablespoon of baking soda and then clean it well.
  • All removable parts are dishwasher safe (on the top shelf). Do not place any parts on the bottom shelf and never immerse the main unit in water or other liquids.
  • Clean the outer surface with a soft cloth. Store excess cable by pushing it one section at a time into the cable storage compartment in the base.


Setting up CREATE Mill Easy Electric Grinder User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using CREATE Mill Easy Electric Grinder User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is CREATE Mill Easy Electric Grinder User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for CREATE Mill Easy Electric Grinder User Manual

All symbols, colors and codes for CREATE Mill Easy Electric Grinder User Manual are explained in this instruction manual. You can find everything you need and moree