ELBA EBG-M1550 Blender Owner’s Manual

ELBA EBG-M1550 Blender Owner’s Manual & troubleshooting

ELBA EBG-M1550 Blender Owner’s Manual  & troubleshooting 1

BLENDER
MODEL: EBG-M1550(WH)
Owner’s ManualELBA EBG-M1550 Blender Owner’s Manual  & troubleshooting 2

Please read this manual carefully before operating your set.
Retain it for future reference.
Record the model number and the serial number of the set.
See the label attached on the set and quote this information to your dealer when you require service.
For The Warranty Terms & Conditions, Please Refer To Warranty Certificate.

IMPORTANT SAFEGUARDS

Before using the appliance, basic precautions should always be followed including the following:

  1. Read all instructions before using.
  2. Do not operate the appliance with a damaged power cord or plug, after the appliance malfunction, or if it is dropped or damaged in any manner. Return the appliance to the nearest authorized dealer or after-sales service center for examination, repair, electrical or mechanical adjustment.
  3. Do not use the appliance if the plug, the mains cord, or other parts are damaged
  4. Do not let the power cord hang over the edge of the table or counter or hot surface.
  5. Do not place the appliance on or near a hot gas or electric burner, or in a heated oven.
  6. Do not leave the appliance unattended while operating.
  7. Do not touch the cutting edges of the blender blade unit when you clean it. They are very sharp and you could easily cut your fingers on them.
  8. Do not operate the appliance for more than 2 minutes continuously at a time. If you have not finished processing after 2 minutes, switch off the appliance and let it cool down before you operate it again.
  9. To prevent failure of the appliance, make sure that no food or liquids enter the connection point between the blade unit interface and the motor base.
  10. Never reach into the plastic blender with your fingers or an object while the appliance is running.
  11. Never use any accessories or parts from other manufacturers or that ELBA does not specifically recommend.
  12. Oversized foods or metal utensils must not be inserted into the appliance as they may cause fire or risk of electric shock.
  13. If foods stick to the wall of the blender, switch off the appliance and unplug it. Use a spatula to remove the foods from the wall.
  14. Always make sure the jar cover is properly closed/assembled on the plastic jar and the lid is inserted properly in the jar cover before you switch on the appliance.
  15. Never immerse the motor base of the blender in water or any other liquids nor rinse it under the tap. Use only a moist cloth to clean the motor base.
  16. Close supervision is necessary when your appliance is being used near children or infirm persons.
  17. Always unplug the appliance before you assemble, dissemble or make adjustments to any of the parts.
  18. Do not operate the appliance for other than its intended use.
  19. Do not use this blender outdoors.
  20. This appliance is for domestic use only.
  21. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliances by a person responsible for their safety.
  22. Children should be supervised to ensure that they do not play with the appliance.
  23. Save these instructions for future reference.

PRODUCT DESCRIPTIONSELBA EBG-M1550 Blender Owner’s Manual  & troubleshooting 3

ASSEMBLE AND OPERATE THE APPLIANCE

  1. Unpack the appliance and place it on a flat horizontal countertop. Check all the parts whether all in good condition.
  2. Clean the removable parts before using them.
  3. Make sure that the control knob is switched to the “0” position. (Fig 1
  4. Put the ingredients into the plastic jar.
  5. Mount the measuring cup onto the jar cover. Close the plastic jar with a jar cover.
  6. Insert the plastic jar onto the motor base and secure it tightly.
  7. Power on the appliance and select the desired level of power.
  8. Always switch off the appliance by setting the control knob to the “0” position before you open the jar cover.
  9. Unplug the plug from the wall outlet after use.

TIPS FOR BLENDER

  • Wash the foods (fruits, vegetables, etc.) that are to be blended (peel the skin or remove pits when necessary). Cut them into pieces to be fit for blending.
  • Put the sliced foods into the plastic jar and put on the jar cover and measuring cup.
  • Each time of blending, do not put more than half of the cup scale (approximate 0.5 liters) of foods in it. Too small of a quantity is not preferable either. A proper quantity of water should be added during blending.
  • Power on the appliance and adjust the switch to speed “1” (low speed) or speed “2” position(high speed), and the blender begins to work. It only takes minutes to blend foods into small pieces. Then adjust the switch to the “0” position to turn off the blender, detach the plastic jar and pour out blended foods.
  • The blender will also operate when the switch is turned to the “Pulse” position. When the switch is loosened, it will return to the “0” position and automatically cut off the power. This function is designed for short-time blending (a few seconds), which makes it easy to control the blending results.
  • Do not operate the appliance for more than 2 minutes continuously at a time. If you have not finished processing after 2 minutes, switch off the appliance and let it cool down before you operate it again.
  • There is a safety interlock device at the bottom of the jar, if the jar is not assembled in place, the blender will not operate.

Note: When using the blender with full load capacity or blend for hard fruits and vegetables, ensure to adjust the switch to speed “2” position (high speed). Do not use low speed to blend for full load capacity, it will cause damage on the motor due to insufficient torque. When motor speed is found too slow, try to adjust to a higher speed to blend or adjust the speed to “0” to stop blending.

TIPS FOR GRINDER

  • Food (bean, rice, peanut, broad bean, coffee bean, etc.) that are to be milled must be sun-dried with foreign materials removed.
  • Put food into the grinder and lock it onto the motor base. (Fig 2) Do not add in water when grinding. Je (Fig 4), then empty the bowl and serve. Do not run the appliance for more than 30 seconds continuously at a time. If you have not finished processing after 30 seconds, switch off the appliance and let it cool down before you operate it again.

ELBA EBG-M1550 Blender Owner’s Manual  & troubleshooting 4

CLEANING AND MAINTENANCE

  1. Unplug the appliance.
  2. Disassemble all removable parts before cleaning.
    Note: Do not rinse the motor base under water tap. Do not use abrasive cleaning agents, sources, etc. to clean the motor base!
  3. When cleaning the plastic jar, be careful of the blades as it is very sharp.
  4. Clean the motor base with a moist cloth.
  5. Clean the removable parts immediately after use.

SPECIFICATIONS

  1. Voltage : 220-240V~, 50-60Hz
  2. Power : 500W
  3. Short time operation: each operation time cannot exceed 2 minutes and stop for 2 minutes. Stop for 30 minutes after every 5 operations.

ENVIRONMENT-FRIENDLY DISPOSAL

ELBA EBG-M1550 Blender Owner’s Manual  & troubleshooting 5You can help to protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipment to an appropriate waste disposal center.

FAQ


Setting up ELBA EBG-M1550 Blender Owner’s Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using ELBA EBG-M1550 Blender Owner’s Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is ELBA EBG-M1550 Blender Owner’s Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for ELBA EBG-M1550 Blender Owner’s Manual

All symbols, colors and codes for ELBA EBG-M1550 Blender Owner’s Manual are explained in this instruction manual. You can find everything you need and moree