Ender 3D Printer User Manual

Ender 3D Printer User Manual & troubleshooting

Ender 3D Printer User Manual  & troubleshooting 1

To be the Chief Evangelist
Ender-3 Pro Series 3D Printer

Guide Book
【To make Top-quality 3D printer 】Ender 3D Printer User Manual  & troubleshooting 2

◆ This guide is for the Ender-3 Pro Series of 3D printers.
◆ Select the correct input voltage to match your local mains (230V or 115V)
◆ Because of software/hardware upgrades and model differences, new revisions may not be listed in this guide.
◆ Please plug the power cord into a three-hole power jack.
◆ Detailed instructions for use are available on the SD card.

Notes

  1. Do not use the Printer in any way other than described herein to avoid personal injury or property damage.
  2. Do not place the Printer near flammables, explosives, or heat sources. It is best to place it in a well-ventilated, low-dust environment.
  3. Do not expose the Printer to violent vibration or any unstable environment. This will cause poor print quality.
  4. The filaments recommended by the manufacturer are preferred to avoid clogging in the hot end and/or Printer damage.
  5. Do not use any other power cable than the one supplied. Use a grounded three-prong power outlet.
  6. Do not touch the nozzle or hotbed during printing. Keep hands away from the machine while in use to avoid burns or personal injury.
  7. Do not wear gloves or loose clothing when operating the Printer. These loose particles can become caught in moving parts and cause personal injury or Printer damage.
  8. Clean off filament from the nozzle tip with the provided pliers before the nozzle cools. Do not touch the nozzle directly. This can cause personal injury.
  9. Clean the Printer frequently. With the machine powered off, clean the printer body with a dry cloth to remove dust, adhered printing materials, and foreign objects on guide rails. Use glass cleaner or isopropyl alcohol to clean the print surface before every print for consistent results.
  10. Children under 10 years of age should not use the Printer without supervision.

Preface

Dear consumers,
Thank you for choosing our products. For the best experience, please read the instructions before operating the Printer. Our 3D team is always ready to provide you with assistance. Please contact us via the phone number or e-mail address provided at the end when you encounter any problem with the Printer.
For a better experience in using our product, you may learn how to use the Printer in the following ways:
1. View the accompanying instructions and videos on the SD card.
2. Visit our official website at www.creality3d.cn You will find relevant software/hardware information, contact details, and operation and maintenance instructions on the website.

IntroductionEnder 3D Printer User Manual  & troubleshooting 3

1 SD Slot and USB Port 9 Power
2 Control Box 10 Y Limit Switch
3 Print Surface 11 Y Stepper
4 Control Knob 12 Coupling
5 Display Screen 13 Z Stepper
6 Nozzle Assembly 14 Z Limit Switch
7 Spool Holder 15 X Limit Switch
8 Extruder (E) Stepper 16 X Stepper

Screen Information

Information DisplayedEnder 3D Printer User Manual  & troubleshooting 4Ender 3D Printer User Manual  & troubleshooting 5

Loading Filament

1. Preheat
Method 1Ender 3D Printer User Manual  & troubleshooting 6

Method 2Ender 3D Printer User Manual  & troubleshooting 7

2. FeedingEnder 3D Printer User Manual  & troubleshooting 8

Press and hold the extruder lever then insert 1.75mm filament through the small hole of the extruder. Continue feeding until you see filament come out the nozzle.

Tip: How to Replace the Filament?

  1. Cutting filament near the Extruder and slowly feed new filament until they are fed into the new filament.
  2. Preheating the nozzle and withdraw the filament quickly and feed the new filament.

Bed Leveling

Ender 3D Printer User Manual  & troubleshooting 9

1. Prepare →Auto Home. Wait for the nozzle to move to the left/front of the platform.Ender 3D Printer User Manual  & troubleshooting 10

2. Prepare→Disable Steppers(Close stepper drive,release motor)

Ender 3D Printer User Manual  & troubleshooting 11

 

3. Move the nozzle the front/left leveling screw and adjust the platform height by turning the knob underneath. Use a piece of A4 paper (standard printer paper) to assist with the adjustment, making sure that the nozzle lightly scratches the paper.
4. Complete the adjustment of the screw on all 4 corners.
5. Repeat above steps 1-2 times if necessary.

Ender 3D Printer User Manual  & troubleshooting 12

Software InstallationEnder 3D Printer User Manual  & troubleshooting 13

1. Double click the Cura icon to install the Cura Slicing Software.

Ender 3D Printer User Manual  & troubleshooting 14

2. Start Cura from the Start Menu.Ender 3D Printer User Manual  & troubleshooting 15

3. Select Other→Creality CR-10→Printer Name: Ender-3 Pro→Add Printer.
4. Setting→Printer→Manage Printers…
5. Change Printer Settings to (220,220,250).

Preparing to Print

1.Slicing
Insert SD card into a computer with Reader.Ender 3D Printer User Manual  & troubleshooting 16

2.PrintingEnder 3D Printer User Manual  & troubleshooting 17

Troubleshooting

Ender 3D Printer User Manual  & troubleshooting 18

Circuit Wiring Diagram

Ender 3D Printer User Manual  & troubleshooting 19

Ender 3D Printer User Manual  & troubleshooting 20https://www.facebook.com/groups/1700252256935330/

Ender 3D Printer User Manual  & troubleshooting 21

Shenzhen Creality3D Technology CO.,LTD.
After-Sales Service Tel: +86 400 6133 882 +86 755 8523 4565
Official Web site : www.creality3d.cn
Company Address:12th Floor, Building No.3, Jinchengyuan Industrial Area,
Tongsheng Community, Dalang Street, Longhua District, Shenzhen

FAQ


Setting up Ender 3D Printer User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Ender 3D Printer User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Ender 3D Printer User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Ender 3D Printer User Manual

All symbols, colors and codes for Ender 3D Printer User Manual are explained in this instruction manual. You can find everything you need and moree