Energizer Remote Controlled LED Light Bars User Guide

Energizer Remote Controlled LED Light Bars User Guide & troubleshooting

Energizer Remote Controlled LED Light Bars User Guide  & troubleshooting 1

Energizer Remote Controlled LED Light Bars

Energizer Remote Controlled LED Light Bars User Guide  & troubleshooting 2

BATTERY INSTALLATION

  1. Slide of narrow battery compartment cover.
  2. Insert batteries, noting polarity.Energizer Remote Controlled LED Light Bars User Guide  & troubleshooting 3

Remote: To replace exhausted battery, slide the battery holder out, following the drawing on the bottom of the remote. Insert 1 fresh CR2025 battery, noting polarity.

Replace the battery holder:

Important: Different types of batteries, or new and used batteries, should not be mixed. Exhausted batteries should be removed from the fixture and disposed of properly.Energizer Remote Controlled LED Light Bars User Guide  & troubleshooting 4 Surface Mounting

  1. Clean the mounting surface of any dust or debris.
  2. Peel the paper backing from the metal strip and press it firmly onto the surface
  3. Place the magnetized back of the light bar onto the mounted metal strip.
    Note: You can mount the light to other magnetic surfaces without using the metal strip.Energizer Remote Controlled LED Light Bars User Guide  & troubleshooting 5

REMOTE OPERATION:

  1. On the remote, press the ON button to turn the lights on, or press the OFF button to turn them off.
  2. Use the + and – buttons to brighten or dim the lights.
  3. The 10%, 40%, 80% and 100% buttons allow you to go directly to your desired output level
  4. The 10min, 30min, 1hr and 2hr buttons automatically turn the lights off after the number of minutes indicated on the button.
    Note: When using the remote, point directly at the puck for proper connection.Energizer Remote Controlled LED Light Bars User Guide  & troubleshooting 6

OPERATIONEnergizer Remote Controlled LED Light Bars User Guide  & troubleshooting 7

ON/OFF/IR Switch; Manually turn the light ON or OFF and activate the light bar’s connection with the IR remote.

CAUTION

  • BATTERIES MAY LEAK HARMFUL LIQUIDS OR IGNITABLE MATERIALS OR EXPLODE CAUSING INJURY OR
    PRODUCT DAMAGE
  • DO NOT MIX OLD AND NEW OR OTHER BATTERY TYPES
  • REPLACE ALL BATTERIES AT THE SAME TIME
  • REMOVE BATTERIES IF PRODUCT IS TO BE UNUSED FOR EXTENDED PERIOD OF TIME.

MADE IN CHINA
©2021 Energizer. Energizer and certain graphic designs are trademark of Energizer Brands, LLC and related subsidiaries and are used under license by
Jasco Products Company, LLC. Contact our U.S.-based Consumer Care at
1-800-654-8483 between 7AM–8PM,M–F,
Central Time . 90-day warranty. Visit www.byjasco.com for warranty details.Energizer Remote Controlled LED Light Bars User Guide  & troubleshooting 8

References

FAQ


Setting up Energizer Remote Controlled LED Light Bars User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Energizer Remote Controlled LED Light Bars User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Energizer Remote Controlled LED Light Bars User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Energizer Remote Controlled LED Light Bars User Guide

All symbols, colors and codes for Energizer Remote Controlled LED Light Bars User Guide are explained in this instruction manual. You can find everything you need and moree