eufy RoboVac Cleaning User Guide

eufy RoboVac Cleaning User Guide & troubleshooting

eufy RoboVac Cleaning User Guide  & troubleshooting 1

eufy RoboVac Cleaning

eufy RoboVac Cleaning User Guide  & troubleshooting 2

Using Your RoboVaceufy RoboVac Cleaning User Guide  & troubleshooting 3

  • If you cannot remove the objects, check whether RoboVac can return to the Charging Base normally; if not, contact eufy customer service for help.
  • Always keep the Charging Base plugged in, otherwise RoboVac will not automatically return.
  • When the Charging Base connects to AC power, the LED indicator on the Charging Base turns off.

eufy RoboVac Cleaning User Guide  & troubleshooting 4

Fully charge RoboVac before use. The LED indicator on RoboVac breathes blue or purple while charging, and is solid blue when fully charged.

eufy RoboVac Cleaning User Guide  & troubleshooting 5

Download the EufyHome app and follow the instructions in the app to complete the Wi-Fi connection. Then you can control RoboVac via this app. Refer to the Owner’s Manual for details.eufy RoboVac Cleaning User Guide  & troubleshooting 6

Using Mopping System

eufy RoboVac Cleaning User Guide  & troubleshooting 7eufy RoboVac Cleaning User Guide  & troubleshooting 8eufy RoboVac Cleaning User Guide  & troubleshooting 9eufy RoboVac Cleaning User Guide  & troubleshooting 10

 

Important Tips

When using for the first time, follow RoboVac to observe and resolve any problems that may occur.eufy RoboVac Cleaning User Guide  & troubleshooting 11

  • Remove power cords and small objects from the floor that may entangle RoboVac.
  • Fold tasseled edges of area rugs underneath to prevent tangling RoboVac. Avoid cleaning very dark-colored high-pile rugs or rugs thicker than 1.02 in/26 mm as they may cause RoboVac to malfunction.
  • Keep RoboVac away from spaces lower than 4.17 in/106 mm to prevent RoboVac from getting stuck. If necessary, place a physical barrier to block off the problem areas.
  • Keep RoboVac away from wet areas during cleaning.
  • RoboVac may climb on top of objects less than 0.67 in/17 mm in height (the height will be reduced if the mopping module is installed). Remove these objects if possible.
  • Anti-drop sensors will prevent RoboVac from tumbling down stairs and steep drops in most cases. Sensors are less effective if dirty or used on carpeted/reflective/very dark-colored floors. It is recommended to place physical barriers to block off areas where RoboVac may fall.

Place physical barriers in front of fireplaces and areas that may cause damage to RoboVac if entered.

eufy RoboVac Cleaning User Guide  & troubleshooting 12

References

FAQ


Setting up eufy RoboVac Cleaning User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using eufy RoboVac Cleaning User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is eufy RoboVac Cleaning User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for eufy RoboVac Cleaning User Guide

All symbols, colors and codes for eufy RoboVac Cleaning User Guide are explained in this instruction manual. You can find everything you need and moree