Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual

Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual & troubleshooting

Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual
Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 1

Before using this product, please be sure to read carefully this instruction manual and keep it safe for further reference

Thank you very much for choosing our products! Please read this manual carefully before using the product.

Front-end interface function description

Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 2

  1. Display
  2. 6.35 headphone output jack
  3. ON/OFF/input mode selection key VOL+/-(short press switch, again short press select input channel, long press switch it off,increase clockwise and decrease counterclockwis)

back interface function specification

Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 3

  1. Bluetooth antenna interface
  2. PC-USB input jack
  3. Optical input jack
  4. COAXIAL IMPUT
  5. AMALOG RCA output jack
  6. POWER(DC power cann’t beyond 12V)

Operation steps

  1. Make sure the VOL turnto the minimum.
  2. Connect the external back-end equipment to the output interface of sound source.
  3. Connect the sound source that needs to be used.
  4. To select bluetooth mode, you need to switch the input channel to bluetooth mode for pairing connection.
  5. Connect to power.
  6. short press switch, again short press select input channel, long press switch it off.
  7. signal (coaxial/optional/pc-usb/bluetooth).
  8. Turn the VOL button clockwise to select the desired volume.
  9. The RCA analog output will automatically disconnect when connected to the headset output, such as the headset.
  10. After use, press and hold for 3 seconds to shut down.

PC driver installation method

ASIO Driver installation:
Double click on the ASIOProxyInstall-0.6.5, Then follow the prompts to install.
Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 4
Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 5
Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 6

The sycon driver installation:
Double click on the SUCA_UsbAudio_v4.80.0_2019-12-09_setup, Then follow the prompts to install.
Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 7
Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 8
Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 9
Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 10

After installation, open the driver and the following dialog box appears.
Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 11

Foobar The installation:
folder Foobar It is free of installation, Double click open foobar2000
Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 12

After open the foobar200, click Top left File, choose Prefereces, Click Components, Click again Install.
Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 13

Select the following three files, Click again open

Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 14

At the same time selectedfoo_input_sacd.fb2k-component, foo_out_asio.fb2k-component、WASAPI.fb2k-component Click
open after three files.

Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 15

Click Apply

Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 16

Click OK

Open foobar2000, Click Library choose Configuer Click again output.

Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 17
Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 18
Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 19

PC-USB Operation Instructinos

  1. Connect the PC-USB interface of the rear surface of the machine with factory provided USB cable (USB can support hot plug).
  2. Press the input signal selection switch to select USB input.
  3. The following photo shows the icon with horn symbol in the lower right corner of PC.
    Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 20
  4. Right click to pop up the dialog box and click .
  5. Select the playback device recognized by PC in the pop-up dialog box(XMOS…).
  6. Click to confirm the identified digital output.
    OLED Show:
    Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual  & troubleshooting 21

A………Input channel display area, display separately according to selection USB/BT/ Coaxial /Optical
B………Input sampling rate display area, no signal displayed
C………Volume display area,Volume 0-99
D………The bottom is the volume progress bar

With bluetooth version Specification

PC-USB Input Sampling Frequency PCM 384K/32Bit DSD256
Coaxial Input Sampling Frequency PCM 384K/32Bit
Optical Input Sampling Frequency 192K/24Bit
PC-USB System Supported W7/W8/W10/MAC/linux
Headphone Maxpower Output 1000mW 32Ω load
Headphone Matching Impedance 16-600Ω
Working Voltage DC12V
RCA Output Voltage 2V
Bluetooth Core 5.0
Bluetooth Support APT-X HD APT-X LL
Frequency Range 10Hz-40kHz(±0.5dB)
THD 0.001%
SNR ≥112dB
Product Dimension ≥112dB
Product Weight 0.52kg
Package Dimension L300*W230*H70mm

Frequently Asked Questions

1: All the cables are connected, but no sound output?

  • Check whether the display screen is bright or not. If the display screen is still not bright after starting up, you can find an output of the same voltage (must be 12V) in the test to determine the machine failure or power failure.If the display screen is bright, check whether the corresponding input signal is correctly selected.
  • If the indicator light is on, check whether the VOL knob is in the minimum position. If so, turn clockwise to normal Volume
  • If both of the above are normal, check the input device if it is paused, mute, or the volume is minimized.

2: Why does the sound is cracking ?

This product is for the DAC decoder, but also can be used as preamp, If post equipment is max volume & preamp too, it’s easy to distortion, you just need to turn down the volume of the equipment, then ok.

3: Why do loudspeakers make a lot of electric noise?
if you are not using the original factory standard power supply, please replace the power supply before testing.Many power supply in the market have large interference coefficient, which will cause a lot of current sound.

4: Why the speaker has drone when I just plug in the input cable but don’t connect the sound sources?
If you use unshielded signal lines, there will be interference signals entering the power amplifier. If you hate the sound, you are advised to use the shielded signal lines or unplug the signal lines.

5: Can the 6.35mm headphone output port connect to the microphone?
no, the headphone interface is the signal output interface, not the input interface.

6: Why does the volume of the machine stay the same, while the sound of different audio sources (such as CDS and mobile phones) is different?
The output range of different types of audio source devices is different, the mobile phone is usually 0.35mV, and the CD is 1V.The signal output amplitude of the sound source will directly influence the volume.

7: Why there is no sound when PC-USB connects to PC?
First press the PC-USB operation to confirm whether the digital playback output has been selected. If still no sound, you can restart the computer and repeat the operation again.

8: Why is it that all my wires are plugged in, but the RCA analog output is silent?
At this point, you should check to see if the headphone output is plugged into the headphone or headphone adapter.If so, you should unplug the headset or headphone converter to simulate RCA output.

9: Why can’t I find the bluetooth pairing name
the machine is designed to be energy efficient and environmental friendly. To use bluetooth, you must switch to bluetooth input mode to search for pairing.

10: Why not support DSD files and the sound is salsa?
playing DSD file does not support PC tuning volume, only the default maximum volume.

11: Does a driver need to be installed on a MAC?
no, the MAC system is driveless and can be used directly.

12: I used to have a load driver. Do I need to uninstall it before I install it?
yes, be sure to install the original driver after unloading.

Warning

  1. Please do not open the shell without permission. Improper operation may cause the danger of electric shock.
  2. Please use the power supply of the regular manufacturer, otherwise it will damage the machine.
  3. Please do not use the machine in a high temperature and humidity environment.

FAQ


Setting up Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual

All symbols, colors and codes for Fosi Audio DAC-Q6 Bluetooth Headphone Amplifier Sterep Audio Amp User Manual are explained in this instruction manual. You can find everything you need and moree