FOXWELL NT301 Code Reader User Guide

FOXWELL NT301 Code Reader User Guide & troubleshooting

FOXWELL NT301 Code Reader User Guide

FOXWELL NT301 Code Reader User Guide  & troubleshooting 3

NT301 Code reader FOXWELL NT301 Code Reader User Guide  & troubleshooting 4

The NT301 CAN OBDIUEOBD Code Reader from Foxwell is the easiest and quickest solution for OBD faults. When it comes to diagnosing Check Engine issues you’d never go wrong with the new NT30l code reader. It offers such useful information for entry-level pro and savvy DI Yer that they  can quickly and efficiently troubleshoot OBD2/EOBD problems on today’s vehicles. In addition, it’s 2.8″ TFT  color screen and hot keys for 1/M readiness test, and reading/clearing DTCs make it excellent value for money.

Applicable Functions

  • Read Codes / Freeze Frame Data
  • On-board Monitor Test /Component Test
  • Erase Codes /Live Data Vehicle
  • Information Modules Present
  • I/M Readiness /02 Sensor Test
  • Unit or measure /DTC GUIDE

Code Reader Descriptions

FOXWELL NT301 Code Reader User Guide  & troubleshooting 5
A.OBD II Cable
B. LCD Display
C. Green LED Display – indicates the engine system is PID list, and to view Pill graphs. working normally (all monitors on the vehicles are active C)UGHT SCROLL KEY – goes to next character when and performing their diagnostic testing), and no DTCs looking up DTCs. Scrolls back and forth through codes are found.
D. Yellow LED Display -shows the tool finds a possible problem. Pending DTCs exist or/and some of the vehicle’s emission monitors have not run their diagnostic testing.
E.Red LED Display – indicates there are some problems in one or more of the vehicle’s systems. In this case, the MIL lamp on the instrument panel is on.
F.  UP Key
G.DOWN Key
H. LEFT SCROLL KEY – goes to previous character when looking up DTCs. Scrolls back and forth through codes found and through different screens of data.. Also it is used to make selection of P!Ds when viewing custom PID list, and to view PID graphs
I. RIGHT SCROLL KEY – goes to next character when  looking up DTCs. Scrolls back and forth through codes found and through different   screens of data. Also it is used to cancel all selections of PIDs when viewing custom PID list.
J.  One Click 1/M Readiness Key – quick checks state emissions readiness and drive cycle verification
K. BACK Key
L. ENTER Key
M. Power Switch – reboot the code reader
N.HELP Key – accesses to the Help function and it is also used to update the code reader when long pressed.
O. USB Port

How to Use NT301?

FOXWELL NT301 Code Reader User Guide  & troubleshooting 6

OBD-II Connector and Pinout

  1. VendorOption
  2. 2.SAE J1850BUS+
  3. Vendor Option
  4. Chassis Ground
  5. Signal Ground
  6. CAN(J-2234)High
  7. ISO9141-2K-Line
  8. VendorOption
  9. VendorOption
  10. SAE J1850BUS-
  11. Vendor Option
  12. Vendor Option
  13. VendorOption
  14. CAN(J-2234) Low
  15. 15.ISO9141-2 Low
  16. Battery Power
I Tum on the ignition of your car

FOXWELL NT301 Code Reader User Guide  & troubleshooting 7

In the main menu, ENTER OBDII/EOBD, then NT301 starts scanning, wait for several seconds, choose “yes/no” with right arrow key, and enter the Diagnostic Menu .

FOXWELL NT301 Code Reader User Guide  & troubleshooting 8

Choose “Read Codes” – Choose each selection to check. Pending Codes means the codes need to be confirmed after several driving cycle.

FOXWELL NT301 Code Reader User Guide  & troubleshooting 9

If the code with “FOXWELL NT301 Code Reader User Guide  & troubleshooting 10” symbol, please press HELP To get DTC guide for possible car issues. If not, take photos of each codes you have or write them down. Google them and find more references on Internet to help to locate your car issues.

FOXWELL NT301 Code Reader User Guide  & troubleshooting 11

Enter “Live Data”, graphing selected live data will also help locate bad sensors

FOXWELL NT301 Code Reader User Guide  & troubleshooting 12

Enter “View Freeze Frame”, which is a snapshot of critical vehicle operating conditions automatically recorded by the on-board computer at the time DTC( Diagnostic Trouble Code) set. Check the data which you need to locate bad sensors

FOXWELL NT301 Code Reader User Guide  & troubleshooting 13

O2 Monitor Test, On-Board Monitor Test, Component  Test, the availability of these tests may depend on the actual condition of your vehicle.

FOXWELL NT301 Code Reader User Guide  & troubleshooting 14

Enter” I/M Readiness”.

Retrieve 1/M

FOXWELL NT301 Code Reader User Guide  & troubleshooting 15 Malfunction Indicator Lamp
FOXWELL NT301 Code Reader User Guide  & troubleshooting 16 Diagnostic Trouble Codes
FOXWELL NT301 Code Reader User Guide  & troubleshooting 17 Misfire
FOXWELL NT301 Code Reader User Guide  & troubleshooting 18 Fuel System
FOXWELL NT301 Code Reader User Guide  & troubleshooting 19

 

Comprehensive Component Monitor
FOXWELL NT301 Code Reader User Guide  & troubleshooting 20 Catalyst
FOXWELL NT301 Code Reader User Guide  & troubleshooting 21 Heated Catalyst
FOXWELL NT301 Code Reader User Guide  & troubleshooting 22 Ignition
FOXWELL NT301 Code Reader User Guide  & troubleshooting 23 Pending Diagnostic Trouble Codes
FOXWELL NT301 Code Reader User Guide  & troubleshooting 24 Evaporative System
FOXWELL NT301 Code Reader User Guide  & troubleshooting 25 Intake Air System
FOXWELL NT301 Code Reader User Guide  & troubleshooting 26 Oxygen Sensor
FOXWELL NT301 Code Reader User Guide  & troubleshooting 27 Oxygen sensor heater
FOXWELL NT301 Code Reader User Guide  & troubleshooting 28 Exhaust Gas Recirculation

Updating

FOXWELL NT301 Code Reader User Guide  & troubleshooting 29

  • Do not disconnected the code reader Iran computer a- power off the computer during the process of updating
  • No Registration
  • Required PC: Windows 7 Windows 8 and Windows 10 supported
  1. Download the update tool NT Wonder and install it.
  2. Enable NT Wonder and connect NT301 to computer with USB Cable.
  3. Click or to start updating according to the software version conditions.
  4. An Update Finished Message displays when the update is completed.

[email protected]Please download the User Manual for more detailed operations

FOXWELL NT301 Code Reader User Guide  & troubleshooting 30

DTC Trouble Code Search

OBD-II search powered by dot.report

References

FAQ


Setting up FOXWELL NT301 Code Reader User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using FOXWELL NT301 Code Reader User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is FOXWELL NT301 Code Reader User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for FOXWELL NT301 Code Reader User Guide

All symbols, colors and codes for FOXWELL NT301 Code Reader User Guide are explained in this instruction manual. You can find everything you need and moree