Gateway GWTC116-2Y Portable Laptop User Guide

Gateway GWTC116-2Y Portable Laptop User Guide & troubleshooting

Gateway GWTC116-2Y Portable Laptop User Guide  & troubleshooting 1GWTC116-2Y Portable Laptop
User Guide

Start Here

  1. Plug Power Adapter Into Wall OutletGateway GWTC116-2Y Portable Laptop User Guide  & troubleshooting 2
  2. Plug Power Adapter Into LaptopGateway GWTC116-2Y Portable Laptop User Guide  & troubleshooting 3
  3. Press and hold the Power ButtonGateway GWTC116-2Y Portable Laptop User Guide  & troubleshooting 4
  4. Follow the on-screen Windows prompts to finish setting up

Exterior FeaturesGateway GWTC116-2Y Portable Laptop User Guide  & troubleshooting 5Gateway GWTC116-2Y Portable Laptop User Guide  & troubleshooting 6

  1. Charging Port
  2. USB 3.0
  3. Mini HDMI
  4. Camera
  5. Headphone Port
  6. USB 2.0
  7. Micro SD Slot
  8. Power Button

What’s in the box

  1. Laptop
  2.  Power Adapter
  3.  Warranty Book
  4. Quick Start Guide

Caution: The AC adapter included with your PC was specifically designed and approved for your model. Utilization of an after-market adapter may damage either the notebook or other devices connected to it. If damage is determined to have been caused by the utilization of an unauthorized power supply, it will not be protected under warranty. For our FAQ, please visit www.gatewayusa.com/support.html. Gateway and the Gateway logo are the registered trademarks of Acer Inc. and are used under license from Acer America Corporation. www.gatewayusa.com I Customer Service: (877) 777-0649

Charging the Notebook

Please charge your Notebook fully before using it for the first time. Connect the DC plug on the supplied power adapter to the charging socket (DC IN) on the Notebook. Then plug the power adapter into a socket. The charging LED lights up while the device is charging. Only leave the power adapter connected to the socket until the battery of the Notebook is fully charged. In addition, always disconnect the power adapter from the Notebook when you are not charging the Notebook.
Turning on the Notebook for the first time
Bring the screen upwards until it is standing at a minimum angle of 90° to the keyboard. Press the on/off switch for about 5 seconds to switch on the Notebook. The setup assistant will then appear on the screen. Follow the setup assistant instructions to set up your Notebook. During the start-up, the wizard prompts you to register for your Microsoft account. If you do not yet have a Microsoft account, please set one up here After completion of the start-up, your Notebook is configured This may take several minutes to complete. Do not turn the Notebook off during this time!
Unlocking the display
As soon as the device has been set up (and every time it is subsequently switched on and booted up), the lock screen appears, press any key on the keyboard to unlock the screen. If your Notebook is password-protected, you must then enter the password. Alternatively, you can also log into your Notebook via Windows Hello. To activate and set up this feature, select “Settings” “Accounts” “Sign-in options” “Windows Hello”.
Start menu
To display the start menu, click the Windows icon in the bottom left of the display or press the Windows button on the keyboard. Press the icon a second time to hide the Start menu. The Start menu consists of the classic navigation list (A) and a useful app area (B) to the right of the navigation list. Among other things, the navigation list includes a link to open Settings (cogwheel icon).In the app area, you can pin apps and favorites in the form of live tiles and organize them. In the navigation list (A) you find a list of all installed apps in alphabetical order. Alphabetic quick access to the navigation list appears when you click on a respective first letter.
The Action Center
The Info Center is a bar with quick links to some important Notebook functions, which you can either display or hide. To access the Info Center click the memo symbol in the bottom right-hand corner.
Activating WIFI and opening the browser
a. Call up Settings(see “Start menu”).
b In the settings, click “Network & Internet”.
c Click ” Wi-Fi” on the left in the next screen.
d Click the slider or the word “Off”. The word “On” now appears next to the slider. The Notebook searches for all available wireless networks nearby and then displays them as a list (“show available networks”).
e Click the network that you wish to connect to.
f Enter the network key (password) if necessary.
g . Click “Connect”. The Notebook connects to the selected network.
The button for launching the Internet browser can be found on the taskbar at the bottom of the display. Click the little blue “e” to launch the browser. To enter an Internet address (URL), click the search bar displayed centrally at the top of the window.
Reset
If the Notebook “freezes” and no longer responds, you can reset it. Please and hold down then on/off switches off. Wait for about 20 seconds and then turn the Notebook on normally. Any files that have not been saved will be lost when the Notebook is reset. Switching off the Notebook
Standby
Briefly presses the on/off switch on the device to activate the standby mode. Press it again quickly to take the Notebook out of standby mode.
Shutting down
Open the Start menu. Click”” in the bottom area of the Start menu and then tap “Shut down”. The Notebook shuts down.
Saving energy
Deactivate the WIFI function when it is not in use. Only leave the power adapter connected to the socket until the Notebook’s battery is fully charged. In addition, always disconnect the power adapter from the Notebook when you are not charging the Notebook. Reduce the display brightness under “System””Display” in the settings. Activate standby mode or turn off the Notebook completely if you are not using the Notebook.
General safety information
WARNING Risk of multiple injuries due to reduced physical, sensory or mental capabilities and/or lack of knowledge or practical experience
Children and vulnerable individuals may only use the device under direct supervision.
Risk of electric shock or electrocution from live components
Do not insert objects into the device’s ventilation slots.
Do not open the power adapter.
Do not touch the power adapter if you hands are wet.
Do not short out the device and/or charger.
Fire hazard and or risk of burns from damaged or leaking batteries
Do not use or charge the device if the battery if damaged or leaking.
Do not use or charge the device if the battery is damaged or leaking.
Avoid skin contact with the device and/or battery if the battery is leaking.
Wear protective gloves if it is not possible to avoid touching the device/battery in such cases.
Immediately wash your hands thoroughly in the event of skin contact with the battery substrate.
If the battery substrate comes into contact with your eyes, rinse them out with plenty of water and consult a physician immediately.
Risk of fire or explosion when using non-approved chargers and power adapters
Only use the included power adapter or on an equivalent power adapter to charge the battery.
If the power adapter is defective, only exchange it for an equivalent power adapter.
Please note the information in the technical specifications of the power adapter in the online user’s manual or contact customer service.
Risk of multiple injuries from slipping, tripping or falling
Do not expose the device and/or power adapter to vibrations and/or any form of impact. Do not drop the device and/or power adapter. Do not use the device/power adapter if it has been dropped and/or is damaged. Have a qualified service technician check the device/power adapter before restarting it. Always ensure that the power cord is installed securely. Do not allow the power cord to knot or kink.
Notes and practical tips on maintenance and repairs
WARNING
Risk of electric shock and electrocution from live components
Never open the casing of the device and/or the power adapter. No parts inside the device require maintenance or cleaning. The battery in the device should not be removed by the user. Do not disassemble the battery, place objects into it or handle liquids near it. The battery could catch fire or explode. It is prohibited to repair or modify the device and/or power adapter. Failure to comply with these instructions may void the warranty. The device should only be serviced and repaired by a qualified service technician. Contact customer service where repairs or servicing are required.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
– This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. The device has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the handset kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.

Updating Windows 10

  1. In the,O search box on the taskbar, enter Windows Update and press enter or select the:: Start button, and then go to o Settings > 0 Update & Security > Windows Update.
  2. Click on “Check for Updates”.
  3. Your computer will start downloading and installing updates
  4. Wait until all the updates have installed.
  5. Click the “Restart Now” button.
    www.gatewayusa.com
    Customer Service: (877) 777-0649

FAQ


Setting up Gateway GWTC116-2Y Portable Laptop User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Gateway GWTC116-2Y Portable Laptop User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Gateway GWTC116-2Y Portable Laptop User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Gateway GWTC116-2Y Portable Laptop User Guide

All symbols, colors and codes for Gateway GWTC116-2Y Portable Laptop User Guide are explained in this instruction manual. You can find everything you need and moree