GIANT RECON E HL150 STVZO Light User Guide

GIANT RECON E HL150 STVZO Light User Guide & troubleshooting

GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 1

RECON E HL150 STVZO

GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 2

HIGH BEAM: 800 LUMEN, LOW BEAM: 400 LUMEN, DRL: 100 LUMEN

GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 3GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 4 LINK TO ALL VIDEO TUTORIALS: www.giant-bicycles.com/global/recon-e-lights

GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 5 WARNING

  • Do not look directly into the light beam or shine it directly into the eyes of other people.
  • Do not touch the light case or LED when the light is on as they can become very hot.
  • Keep light out of reach of children.
  • RECON E HL LED lights to have a water resistance rating of IPX6 under regular daily use and are not designed to be submerged in water. Submerging RECON E HL LED lights underwater will damage the light and void the warranty.
  • Do not attempt to disassemble or repair the light; doing so will void the
  • Be sure to direct the light beam downward to avoid blinding oncoming pedestrians or drivers.
  • Do not use high mode on public roads.
  • Before your ride, please make sure the light is firmly mounted to the bracket, that it functions correctly and is not blocked by baggage, etc.
  • In case of unexpected light shutoff or battery issues, carrying a spare light is recommended.
  • If the light, light case or accessories become dirty with mud or dust, clean them with a soft cloth moistened with mild soap. Never use alcohol, benzene or solvents, doing so will result in damage and void the warranty.
  • Giant Bicycles Inc. does not accept any liability for injuries or other damages resulting from the improper use or improper installation of this product under any circumstance.

INTRO

  • To ensure proper use and care of your new RECON E HL LED lights, PLEASE READ ENTIRE MANUAL BEFORE INSTALLATION AND OPERATION.
  • Traffic laws mandating bicycle lights vary from country to country. Please make sure you are following the appropriate bicycle light laws and regulations in your country of use.
  • RECON E HL LED lights can be controlled via the onboard electronics of your E-bike system and are only to be mounted on E-bikes with DC voltage that have their own battery charge indication and control. The E-bike system must also be capable of automatically shutting the light off when the onboard battery reaches critical voltage to avoid deep battery discharge.
  • RECON E HL LED lights are powered by the motor of your E-bike and need to be manually installed. Depending on the make and model/battery type, correct installation may require some disassembly of the bike and motor and additional wiring to connect the light to the motor. Please follow the appropriate Giant How-To video for correct installation on your model/battery type or contact the e-bike or motor manufacturer for installation instructions.

GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 6 NOTE
Incorrect disassembly, installation, or assembly may void the warranty of your e-bike and/or light. It is highly recommended that a trained E-bike technician install your lights.

ALIGNING THE RECON E HL BEAM

  1. Place the bike 2.5 m away from a wall and face your bike to the wall.
  2. Turn on the RECON E HL and put it in high-beam mode
  3. Make sure it is parallel to the ground
  4. Mark the cut-off line of the beam on the wall, where the beam ends above and is brighter below
  5. Measure and mark 7 cm below the cut off line above
  6. Adjust the RECON E HL so that the height of the beam matches the new, lower cut offline.

GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 7

GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 8NOTE Make sure to follow the steps above to achieve a glare-free beam that is compliant with German road law.

GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 9

INSTALLATION

Before your ride, please make sure the light is firmly mounted to the bracket at a height of 70 cm to 120 cm, that it functions correctly and is not blocked by baggage, etc.GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 10

  • Fits 31.8 or 35 mm round handlebars
  • Works with all Recon E Lights.
  • The clamp of one side holder can be opened for easy installation
  • Can be installed on either left or right side of the stem

GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 11GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 12

OPERATION

The Remote Switch toggles between Auto Mode and Manual Mode(high beam /low beam).GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 13GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 14 NOTE
Only RECON E HL 1000 and RECON E HL 150 StVZO work with remote controls for switching lighting modes.GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 15

CONNECTION

GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 16

GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 17 Link To Video Tutorials: www.giant-bicycles.com/global/recon-e-lights

GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 18

GIANT RECON E HL150 STVZO Light User Guide  & troubleshooting 19 NOTE
Giant / Yamaha motor cable included. Cables for non-Yamaha motors are not included and must be purchased separately. Contact your authorized Giant retailer for more information.

TECHNICAL DATA

Low Beam  800 Lumen, 150LUX
Wattage 9 W
Input Voltage 6-48V DC
Illuminant 1 LED,26 LED chips
Power Cable Length 60 cm

MOTOR COMPATIBILITY

Bosch (6V) / Bosch (12V)
Shimano E5000, E7000, E6001, E6110, E9000
Shimano E6000,E6001,E6010,E6050
Shimano E8000, E8080, E6002,  E6012
Yamaha PWse / Yamaha PW
Brose Drive S (2018)

WARRANTY

  • In U.S.A. and U.K., RECON E HL LED Lights to carry a two (2) year warranty to the original owner from the original purchase date (proof of purchase required).
  • RECON E HL warranties cover all manufacturing defects in materials or workmanship.
  • For all warranty issues worldwide, please contact an authorized Giant retailer and present proof of purchase.
  • If an LED is not working correctly or not working at all, do not use your light anymore. The light will need to be replaced immediately.
  • Normal wear and tear or damage arising from improper installation, attempting to access or modify electronics, accidents, misuse, abuse, and/or neglect are not covered by the warranty.

FAQ


Setting up GIANT RECON E HL150 STVZO Light User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using GIANT RECON E HL150 STVZO Light User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is GIANT RECON E HL150 STVZO Light User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for GIANT RECON E HL150 STVZO Light User Guide

All symbols, colors and codes for GIANT RECON E HL150 STVZO Light User Guide are explained in this instruction manual. You can find everything you need and moree