GLOBAL INDUSTRIAL 412597 Digital Crane Scale With Remote User Manual

Contents hide

1 GLOBAL INDUSTRIAL 412597 Digital Crane Scale With Remote

2 Instruction

3 Battery instructions

4 Operation Instructions

5 Advanced operation

6 Accumulation function

7 Troubleshooting Display Codes

8 Documents / Resources

GLOBAL INDUSTRIAL 412597 Digital Crane Scale With Remote

Instruction

Technical parameter

Accuracy class II
Tare range 100% max. capacity
Initial zero range +10% max. capacity
Manually zero range +2% max. capacity
Operation temperature& humidity 14-104°F: s90%Relative Humidity (RH)
Storage temperature 40-158°F

Battery instructions

The crane scale uses a 6v/4.5Ah rechargeable battery and lasts for about 80-150 hours. The battery charging port and battery indicator are on the back of the crane scale. The scale fully charges within 8-12 hours. The battery indicator turns from yellow to green when fully charged.

Referenced dimensions

Model No.

Product Description

Maximum

Capacity (lbs.)

Division (lbs./kgs)

Size LxWxH (inches)

Weight

412604

LED Digital Crane Scale With Remote

500lb x 0.2lb

550

0.2/0.

8.5”x 5.75”x15.16”

10.14

412597

LED Digital Crane Scale With Remote

1,000 lb x 0.2 lb

1100

0.2/0.1

8.5”x 5.75”x15.16”

10.14

412598

LED Digital Crane

Scale With Remote 3,000lb x 1lb

3300

8.5”x 5.75”x17.13”

15.43

412605

LCD Digital Crane

Scale with Remote, 3,000 lb x 1 lb

3300

8.5”x 5.75”x17.13”

15.43

Operation Instructions

Power on
Press the power button for 1 second.
Power off
Press the power button. The scale will turn off automatically if not used for 30 minutes.
Zero
Press the zero button to zero the scale.
Tare
Press the tare button to enter the net weight mode. The new net weight will display as zero. Press the tare button again to return to the gross weight mod and display the gross weight.
Hold
Press the hold button to keep the current weight on the display. Press the hold button again to stop holding the weight on the display. If an object is blocking the display while it is weighed, this function can help you view the object’s weight after it’s removed.

Advanced operation

2nd Mode

Some buttons have a 2nd function. Press the 2nd button then press a different button to use its 2nd function. [2nd] will be displayed on the screen when the 2nd button is activated. Press the power button to exit.

Accumulation function

Load a weight on the scale until it is stable. Press the accumulation button to add the current weight to an accumulative total. The display will read [ ACC ]. If the max weight has been reached, no more weight measurements can be added and the display will read [noACC]. Press the delete button to remove the last added weight from the accumulated total. The display will read [DEL] when the last weight was removed If there is no weight to remove, the display will read [noDEL]. Press to see the number of weights added to the accumulated total displayed as [n*** ]. Then the total accumulated weight will be shown for 3 seconds before returning to the weighing screen. Press the [2nd] button then the delete button to clear all the accumulation data. The display will read [CLEAR] to conﬁrm all the weights were deleted.

Weight display

Press to save the current weight value. [STORE] will be displayed when the weight is saved. Press to see the last weird saved, [LAST0]. Press or to look through the other saved weights. The most recent weight saves as 0 and the ﬁrst weight saved as 9. Press to display the corresponding weight for 2 seconds. The display will return back to weighing mode.

Switching between lbs./kg

Press the [2nd] button then press to covert the weight unit between lbs. and kg.

Preset tare weight

Press the [2nd] button then press. The display will read [00000]. Use these keys to input a tare weight value. Then press to conﬁrm the input value. The crane scale will enter the net weight mode.

Parameter setting

Press the [2nd] button then press to adjust the following settings: adjust division, delay automatic off, delay idle, ﬁlter intensity, display brightness, zero range, stable intensity, hold mode, warning tone, kg/lb conversion. After each operation, press to conﬁrm. Press to exit.

Content	Display	Parameter instruction	Default value
Display division	E	0.02 = 0.02kg/lb 0.05 = 0.05kg/lb 0.1 = 0.1kg/lb 0.2 = 0.2kg/lb 0.5 = 0.5kg/lb 1 = 1kg/lb 2 = 2kg/lb	1
Automatic power off	OFF	00 = close this function 10 = 10 minutes delay 30 = 30 minutes delay 60 = 60 minutes delay 90 = 90 minutes delay	10
Idle mode 1]	IDL	00 = close this function 10 = 10 minutes delay 30 = 30 minutes delay 60 = 60 minutes delay 90 = 90 minutes delay	30
Kg/lb conversion	UNS	0 = kg/lb conversion off 1= kg/lb conversion on	1

Content	Display	Parameter instruction	Default value
Hold mode	HOLD	0 =close hold function 1 =Peak hold 2 =Data Hold 3 =Auto Hold 4 =Animal scale function	2
Zero range	ZERO	0=close manually zero setting and Initial zero range 1=Initial zero range±10% manually zero range±2% 2= Initial zero range 100% manually zero range 100%	1
Filter intensity	FIL	0=close the function 1=weak 2=moderate 3=strong	2
Stable intensity	STB	0=weak 1=moderate 2=strong	1
Warning tone	BEEP	0 close warning tone 1 open warning tone	1
Display brightness	LEDb	1=light 2= moderate 3=dark	1
Zero track speed	ZTS	0= no zero tracking 1=±0.5d/s 2=±1d/s 3=±2d/s 4=±5d/s	1

Battery power level checking

Press the [2nd] button then press to see the battery power level displayed in this format [U 6.**]. The display returns to weighing mode after 2 seconds.

Internal code checking

Press the [2nd] button then press to display the internal code for Maintenance and debugging. Press the [2nd] button then press to return to the weighing mode.

Display Codes	Explanations
U 6.28	Battery power remaining.
oFF	Power off.
ACC	Weight added to accumulated total.
noACC	No more weights can be added to the accumulated total.
dEL	Clear the last accumulation value data.
nodEL	Cannot be cleared.
CLEAr	Clear all the accumulation data.
StorE	Save the display value data.
LASt0	See the last weight added to the accumulated total

Troubleshooting Display Codes

Display Codes	Cause	Solution
Err6	Exceed zero range.	Ensure the crane is not moving and press the zero button.
uuuuuu	Overload.	Reduce the weight.
nnnnnn	Weight measured is lower than the minimum value or the scale is moving.	Ensure the scale is not moving.
2nd	2nd button pressed.	First press the 2nd button then press another button to use its 2nd function. Press the power button to cancel. Press the 2nd button twice to enter the calibration mode.