Haier Vented Clothes Dryer HDV70E1 Instruction Manual

Haier Vented Clothes Dryer HDV70E1 Instruction Manual & troubleshooting

Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 1

INSTALLATION INSTRUCTIONS
USER GUIDEHaier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 2

Vented clothes dryer
Model: HDV70E1

IMPORTANT!
SAVE THESE INSTRUCTIONS
Please read these instructions carefully before using your tumble dryer.
The instructions contain important information which will help you get the best out of the device and ensure safe and proper installation, use, and maintenance.

SAFETY AND WARNINGS

Meaning of symbols on the dryer

Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 3Warning: Risk of fire/Flammable materials
Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 4Read the instructions

Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 5WARNING!

Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 6 Fire Hazard

  • Only dry fabrics that have been washed with water.
  • Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials, dry on ‘Airing’.
  • Do not stop a tumble clothes dryer before the end of the drying unless all items are removed and spread out, in order to dissipate the heat.
  • A clothes dryer produces combustible lint; the lint filter must be cleaned before each drying cycle.
  • Failure to follow the warnings outlined in these user instructions can cause a fire hazard.
  • Failure to follow these instructions can result in death or personal injury.

IMPORTANT SAFETY INSTRUCTIONS
WARNING! When using this appliance always exercise basic safety precautions including the following:
Dryer use

  • The tumble dryer is intended only for drying textile material washed in water.
  • Undergarments that contain metal reinforcements should not be placed in the dryer.
    Damage to the dryer can result if the metal reinforcements come loose during drying.
    If you wish to dry these items use a drying rack or place them in a garment bag.
  • Check and remove all objects from pockets, eg lighters, and matches.
  • Never dry rubber articles, or any plastic items or film, eg plastic lined tablecloths and baby bibs.
  • Clothes should go through the cool down/airing phase in the final part of the cycle.
    This ensures items are left at a temperature where they will not be damaged. If for any reason the dryer is stopped before the cycle has finished, dry clothes should be removed immediately and not left in the dryer. Clothes should be quickly spread out flat to cool so heat can dissipate, not left bunched up, eg in a clothes basket.
  • This dryer has been designed for domestic use only, not for commercial applications, such as massage/beauty clinics where there may be increased lint accumulation or flammable materials in the atmosphere or load.
  • Do not operate this product without the lint filter in place or allow lint to accumul in or around the dryer.
  • This dryer is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless given supervision or instruction concerning the use of the dryer by a person responsible for their safety.
  • Children should be supervised to ensure they do not play with the dryer.
  • Unplug the machine from the power supply when it is not in use.
  • Do not swing on or put weight on the door.
  • Your dryer is designed to stop operating in the event of a power outage. When power is resumed, the machine will remain off until the ‘Power’ button is pressed. To restart the dryer, press ‘Power’, select your drying cycle, and press ‘Start / Pause’.
  • Never attempt to repair the dryer yourself.
  • The only user-removable parts of the dryer are the lint filter. No other parts are designed to be removed by anyone other than a Haier Repairer.
  • For problems that cannot be solved from the information in this User Guide, turn off and unplug your dryer and contact a Haier Repairer.
  • When disposing of the dryer, it is recommended that the door is removed to avoid children getting trapped inside, and that the electrical cable is cut off close to the dryer.

IMPORTANT!
We do not recommend the use of extension cords or portable electrical outlet devices for safety reasons.
Lint

  • Accumulated lint in the dryer can become a fire hazard; it also reduces the efficiency of the dryer by causing longer drying times and increased power consumption.
  • Clean the lint filter before every load.
  • Ensure the area around the dryer is clear of lint.
  • At regular intervals have the interior of the dryer cleaned of any accumulated lint.
    This must be done by a Haier-trained and supported service technician.
    This must be done when the dryer installation is changed from free-standing or inverted, or vice versa.
  • The dryer exhaust ducting should be inspected and cleaned periodically to remove accumulated lint.

Spontaneous combustion

IMPORTANT!
To reduce the risk of fire in a tumble dryer the following should be observed:

  • Items that have been spotted or soaked with vegetable oil or cooking oil are a fire hazard and should not be placed in a tumble dryer.
  • Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as a tumble dryer. The items become warm causing an oxidation reaction in the oil. This oxidation creates heat. If the heat cannot escape the items
    can become hot enough to catch fire. Piling, stacking, or storing oil-affected items can prevent heat from escaping creating a fire hazard.
  • If it is unavoidable that fabrics that contain vegetable oil, cooking oil, or have been contaminated by hair care products be placed in a tumble dryer, they should first be washed in hot water with extra detergent – this will reduce, but not eliminate
    the fire hazard. The cool-down cycle of the dryer should be used to reduce the temperature of these items. They should not be removed from the tumble dryer and piled or stacked while hot.
  • Items that have previously been cleaned in, washed in, soaked in, or spotted with flammable liquids or solids, eg petrol/gasoline, kerosene, dry-cleaning solvents, vegetable or cooking oil, acetone, denatured alcohol, some brands of spot removers, turpentine, waxes, and wax removers or other flammable or explosive substances should not be placed in a tumble dryer.
  • Do not dry unwashed items in the tumble dryer.
  • The dryer is not to be used if industrial chemicals have been used for cleaning.
  • Fabric Softeners or similar products should not be used in a tumble dryer to eliminate the effects of static electricity unless this practice is specifically recommended by the manufacturer of the fabric softener product.
  • Rubber-backed articles, foam rubber (latex foam), clothes or pillows fitted with foam rubber pads, fiberglass, shoes containing rubber, shower caps, baby’s waterproof napkin covers, and waterproof textiles should not be dried in the dryer.
    These materials can, when heated, produce fire by spontaneous combustion.
  • The maximum mass of dry textiles depends on your model, The HDV70E1 model is rated at 7kg. Do not overload your dryer

INSTALLATION INSTRUCTIONS

Please read and follow the ‘Safety and warnings’ and ‘Installation instructions’ sections carefully before using your dryer.
Unpacking

  1. Remove all the packaging.
  2. Tilt the dryer backward and ‘walk’ it off the base one foot at a time.
  3. Remove all packaging and accessories from inside the drum and ensure you remove protective covers from the door and console.

IMPORTANT!

  • Ensure packaging materials are kept out of reach of children.
  • Please help protect the environment and dispose of the packaging from around the dryer in an environmentally friendly manner.

Accessories
Please check your dryer model and the following accessories inside the drum:
HDV70E1

  • 1 x Installation instructions and user guide
  • 1 x Wall mounting kit
  • 2 x Stacking bracket
  • 1 x Hose connector
  • 1 x Flexible hose
  • 1 x Flexible hose clip
  • 1 x Inverted panel
  • 1 x Warranty card

Location
IMPORTANT!

  • The dryer must be installed in a well-ventilated, dust-free environment.
  • The dryer must not be installed on any textured floor coverings (eg carpet, rugs).
  • Do not install the dryer behind a lockable door, sliding door, or behind a door where the hinge is on the opposite side to that of the dryer in such a way that the full opening of the door is inhibited. Ensure the dryer door can always be opened fully.
  • Do not install the dryer outside, in a damp place, where there is a risk of freezing, where it may be rained on, in direct sunlight or close to a source of heat.
  • Do not place your dryer on top of its power cable.

Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 7

Venting
Correct installation is very important for all dryers to ensure maximum efficiency and safety.

IMPORTANT!
Never run the dryer unless the airflow system is free from obstruction.
There must be adequate ventilation to avoid the backflow of gases into the room from appliances burning fuels, including open fires, when operating the dryer.
Exhaust air must not be discharged into a flue which is used for exhausting fumes from appliances burning gas or other fuels.

External venting
Your dryer has been designed to be vented outside to provide the following advantages:

  • Ensures optimum efficiency by preventing recirculation of moist air.
  • Eliminates condensation on walls and ceilings.
  • Reduces the chance of lint being sucked into the dryer.
  • Prevents lint and other fine particles from being blown into the room.

The external venting system should be:

  • Made from 100mm diameter flexible plastic pipe where the vent system goes through the wall.
  • Exhausted outside and not into another confined space, eg the roof cavity of a house.
  • Angled to avoid condensation and rainwater running back into the dryer.
  • The vent system should be a maximum of two meters with no more than three 90° bends.

Internal venting
The dryer is set up in the factory for front venting. If front venting is used there must be adequate ventilation to avoid the build-up of moisture in the room, which can affect the performance of the dryer. Venting must comply with local by-laws and regulations.

Freestanding
The dryer stands on the floor and can easily be moved into position.

  1. Move the dryer into the desired position. Do not lift the dryer by the top panel.
  2. Have a minimum clearance on all sides of at least 20mm.
  3. Have a minimum clearance at the rear of 75mm. The spacers from the accessory wall mounting kit can be used to set this distance.
  4. Install the dryer on a stable and level floor.

Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 8

IMPORTANT!
Do not put the heavy loads on the top of your dryer, eg the wet clothes that were taken out of the washing machine.
Inverted wall mounting
Your dryer has been designed to be inverted and mounted on the wall above a washer or tub. A wall mounting kit must be used. Inverting allows access to the dryer control panel.

Tools and parts required:

  • Drill and 3mm bit
  • Phillips head screwdriver
    Wall mounting kit includes:
  • 2 x Plastic spacers
  • 2 x Wall hanging brackets
  • 2 x Hanging hooks
  • 4 x Wood screws
  • 6 x Screws for hanging hooks and plastic spacers

Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 9

Mounting dryer on wall

  1. Determine the position of the dryer on the wall and mark the bracket position. A minimum of 50mm is needed between the top of the dryer and the ceiling for ease of installation. If mounting above a washing machine, allow sufficient room to open
    the lid of the washer.
  2. Fix the wall hanging brackets to the wall securely, ie into the stud. If the studs are too far apart, fit a timber slat to the studs and then mount the brackets to the slat. If a slat is used install a second slat behind the spacers to ensure the dryer is horizontal. The distance between the centre of each bracket is 555mm (A).
  3. To install the hooks onto the dryer, remove one screw from each side (B), reuse these screws with two more (each side) from the kit to fasten the hooks in place.
  4. Remove plastic plugs from the back of the dryer and screw the spacers provided in place (C).
  5. With assistance, mount the dryer on the wall brackets.
  6. The inverted control panel is supplied in the accessories with your dryer. Fit inverted control panel over the existing panel.
  7. Adjust the display to read correctly on an inverted panel:
    ■ Press and hold the ‘Key Lock’ and ‘Option’ buttons for three seconds.
    ■ The dryer will beep to indicate you have made a correct selection, and the display will change after three seconds.
    ■ Repeat the same steps to return the panel to the factory setting.

Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 10

Stacking installation
Your dryer has been designed to be able to be stacked on the top of a Haier front load washing machine, ensure the washing machine is the same width as your dryer.

Tools and parts required:

  • Drill and 2.9mm bit
  • Phillips head screwdriver

The stacking bracket includes:

  • 2 x Stacking bracket
  1. Remove 4 screws at two sides of the bottom panel, then install the stacking bracket.
    Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 11
  2.  Install your dryer with a stacking bracket on the top of the front load washing machine.
    Drill two holes on both sides of the top panel of the washing machine with a 2.9mm diameter drill. Detailed drill position as shown on the stacking bracket. Only use the screws supplied in the stacking bracket. Fix the stacking bracket on the top panel of the washing machine.
  • The models of Haier front load washing machine that can be stacked installation are followed:

HW70-BP12636S
HW80-BP12636S
HW90-BP12636S
HWD-C180
HW70-BP10829
HW80-BP10829
HW80-BD12756
HWD100-BD14756
HW100-BD14756
HW80-B12876
HW100-B14876
HW120-BD14876
HW85-BP12826
HW100-BP12826Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 12

Before a rear venting option is installed the dryer must be changed from the front venting factory setup. Remove the outlet grille from the front left-hand side and replace it with the outlet cover from the rear left-hand side. These covers should be gently pried at the sides to prevent damage.
Internal venting
Front venting is the only option for internal venting. The dryer is set up for front venting when it leaves the factory.
Note: where possible all efforts should be made to vent the dryer externally to avoid moisture build-up around the dryer.
External venting
The dryer can be vented directly through the wall with a flexible hose, in combination with the hose connector supplied with the dryer.

Tools and parts required:

  • Slotted screwdriver kit part includes:
  • 1 x Hose connector
  • 1 x Flexible hose
  • 1 x Flexible hose clip

Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 13

Connect the narrow end of the connector to the dryer duct pipe mouth at the back of the dryer. Then connect the flexible hose to the wide end of the connector. Use the clip to fasten the connection point between the flexible hose and connector (fasten the clip
with a screwdriver). Extend the flexible hose through the duct hole, make sure the flexible hose is not twisted to allow the air to be vented outside.|
Note: The vent system should be a maximum of two meters with no more than three 90° bends.

Electrical connection

  1. This appliance must be connected to a 220-240V, 50Hz, sinusoidal, 10A
    electrical supply.
  2. Uncoil the power cord, remove and discard the plastic pin cover and plug into a
    power socket.
  3. Connect the appliance to an earthed outlet protected by a fuse of suitable capacity.
  • Check the power cord for damage and make sure it is not squashed or twisted when
    installing the dryer.
  • Always remove the power cord from the power socket by the plug, not by the cord.

IMPORTANT!

  • Do not touch or operate the dryer with wet hands or with bare feet.
  • A damaged power cord must be replaced by a Haier-trained and supported service technician. The appliance must not be operated until it is repaired, as there is a risk of electric shock.
  • Do not operate this dryer if it has been damaged during transport. Contact your Haier-trained and supported service technician.

Product specifications

HDV70E1
Capacity (kg)* 7
DIMENSIONS (mm)
Width 600
Depth 585
Height 830
ELECTRICAL
Volts 220-240
Hz 50
Amps (maximum) 10
Rated Power (W) 1770
Waterproof degree IPX4

* Capacity refers to the maximum dry weight of items the dryer can dry at any one time.
Rated capacity is determined by a country’s performance standards, so similar dryers may have different capacities for different markets.

CONTROL PANEL

Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 14

A Press ‘Power’ button to activate your dryer. Press it again to switch the dryer off.
B ‘Key Lock’ can be used to lock the buttons on your dryer. This will avoid accidental button presses.
C There are two drying settings with your dryer, Sensor Dry and Time Dry. The default cycle is “Normal Dry – Sensor Dry”.
D Press the ‘Temperature’ button until the light next to your desired drying temperature is illuminated.
E The ‘Alarm’ and ‘Anti-crease’ Option automatically defaults for all cycles. This means a series of beeps will sound to alert at the end of a cycle, and the drum will rotate periodically and cool air will be circulated through the load to minimize wrinkling and
creasing.
F The ‘Delay’ option enables you to delay the start of the drying cycle. If you have programmed a ‘Delay’ time, the delay light is on.
G The screen displays the remaining time for a program and delay time.
H The progress lights indicate what part of the cycle the dryer is currently on.
I Press the ‘Start / Pause button to start or pause the cycle.

DRYING CYCLES

Sensor dry
Your dryer has three dryness levels from ‘Iron Dry’ through to ‘Extra Dry’. Choose the dryness level to suit your load depending on how dry you wish for your load to be.
The default temperature for sensor dry cycle is ‘High’ temperature. You can select the most appropriate temperature for each particular load to ensure you get the best result.

CYCLE  TEMPERATURE DESCRIPTION MAX. LOAD SIZE (KG)
SensorDry* High High heat cycle for rapid drying of everyday clothing, eg cotton fabrics, t-shirts, sheets, trousers. 7
Med Cooler cycle for carefully drying delicate
fabrics, eg synthetics fabrics.
4
Low A low heat cycle for the special care of
heat-sensitive fabrics. eg synthetics
fabrics, woolen, silk products.
4

‘*Extra Dry ’, ‘High’ dry temperature is the recommended cycle of the HDV70E1 model for everyday cotton items.
Time dry
It is suitable for some fabrics that you wish to dry for a specific time period. You can select 30, 60, 90, 120, 150, and 180 minute drying times.

Customizing dryer cycles 
After using your dryer a few times you may discover there are some drying options you prefer for some cycles. You can program your dryer to remember the drying options you prefer for each drying cycle. For instance, you may want to set the ‘Normal Dry’ cycle to a lower drying temperature.
To customize a cycle:

  1. Turn on your dryer.
  2. Select the cycle you wish to customize.
  3. Press and hold any of the drying options buttons for 3 seconds. The lights will flash and the display will show Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 15to indicate the dryer is in cycle adjustment mode.
  4. Select the ‘Temperature’ and ‘Option’ function options you prefer by pressing the relevant option button.
  5. Press and hold ‘Key Lock’ for 3 seconds to save the selected setting. Your dryer will then beep to indicate your customized cycle has been saved.

Factory reset
Your dryer will now be reset to the default settings it left the factory with:
Selection the ‘30min.’ cycle, press and hold the ‘Key Lock’ and ‘Delay’ buttons together for three seconds. You can reset your dryer to the default settings.

USING YOUR DRYER

IMPORTANT!

  • Check the lint filter is clean before every load. Ensure it is replaced correctly before using your dryer.
  • The lint filter indicator light will flash at the beginning of every cycle when the machine is switched on, as a reminder to check the lint filter.
  • Sort and load items into the dryer drum, ensuring no items are in the way of the door.
  • Close the door.
  • Ensure your dryer connect to an appropriate power supply(220-240V, 50Hz).
    Preparing your load
  • Check whether the loads have been spun by the washing machine.
  • Check pockets for items that could damage your clothes or get caught in the dryer.
  • Close zippers, hooks, fastenings (ie fasten the openings of duvet/doona covers), and remove loose bra wires. These may damage both your dryer and your clothes.
  • Make sure that the laundry is suitable for drying in the tumble dryer. You can find some information on the laundry labels.
    Loading the dryer
    Garments need to be loaded correctly to minimize creasing and wrinkling and to ensure the load is dried evenly. Make sure there is plenty of room for the garments to tumble freely while drying.
    To reduce tangling and creasing
  • Load items individually.
  • Ensure duvet/doona covers are fastened before placing in the dryer.
  • Shake clothes out and load individually to help items dry evenly.
  • Launder permanent press garments separately, eg business shirts.
  • Allow enough room in the dryer for clothes to tumble freely.
  • Hang garments as soon as the drying cycle is complete to reduce the need for ironing.

IMPORTANT!

  • Do not overload your dryer, as this may damage your dryer and clothes.
  • Never put dripping wet clothes in or on top of the dryer as excess water may cause an electrical hazard.
  • Do not place an item in your dryer unless the care label specifically states it is safe to do so.
  • Always follow the instructions on the care label.
  • Do not dry curtains in your dryer. Sunlight makes them brittle and they may disintegrate during drying.

USING YOUR DRYER

Switch on the power supply
Press the ‘Power button to power on your dryer.Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 16

Selecting program
Select your desired drying cycle by turning the control dial.
As you rotate the dial, the drying cycle selected will illuminate, along with the default settings for that cycle on the right side of the control panel.Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 17

Selecting temperature option
There are four drying temperatures you can choose from:
High: Clothes temperatures reach up to 80°C.
Med: Clothes temperatures reach up to 70°C.
Low: Clothes temperatures reach up to 45°C.
Airing: Cool air is blown through the dryer for the period selected.Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 18

Selecting additional option
‘Alarm’ means a series of beeps that will sound at the end of a cycle, to alert you that the dryer has finished.
‘Anti-crease’ operates up to 1 hour after your drying cycle has ended with cool air to minimize wrinkling and creasing.Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 19

Selecting delay start time
The ‘Delay’ option enables you to delay the start of the drying cycle from between 5 minutes and 12 hours. Times you can select are 5 min, 15 min, 30 min, 1 hour, then hourly up to 12 hours. This can be useful to time your drying to finish when you arrive home from work, or to start when power rates are lower.Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 20

IMPORTANT!
We suggest that you avoid using ‘Delay’ for non-colorfast items as this may cause dye run to occur.
Start the dryer
Press ‘Start / Pause button to start your dryer.Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 21

Key Lock
To turn keylock mode on or off, at any time when the dryer is powered on:
Press and hold the ‘Key Lock’ button for 2 seconds.
Note: when activated, the light under the ‘Key Lock’ button is illuminated.Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 22

CLEANING YOUR DRYER

IMPORTANT!

  • If you wish to stop the dryer before the cycle has finished you MUST remove the clothes IMMEDIATELY and spread them out to cool. DO NOT leave the clothes in the dryer or bunched up in a clothes basket. Take extreme care as the drum and the load items may be extremely hot.
  • Failure to follow the advice in this guide may result in damage to your garments and your expectations of drying performance may not be met.
  • Do not dry shoes or other rubber items in your dryer.
    When you have finished using your dryer
  • Unplug the dryer from the power socket.
  • Wipe around the door to remove any remaining condensation and/or foreign matter.
  • Clear the lint filter.

Cleaning your dryer
Before you start cleaning your dryer, ensure that it is disconnected from the power (ie unplug the dryer from the power socket).
Cleaning the control panel and outer surfaces of the dryer
Use a soft damp cloth to wipe all surfaces, then wipe dry. Avoid using chemical or scouring cleaners, as these will damage the paint and plastic surfaces of your dryer.
Cleaning the inside of your dryer
It is important that you occasionally clean the inside of your dryer. If the drum has any residual dirt or lint stuck to it, remove this and wipe it clean with a damp cloth.
Do not leave any metal objects in the drum, as these may cause rust.

Cleaning the lint filter

  • Lint is generally formed during wearing and washing.
    Fibres (ie lint) released from clothes during the drying cycle are collected in the lint filter.
  • It is important to clean the lint filter after every load, as the lint produced in the drying process can become a fire hazard if it is allowed to accumulate in or around your dryer.
  • The lint filter is located in the door opening (at the bottom).
  • There is a warning light that will flash at the beginning of every cycle to remind you to clean the filter. Lint becomes a fire hazard if left to build up, and will reduce the efficiency of your dryer.

Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 23

BEFORE YOU CALL FOR SERVICE

To clean the filter:

  1. Open the dryer door.
  2. Remove the lint filter by pulling it up and out of the filter slot.
  3. Open it out and wipe the surface clean with your hand.
  4. Close the lint filter and place it back in the opening. Ensure the filter is fitted correctly back in place before operating the dryer.

IMPORTANT!
If the lint filter becomes damaged, contact your Haier-trained and supported service technician to arrange for a replacement filter. Do not operate your dryer with a damaged lint filter or without the filter in place, as this will cause damage to your dryer.

Your dryer is capable of diagnosing a number of its own problems. It will sound a continuous series of beeps and display a code when it has a problem that you can correct yourself.

User warnings

PROBLEM DISPLAYED AS WHAT TO DO
Keylock is activated Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 24 Touch and hold the ‘Key Lock’ button for 2 seconds to deactivate the Keylock.
The door is not closed Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 25 Close the door fully and press ‘Start / Pause’.
Try opening and closing the door again.
Reposition the load, make sure the load is correctly in the drum and that protruding items are not stopping the door from closing.
Dryer has been paused Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 26 Press the ‘Start / Pause’ to resume the cycle.

Fault codes
When a continuous series of beeps is sounded, all the lights turn off on the control panel and a number appears on the display, a fault has occurred. The fault code will be displayed as followed by a number on the digital display. Record the fault code and call your Haier-trained and supported service technician to arrange service. If a fault code is being displayed, you can still turn your dryer off by pressing the ‘Power’ button.

TROUBLESHOOTING

The following is a list of problems you may encounter when using this appliance and some suggestions that may help to correct the problem. If you still have problems, please contact your Haier Repairer.

    PROBLEM POSSIBLE CAUSES WHAT TO DO
Pressing ‘Power’ does not turn on the dryer. Fault with household power supply. Try plugging in and turning on another electrical appliance.
Pressing ‘Start / Pause’does not start the drying cycle. Dryer could be displaying a user warning or fault code. Refer to page 17.
‘Delay’ function is set. Refer to page 15 for more information.
Dryer keeps stopping and starting. The ‘Anti-crease’ option has been selected. Refer to page 15 for more information.
Dryer stops working mid-cycle. Power failure. Press ‘Power’ and restart the desired cycle.
Dryer has been paused. Press the ‘Start / Pause’ button to restart the cycle.
Dryer door is open. Ensure the door is firmly shut.
Dryer is taking too long/results were
not satisfactory.
Drying cycle selected not appropriate for the load. Select an appropriate cycle for the load. Refer to pages 13, 14 and 15.
Selected drying temp, not appropriate for the load. Select a higher drying temp. Refer to page 15.
Dryer overloaded for the cycle. Some cycles have a lower max. load size. Refer to page 13.
Try dividing the load in half and dry half at a time.
Lint filter is blocked. Clean the lint filter.
Load overly wet at the start of cycle. Remove more water from the load before placing it in the dryer, eg select a faster spin on your washer, a speed appropriate for your load.
Clothes getting too hot or damaged. Cycle selected not appropriate for the load. Ensure the cycle selected is appropriate for items in the load. Refer to pages 13 and 15.
Items removed from dryer before the end of cycle cool down had finished. Removing items before cool down may damage clothing if it is not spread out and exposed to cooler air once removed from the dryer.
Fault code warning Dryer has a fault. Refer to page 17.
Noises. Dryer is overloaded. Remove some items from the dryer.
Dryer has a fault. Continuous beeping or a musical series of beeps with a message displayed on the digital display. Refer to page 17.
Beeps signalling the end of a drying cycle. End-of-cycle beeps can be turned off. Refer to page 17.
Vibration. Dryer is not installed on a stable surface. Ensure the dryer is installed on a flat, stable surface. Refer to page 7.
Dryer is overloaded. Remove some items from the dryer.
Creasing. Dryer is overloaded. Remove some items from the dryer.
‘Temperature’ selected too hot for load type. Try selecting a lower ‘Temperature’.
‘Anti-crease’ option not selected. Select the ‘Anti-crease’ option to rotate the load at the end of the drying cycle. Refer to page 15.
Dye transfer. White/light and coloured items not separated before drying. Remember to separate white/light and coloured items before placing them in the dryer.
Wet items left sitting in the dryer for long periods of time before drying. Do not leave wet items sitting in the dryer for long periods of time before drying, if they are prone to colour run.  If you do intend to leave them for long periods before drying, then separate the load and
put those items that may cause colour run aside.
Tangling. Loads not separated during loading. Try separating out larger items from smaller items.
Items loaded into the dryer incorrectly. Load items individually into the dryer. Do not place folded items in the dryer.
Load size too large. Try drying smaller load sizes. Some cycles have a lower maximum load size. Refer to pages 13 and 14.
Sheets and duvet covers due to their size, are prone to tangling. Dry sheets and duvet/doona covers separately from other laundry. Ensure duvet/doona covers are buttoned or fastened closed before drying.
Linting. Lint filter not cleaned or replaced. Ensure the lint filter is cleaned after every cycle and replaced correctly. Refer to pages 16 and 17.
Loads not sorted correctly. Dry lint givers separately from lint receivers. Dry similar colors together eg light-colored items with light-colored items, dark items with dark items. Refer to page 14.
Clothes over-dried. Over-drying clothes in the dryer can cause them to attract lint. Use an auto-sensing cycle or ensure you check your load if using the time dry cycles to avoid over-drying. Refer to page 14.
New items have been dried in the dryer recently. New towels or flannelette sheets can leave lint in the dryer, which may be picked up by subsequent loads. Clean the lint filter and use the ‘No heat’ cycle to clear any remaining lint from the dryer.
Fabric damage. Catching on metal part on items in the load. Fasten zips and other clasps before placing items in the dryer.
Items not separated or dried on an appropriate cycle for the fabric type. Dry similar items together. Ensure an appropriate cycle is selected. Refer to pages 13, 14 and 15.
Cycle or ‘Temperature’ selected not appropriate for the fabric type. Ensure the Cycle or ‘Temperature’ selected is appropriate for the fabric type. Refer to the items care label. Refer to pages 14 and 15.
Used a ‘Time Dry’ cycle and did not monitor the dryness of clothes during the cycle. Ensure that clothes are checked for dryness during the cycle when using the timed programs to avoid over-drying. Refer to pages 13 and 15.
Instructions on care label not followed. Follow the instructions on the care label of the items.

Haier Vented Clothes Dryer HDV70E1 Instruction Manual  & troubleshooting 27

0180500
2020.

FAQ


Setting up Haier Vented Clothes Dryer HDV70E1 Instruction Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Haier Vented Clothes Dryer HDV70E1 Instruction Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Haier Vented Clothes Dryer HDV70E1 Instruction Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Haier Vented Clothes Dryer HDV70E1 Instruction Manual

All symbols, colors and codes for Haier Vented Clothes Dryer HDV70E1 Instruction Manual are explained in this instruction manual. You can find everything you need and moree