hama USB 3.1 SATA Hard Drive Adapter Instructions

hama USB 3.1 SATA Hard Drive Adapter Instructions & troubleshooting

hama USB 3.1 SATA Hard Drive Adapter Instructions  & troubleshooting 1

USB 3.1 SATA HardDrive Adapter
USB-3.1-SATA-Festplattenadapter

hama USB 3.1 SATA Hard Drive Adapter Instructions  & troubleshooting 2

Operating instruction

Thank you for choosing the Hama product. Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for futurereference. If you sell the device, please pass these operating instructions on to the new owner.

Explanation of Warning Symbols and Notes

hama USB 3.1 SATA Hard Drive Adapter Instructions  & troubleshooting 3 Warning
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.

hama USB 3.1 SATA Hard Drive Adapter Instructions  & troubleshooting 4 Note
This symbol is used to indicate additional information or important notes.

Package Contents

  • USB 3.1 –SATA Adapter
  • Plug-in power supply
  • USB 3.1 connecting cable Type-A
  • USB-C 3.1 connecting cable
  • These operating instructions

Safety Notes

The product is intended for private, non-commercial use only.

  • Use the product for its intended purpose only.
  • Donot operate the product outside the power limits given in the specifications.
  • Protect the product from dirt, moisture, and overheating, and only use it in an adry environment.
  • Donot use the product in moist environments and avoid splashes.
  • Donot bend or crush the cable.
  • Always pull directly on the plug when disconnecting the cable, never on the cable itself.
  • Donot drop the product and do not expose it to any major shocks.
  • Keep this product, like all electrical products, out of the reach of children!
  • Dispose of packaging material immediately according to locally applicable regulations.
  • Donot modify the product in any way. Doing so voids the warranty.

Warning

  • Only connect the product to a socket that has been approved for the device. The socket must be installed close to the product and easily accessible.
  • Donot continue to operate the device if it becomes visibly damaged.

Connection and getting started

Warning

  • The hard drive adapter may only be used with the included plug-in power supply.
  • Pay close attention to the power and voltage information on the hard drive adapter if you decide to use another power supply unit.
  • The power supply unit’s power data must correspond to the specified parameters.
  • Make surethat all cables are unplugged from the harddrive adapter before connecting.
  • Attach the hard drive adapter to the hard drive
  • Place the hard drive on a level, stable and non-metal surface
  • Connect the power supply unit to the hard drive adapter
  • Then connect the power supply unit to an unused socket
  • Connect the included USB 3.1 cable to the hard drive adapter and an unused USB port on your PC/notebook.

Warning

  • The hard drive may not be moved after connecting the power supply unit to the socket. This could result in damage to the hard drive and data loss.
  • The hard drive adapter may not be unplugged from the PC during data transfer under any circumstance. Data may be lost.
  • Under no circumstance does Hama GmbH &Co KG accept liability for loss of data stored on data storage media.
  • The operating system of your PC /notebook will initialize the hard drive after connecting. This process may take a minute.
  • If the hard drive is already partitioned and data is on the hard drive, you can then access that data.
  • New or unpartitioned hard drives must be partitioned and formated after initialization. Refer to the operating system manual for your computer/notebook for the necessary steps to do so.

Warranty Disclaimer

Hama GmbH &CoKGassumes no liability and provides no warranty for damage resulting from improper installation/mounting, improper use of the product or
from failure to observe the operating instructions and/ or safety notes.

Service and Support

Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here: www.hama.com

Technical Data

Adapter
USB Version USB 3.1
Harddrive Version SATA (Serial ATA),

Specifications in accordance with 
Regulation (EU) 2019/1782

Manufacturer’sname or trademark, commercial registration number, and address Hama, HRA12159, Dresdner Str. 9, 86653 Monheim
Model identifier FJ-SW126G1202000E
Input voltage 100-240 V
Input AC frequency 50/60 Hz
Output voltage/Output current/Output power 12.0 VDC/ 2.0 A/ 24.0 W
Average active efficiency 87.3 %
Efficiency at low load (10 %) 81.9 %
No-load power consumption 0.08 W

hama USB 3.1 SATA Hard Drive Adapter Instructions  & troubleshooting 5Hama GmbH &CoKG
86652 Monheim/Germany
www.hama.com

All listed brands are trademarks of the corresponding companies. Errorsand omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.

FAQ


Setting up hama USB 3.1 SATA Hard Drive Adapter Instructions is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using hama USB 3.1 SATA Hard Drive Adapter Instructions is simple by using this manual. Follow the instructions one by one and everything will be fine

Is hama USB 3.1 SATA Hard Drive Adapter Instructions stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for hama USB 3.1 SATA Hard Drive Adapter Instructions

All symbols, colors and codes for hama USB 3.1 SATA Hard Drive Adapter Instructions are explained in this instruction manual. You can find everything you need and moree