HANNLOMAX PLL Alarm Clock Radio Instruction Manual

HANNLOMAX PLL Alarm Clock Radio Instruction Manual & troubleshooting

HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 2

PLL ALARM CLOCK RADIO
Model: HX-123CR
INSTRUCTION MANUAL

HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 3

CAUTION

HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 4
The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 5Warning: To reduce the risk of electric shock, do not remove cover  (or back) no user-serviceable parts inside. Refer servicing to qualified service personnel. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

  1. Read these instructions.
  2.  Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5.  Do not use this apparatus near water.
  6. Clean only with dry cloth.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
    and the point where they exit from the apparatus.
  10. Only use attachments/accessories specified by the manufacturer.HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 6
  11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
    apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
    2) Unplug the apparatus during lightning storms or when unused for long periods of time.
    3) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
    damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC NOTICE

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,  including interference that may cause undesired operation.

HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 7

QUICK REFERENCE

1. CLK / MEM

  •  Use this button to set the clock
  •  Use this button to store radio stations in the memory.
  •  Use this button to select the stored radio stations in the memory.

2. MIN / HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 8

  • Use this button to adjust the minute in CLOCK or ALARM time
  • Use this button to search the radio station in the backward direction.

3. HOUR /HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 9

  • Use this button to adjust the hour in CLOCK or ALARM time.
  • Use this button to search the radio station in the forwarding direction.

4. DIMMER ( Use this button to adjust the brightness of the display.)
5. AL2 / − (VOLUME)

  • Use this button to set the alarm time in ALARM 2
  • Use this button to decrease the volume.

6. AL1 / + (VOLUME)

  •  Use this button to set the alarm time in ALARM 1
  • Use this button to increase the volume.

7. SOURCE / AL. OFF /HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 10

  • Use this button to turn on the unit.
  • Use this button to select AM, FM, or AUX mode.
  • Use this button to turn the ALARM off after Alarm activates.

8. SNOOZE (SLEEP)

  •  Use this button to temporarily suspend the ALARM for a short period.
  •  Use this button to set the sleep time.

9. PM INDICATOR
10. ALARM 1 BUZZER INDICATOR (This indicator shows that the unit is in ALARM 1 buzzer mode.)
11. ALARM 1 RADIO INDICATOR(This indicator shows that the unit is in ALARM 1 radio mode.)
12. ALARM 2 BUZZER INDICATOR (This indicator shows that the unit is in ALARM 2 buzzer mode.)
13. ALARM 2 RADIO INDICATOR (This indicator shows that the unit is in ALARM 2 radio mode.)
14. LED DISPLAY
15. DC JACK ( Connect the unit to the AC/DC adaptor.)
16. FM WIRE ANTENNA (Extend this wire antenna to obtain better FM broadcasting.)
17. BATTERY COMPARTMENT (Compartment for the backup battery.)

SETTING THE CLOCK

  1.  With the unit in CLOCK mode, press and hold the CLK / MEM button for about 1 second, the time will
    begin to flash on the display.
  2.  Press the HOUR /HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 11button to adjust the hour.
  3.  Press the MIN/ HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 12button to adjust the minute.
  4.  When the correct time is selected, press the CLK / MEM button again to confirm.

SETTING THE ALARMS

  1. With the unit in CLOCK mode, press the AL1/+ or AL2/− button. The ALARM time will begin to flash on the display.
  2. Press the HOUR /HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 13button to adjust the alarm hour.
  3. Press the MIN /HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 14button to adjust the alarm minute.
  4. When the desired alarm time is selected, press the AL1/+ or AL2/− button to confirm.
  5.  Press the AL1/+ or AL2/− button to select the ALARM sound mode – buzzer or currently set radio station. The alarm buzzer or radio indicator will light up.

SNOOZE FUNCTION

  1. Whenever the alarm (radio or buzzer) activates, it can be temporarily suspended for a short period of 9
    minutes by pressing the SNOOZE button once.
  2. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE period has ended.
  3.  This procedure can be repeated for up to approximately one hour.

TURN OFF THE ALARM
When the Alarm activates, press the SOURCE / AL. OFF/HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 15button to turn off the Alarm.

LISTENING TO THE AM/FM RADIO

  1.  Press the SOURCE / AL. OFF /HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 16 to select AM or FM band.
  2.  Press the HOUR / HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 17 or MIN/ HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 18button step by step to tune to the desired radio stations.
  3. Press and hold the HOUR / HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 19or MIN/HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 20button for approx.1 second, it will start to search the next
    radio station in the direction of the search. The search operation simply finds stations with strong signals.
    Stations with weak reception can only be tuned in manually.
  4.  To turn off the radio, press and hold the SOURCE / AL. OFF / button for approx.. 1 second.

SETTING THE CLOCK

  1. With the unit in CLOCK mode, press and hold the CLK / MEM button for about 1 second, the time will
    begin to flash on the display.
  2.  Press the HOUR/HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 21 button to adjust the hour.
  3. Press the MIN /HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 22button to adjust the minute.
  4. When the correct time is selected, press the CLK / MEM button again to confirm.

SETTING THE ALARMS

  1.  With the unit in CLOCK mode, press the AL1/+ or AL2/− button. The ALARM time will begin to flash on the display.
  2. Press the HOUR/button to adjust the alarm hour.
  3. Press the MIN /button to adjust the alarm minute.
  4.  When the desired alarm time is selected, press the AL1/+ or AL2/− button to confirm.
  5. Press the AL1/+ or AL2/− button to select the ALARM sound mode – buzzer or currently set radio
    station. The alarm buzzer or radio indicator will light up.

SNOOZE FUNCTION

  1. Whenever the alarm (radio or buzzer) activates, it can be temporarily suspended for a short period of 9
    minutes by pressing the SNOOZE button once.
  2. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE period has ended.
  3.  This procedure can be repeated for up to approximately one hour.

TURN OFF THE ALARM
When the Alarm activates, press the SOURCE /AL. OFF/HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 23button to turn off the Alarm.

LISTENING TO THE AM/FM RADIO

  1. Press the SOURCE/ AL. OFF /HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 24 to select AM or FM band.
  2.  Press the HOUR/HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 25 or MIN/ HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 26button step by step to tune to the desired radio stations.
  3. Press and hold the HOUR/ HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 27or MIN /HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 28button for approx.1 second, it will start to search the next
    radio station in the direction of the search. The search operation simply finds stations with strong signals.
    Stations with weak reception can only be tuned in manually.
  4. To turn off the radio, press and hold the SOURCE / AL. OFF /HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 29 button for approx.. 1 second.

SAVING A RADIO STATION TO THE MEMORY

  1.  Tune the radio to the desired station.
  2. Press and hold the CLK / MEM button to store this radio station in the next memory station number. The display will show PXX (XX is the memory station number from 01 to 10)
  3. Up to 10 AM and 10 FM radio stations can be stored in the memory.

TO LISTEN TO A SAVED RADIO STATION

  1.  Press the SOURCE /AL. OFF/HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 30button to select AM or FM band.
  2.  Press the CLK / MEM button to skip to the next stored radio station.

SLEEP TO MUSIC FUNCTION

  1. This function allows you to listen to the radio while you fall asleep.
  2. Press the SNOOZE button, the display will show the default sleep time of 90 minutes.
  3. Press the SNOOZE button repeatedly to set the desired sleep time. (90-80-70-60-50-40-30-20-10 min.or OFF)
  4.  After the pre-set time has elapsed, the radio will turn off automatically.

DIMMER CONTROL
Press the DIMMER button to select the brightness of the display

SPECIFICATIONS

Frequency Range: AM: 520-1710 KHz
FM: 87.5 – 108 MHz
Power Supply: AC 120V ~ 60 Hz
Rated Output: DC6V HANNLOMAX PLL Alarm Clock Radio Instruction Manual  & troubleshooting 31100mA
Back-Up Battery: 2 pcs. UM4 AAA size (Battery not included)

Specifications are subject to change without prior notice.

FAQ


Setting up HANNLOMAX PLL Alarm Clock Radio Instruction Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using HANNLOMAX PLL Alarm Clock Radio Instruction Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is HANNLOMAX PLL Alarm Clock Radio Instruction Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for HANNLOMAX PLL Alarm Clock Radio Instruction Manual

All symbols, colors and codes for HANNLOMAX PLL Alarm Clock Radio Instruction Manual are explained in this instruction manual. You can find everything you need and moree