helpdesk 2 Drawer Filing Cabinet Instructions

helpdesk 2 Drawer Filing Cabinet Instructions & troubleshooting

helpdesk 2 Drawer Filing Cabinet Instructions
helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 1

Important – Please read these instructions fully before starting assembly.

If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123 Please turn to back page for important information when contacting Customer Helpline.

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 2Safety and Care Advice

Important – Please read these instructions fully before starting assembly

  • Check you have all the components and tools listed on pages 2 and 3.
  • Remove all fittings from the plastic bags and seperate them into their groups.
  • Keep children and animals away from the work area, small parts could choke if swallowed.
  • Make sure you have enough space to layout the parts before starting.
  • Do not stand or put weight on the product, this could cause damage.
  • Assemble the item as close to its final position (in the same room) as possible.
  • Assemble on a soft level surface to avoid damaging the unit or your floor.
  • Parts of the assembly will be easier with 2 people.
  • We do not recommend the use of power drill/drivers for inserting screws, as this could damage the unit. Only use hand screwdrivers.
  • Do Not dispose of packaging until assembly complete.
  • Dispose of all packaging carefully and responsibly when assembly complete.

Care and maintenance

  • To protect the furniture, position the furniture out of direct sunlight and away from direct heat sources such as radiators and fires.
  • Do not place the furniture in excessively dry and humid conditions.
  • From time to time check that there are no loose screws on this unit.
  • Always lift furniture when moving it (do not drag) otherwise the joints may be damaged.
  • Do not place hot or cold objects on the surface, always use protective mats to avoid marking the furniture.
  • This product should not be discarded with household waste. Take to your local authority waste disposal centre.
  • Clean spills up immediately
  • Dust surfaces with a soft, dry, lint free cloth.
  • More stubborn marks can be removed using a damp (not wet) cloth. Wipe the surface dry immediately using a soft lint free cloth.
  • Do not use detergents, abrasive cleaning products or cleaning products that contain ammonia, solvents or silicone as these may damage the surface finish.

Please check you have all the panels listed below

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 3 Important – Thick lines indicate finished edges

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 4

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly, In some case more fittings may be supplied than are required.
helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 5

Tools required

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 6

Exploded View

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 7

Assembly Instructions

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 8

Step 1

Fitting dowels to top panel.
Insert 4 metal dowels into the top panel 1390 B
Note: Tighten metal dowels up fully against the panel. Do not over-tighten.

Step 2

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 9

Fitting wooden dowels to the plinth panels.
Insert 4 wooden dowels O  into the plinth panel 1394 .

Step 3

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 10

Fitting cams and dowels to the end panels.
a: Insert 2 metal cams A and 2 metal dowels B into left end panel 1 3 9 1 .
b: Insert 2 metal cams A  and 2 metal dowels B  into right end panel 1 3 9 2.

Assembly Instructions

Step 4

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 11

Attaching the left bracket to the left end.
Using 2 screws ,E secure the bracket LI  to the left end panel 1391 as shown in diagram 1.
Use 1 screw to secure the front of the bracket. Repeat on all brackets.

Step 5

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 12

Attaching the right bracket to the right end. Using 2 screws ,E secure the bracket RI  to
the right end panel 1392 as shown in diagram 1.
Use 1 screw to N secure the front of the bracket. Repeat on all brackets.

Step 6

Inserting cams into the bottom panel.
Insert 4 cams  A  into the  bottom panel 1393.
helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 13

Assembly Instructions

Step 7

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 14

Drawer assembly
helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 15
a: Insert dowels into drawer front 1396
Note: Insert metal dowels as far as shown by arrows. Repeat on 1395 Do not over tighten.

b: Insert small cams into left 622xx7002 and right 623xx7002 drawer sides.
Note: Ensure cam arrow points towards the edge with hole.
helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 16
helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 17
c: Insert wooden dowels in drawer back  624xx7008 into holes in left 622xx7002  right 623xx7002 drawer sides
helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 18

Assembly Instructions

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 19

Assembly Instructions

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 20

Assembly Instructions

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 21

Congratulation! you unit is complete

helpdesk 2 Drawer Filing Cabinet Instructions  & troubleshooting 22

Important Information

If you need help or have damaged or missing parts, call the Customer Helpline:
01709 534123 8am – 4.30pm (Monday to Thursday)
8am – 2.30pm (Fridays)
Please have the following information to hand:
>> Unit Description
>> Product Code
>> Product Colour
>> Place of Purchase
>> Catalogue Ref. No.
>> Item Code
>> Assembly Instructions

We do have an answer machine should you contact us out of office hours, so in addition to the above information could you leave your name, address, daytime telephone number and the nature of your call on the answerphone. All calls will be actioned asap.

You can also e-mail your requests to us at:
[email protected]
Alternatively, you can write to us at: Customer Service Department, Addspace Furniture Limited,
Braithwell Way, Hellaby Industrial Estate, Hellaby, Rotherham, South Yorkshire, S66 8QY.

 

Read More About This Manual & Download PDF:

FAQ


Setting up helpdesk 2 Drawer Filing Cabinet Instructions is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using helpdesk 2 Drawer Filing Cabinet Instructions is simple by using this manual. Follow the instructions one by one and everything will be fine

Is helpdesk 2 Drawer Filing Cabinet Instructions stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for helpdesk 2 Drawer Filing Cabinet Instructions

All symbols, colors and codes for helpdesk 2 Drawer Filing Cabinet Instructions are explained in this instruction manual. You can find everything you need and moree