Honeywell CT50-CB ChargeBase and NetBase User Guide

Honeywell CT50-CB ChargeBase and NetBase User Guide & troubleshooting

Honeywell CT50-CB ChargeBase and NetBase

Honeywell CT50-CB ChargeBase and NetBase User Guide  & troubleshooting 1

Out of the Box

Make sure that your shipping box contains these items:

  • CT50 ChargeBase (CT50-CB) or NetBase (CT50-NB)
  • Power supply
  • Power cord
  • Quick start guide and regulatory compliance sheet

If any of these items are missing or appear damaged, contact your Customer Account Representative. Keep the original packaging in the event that you need to return the ChargeBase or NetBase for service or if you want to store the charger while not in use.

Honeywell CT50-CB ChargeBase and NetBase User Guide  & troubleshooting 2 Caution: We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.

Connect Power

Use only a UL Listed power supply which has been qualified by Honeywell with an output rated at 12 V / 7 A. The power supply input rating is 90-264 VAC, 50/60 Hz. The operating temperature is -20 °C to 50 °C (-4 °F to 122 °F).

  1. Plug the power cord into the power supply.
  2. Plug the power supply cable into the power connector on the back of the charger.
  3. Plug the power cord into a standard wall outlet.
    Honeywell CT50-CB ChargeBase and NetBase User Guide  & troubleshooting 3

Charge the Battery Pack

Honeywell CT50-CB ChargeBase and NetBase User Guide  & troubleshooting 4 Caution: Make sure that all components are dry prior to using the computers and batteries with accessories. Using
  • Insert one to four CT50s with battery packs inserted into the ChargeBase or NetBase.
    Honeywell CT50-CB ChargeBase and NetBase User Guide  & troubleshooting 5

Mount the ChargeBase or NetBase

You can mount the charger on a flat, horizontal surface such as a desktop or workbench with an optional DIN rail. Mounting hardware required:

  • DIN rail
  • 3/16-inch diameter x 5.8-inch long pan head screw
  • 1/2-inch OD x 7/32-inch ID x 3/64-inch thick washer
  • 3/16-inch diameter nut
  1. Slide the DIN rail into the slot on the bottom of the ChargeBase or NetBase.
  2. Secure the DIN rail to the flat surface with the hardware.
    Honeywell CT50-CB ChargeBase and NetBase User Guide  & troubleshooting 6

Agency Information

Honeywell CT50-CB ChargeBase and NetBase User Guide  & troubleshooting 7
UL and C-UL Statement
UL and C-UL listed: UL 60950-1, Second Edition and CSA C22.2 No.60950-1-07, Second Edition.
Honeywell CT50-CB ChargeBase and NetBase User Guide  & troubleshooting 8
RCM Mark
Complies with ACMA regulatory arrangements.
Honeywell CT50-CB ChargeBase and NetBase User Guide  & troubleshooting 9
Customs Union Approval
Honeywell CT50-CB ChargeBase and NetBase User Guide  & troubleshooting 10
Mexico
Conforms to NOM-019
USA

FCC Part 15 Subpart B Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio or television technician for help.

If necessary, the user should consult the dealer or an experienced radio/ television technician for additional suggestions. Honeywell is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Honeywell.
The correction is the responsibility of the user.
Use only shielded data cables with this system. This unit has been tested with cables less than 3 meters. Cables greater than 3 meters may not meet class B performance. Caution: Any changes or modifications made to this equipment not expressly approved by Honeywell may void the FCC authorization to operate this equipment.

Canada

Industry Canada ICES-003

This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.
Europe

Honeywell CT50-CB ChargeBase and NetBase User Guide  & troubleshooting 11 The CE marking indicates compliance to 2014/30/EU EMC Directive with Standards EN55032 CLASS B, EN55024, EN61000-3-2, EN61000-3-3. 2011/65/EU ROHS (Recast). In addition, complies to 2014/35/EU Low Voltage Directive, when shipped with recommended power supply.

European contact: Honeywell Productivity Solutions BV Lagelandseweg 70 6545 CG Nijmegen The Netherlands Honeywell International Inc. shall not be liable for use of our product with equipment (i.e., power supplies, personal computers, etc.) that is not CE marked and does not comply with the Low Voltage Directive. Use only shielded data cables with this system. This unit has been tested with cables less than 3 meters. Cables greater than 3 meters may not meet class B performance. Certified to CB Scheme IEC 62368-1, Second Edition. Refer to www.honeywellaidc.com/environmental for the RoHS / REACH / WEEE information.

Support

To search our knowledge base for a solution or log into the Technical Support portal and report a problem, go to www.hsmcontactsupport.com.

User Documentation

For the user guide and other documentation, go to www.honeywellaidc.com.

Limited Warranty

For warranty information, go to www.honeywellaidc.com and click Resources > Warranty.

Patents

For patent information, see www.hsmpats.com.

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made. The information in this publication does not represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results. This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII.

Copyright © 2015-2020 Honeywell International Inc. All rights reserved.

Honeywell CT50-CB ChargeBase and NetBase User Guide  & troubleshooting 12

References

FAQ


Setting up Honeywell CT50-CB ChargeBase and NetBase User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Honeywell CT50-CB ChargeBase and NetBase User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Honeywell CT50-CB ChargeBase and NetBase User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Honeywell CT50-CB ChargeBase and NetBase User Guide

All symbols, colors and codes for Honeywell CT50-CB ChargeBase and NetBase User Guide are explained in this instruction manual. You can find everything you need and moree