HYPERX SoloCast User Guide

31 May 2022 adminHYPERX

Contents hide

1 HYPERX SoloCast

2 Overview

2.1 Using PC or PS4

3 Microphone Position

3.1 Muting the Microphone

4 Documents / Resources

4.1 References

HYPERX SoloCast

Overview

A Tap-to-mute sensor
B Microphone status LED
C Microphone alignment guide
D Microphone stand
E USB-C port
F USB cable

Using PC or PS4

Microphone Position

SoloCast should be placed with the front of the microphone facing the sound source. This is indicated by the alignment guide on both the microphone and the stand.
SoloCast can be rotated to allow for easy placement under a monitor.

Muting the Microphone

Tap the top of the microphone to mute/unmute the microphone. The microphone status LED will ash when the mute is enabled.Using a Microphone Mount

SoloCast can be removed from its stand and used with microphone mounts with either 3/8” or 5/8” threads.Questions or Setup Issues?

Contact the HyperX support team or see user manual at: hyperxgaming.com/support/microphones

References

NGENUITY – Programmable RGB LED Software | HyperX

FAQ

Setting up HYPERX SoloCast User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using HYPERX SoloCast User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is HYPERX SoloCast User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for HYPERX SoloCast User Guide

All symbols, colors and codes for HYPERX SoloCast User Guide are explained in this instruction manual. You can find everything you need and moree