iiglo Sitstand Desk Frame W / Crank Instruction Manual

iiglo Sitstand Desk Frame W / Crank Instruction Manual & troubleshooting

iiglo Sitstand Desk Frame W / Crank Instruction Manual
iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 1

Level Adjustment

  • Turn over the desk frame with the crossbar facing up.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 2
  • Pull the handle outward first to adjust the desk height.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 3
  • There are two adjustable foot pads under each foot. If the floor isn’t even, simply turn the pad to adjust the height to make the desk stable.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 4
    Tip: Use a bubble level to check if the desktop is even.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 5

Preface

This manual height adjustable standing desk consists of a heavy-duty steel desk frame, and a manual height adjustment system. Please read and completely understand this manual before installation in order to make sure the safe and correct use of the system and maintain the longevity of the overall construction.

Instructions of Safety and Warnings:

  • Any failure to comply with the safety and installation instructions in this manual may cause serious bodily injury.
  • Any incomplete observation of the instructions, wamings and additional information marked with the “Note” and “A” may result in serious damage to the system or its components.
  • This product can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  • Persons with reduced physical, mental abilities and or lack of experience and knowledge must not use the product, unless they’re under supervision, understand the hazards involved or they have been thoroughly instructed in the use of the apparatus by a person who is responsible for the safety of these persons.
  • Users should make sure that they never sit on the desktop in order to prevent serious bodily injury.

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 6Other Safety Instructions:

  • Clear up all obstacles within the height adjustment range.
  • Any attempts to reconstruct the desk frame aren’t allowed. • Don’t add anything to the adjustable junctions of the desk frame.
  • Outdoor use is prohibited.

Preparation

  1. What are the specifications you need to know
    Weight capacity
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 7
    Operation temperature
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 8
  2. What are the tools you require while installation
    Bubble Level
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 9
    Allen Wrench (included) 
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 10
    Drill
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 11
    Phillips Screwdriver
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 12
  3. What’s the thing you’d better have before installation?
    A Shipping Blanket to protect the desk and floor
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 13 
  4. Things you need to know before installation
    Please check all of the components shown in the component checklist. If any of the components are missing or damaged, contact your point of purchase for a replacement.

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 14Disposal:
The product with this mark indicates that this product shouldn’t be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the local recycle service or contact your point of purchase to withdrawn the product.

Check list and Installation

  • A (x1) Crossbar

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 15

  • B (x1) Lifting Column

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 16

  • C (xl) Lifting Colt

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 17

  • D (x1) Crossbar Spacer
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 18
  • E (x2) Side Bracket

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 19

  • F (x1) Sync Rod

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 20

  • G (x1) Drive Rod Module

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 21

  • H (x2) Foot

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 22

  • S-A (x16) Hex Head Screw

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 23

  • S-B (x4) Phillips Head Screw

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 24

  • S-C (x10) Phillips Head Screw+ 1 Spacer

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 25

  • S-D (x10) Anti-Vibration Pad

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 26

  • S-E (x1) Allen Wrench

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 27

START INSTALLATION

Assembling the Crossbar

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 28

  • Please prepare a spacious area for installation, and put a shipping blanket on the area to prevent scratches on the floor and the frame.
  • Loosen the hex head screws that fix the adjustable junction, but don’t completely take out the screws.
    Note: The drawing of the crossbar is the backside of it.

Installing the side brackets

  • Attach the side bracket 0 to the end of the lifting
    column using the 2 screws CD as shown with the Allen wrench op
    .iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 29
  • Repeat the same process to assemble the other side bracket
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 30
  • Attach one end of the crossbarOand crossbar spacer 0 to the lifting column 0 with 2 screws CD using the Allen wrench CD as shown.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 31
  • Attach the other end of the crossbar to the lifting column ewith 2 screwser3 using the Allen wrench a D
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 32

Note: Maintain the lifting columns in a FACE DOWN position during installation. This will aid in the remaining assembly steps.

Assembling the Sync Rod

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 33

  • Turn the left knob clockwise as shown to loosen the sync rod F.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 34
  • Attach the end of the sync rod as shown to the motor spindle in red line position and turn the left knob counterclockwise to tighten the connection.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 35

Assembling the Sync Rod
iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 36

  •  Turn the right knob counterclockwise as shown to loosen the sync rod.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 37  iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 38
  • Insert the other end of the sync rod into the column as shown.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 39
  • Turn the right knob counterclockwise as shown to loosen the sync rod.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 40
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 41
  • Insert the other end of the sync rod into the column as shown.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 42

Assembling the Desktop

  • Attach the anti-vibration pad en to the surface of the crossbar on the ten positions as shown.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 43
  • Align the previously drilled screw holes with the mounting holes on the crossbar. Insert and tighten the 10 screws ca from below.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 44
  •  Loosen the screw using Alan wrench S-E) to adjust the &Ivo rod modulo G for suiting the width of the desktop.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 45
  • Insert the drive rod module into the gearbox as shown and tighten the screw to finish the adjustment.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 46
  • Fix the drive rod module onto the back of the desktop with the (S-B) as shown.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 47

Installing the feet

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 48

iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 49

  • Place the foot on the bottom of the lifting column. Align the mounting holes on the foot with the screw holes on the lifting column.
  • Fix the foots H 4 screws S-A using the Allen wrench SE .
  • Repeat the same process to assemble the other foot.
  • Loosen the screw using Allen wrench  to adjust the drive rod module for suiting the width of the desktop.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 50
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 51
  • Insert the drive rod module into the gearbox as shown and tighten the screw to finish the adjustment.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 52
  • Fix the drive rod module onto the back of the desktop with the screws cm as shown.
    iiglo Sitstand Desk Frame W / Crank Instruction Manual  & troubleshooting 53

FAQ


Setting up iiglo Sitstand Desk Frame W / Crank Instruction Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using iiglo Sitstand Desk Frame W / Crank Instruction Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is iiglo Sitstand Desk Frame W / Crank Instruction Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for iiglo Sitstand Desk Frame W / Crank Instruction Manual

All symbols, colors and codes for iiglo Sitstand Desk Frame W / Crank Instruction Manual are explained in this instruction manual. You can find everything you need and moree