IRONTON Utility Cart Owner’s Manual

IRONTON Utility Cart Owner’s Manual & troubleshooting

IRONTON Utility Cart Owner’s Manual  & troubleshooting 1

Utility Cart
Owner’s Manual

IRONTON Utility Cart Owner’s Manual  & troubleshooting 2

IRONTON Utility Cart Owner’s Manual  & troubleshooting 3WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.

Item #53409, #53410, #53411, #53412

SAVE THESE INSTRUCTIONS

Thank you very much for choosing an Ironton™ product!
For future reference, please complete the owner’s record below:
Serial Number/Lot Date Code: ________________________________
Purchase Date: ____________________________________________
Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it. This utility cart is designed for certain applications only. Northern Tool & Equipment is not responsible for issues arising from modification or improper use of this product such as an application for which it was not designed. We strongly recommend that this product not be modified and/or used for any application other than that for which it was designed.
For technical questions, please call 1-800-222-5381.

Intended Use

Heavy-duty structural foam construction makes this Ultra-Tow utility cart tough enough for long, rugged use. It’s easy to assemble and handles a wide variety of industrial and commercial handling needs.

Technical Specifications

Item #

Capacity Shelf Product Size

Caster

53409

500 lbs. 2 40x17x32.9″ 5″

53410

500 lbs. 3 40x17x32.9″ 5″
53411 500 lbs. 3 46.6×25.4×32.7″

5″

53412 500 lbs. 2 46.6×25.4×32.7″

5″

Important Safety Information

IRONTON Utility Cart Owner’s Manual  & troubleshooting 4 WARNING

  • Read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage.
  • The warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercise common sense and caution when using this tool. Always be aware of the environment and ensure that the tool is used in a safe and responsible manner.
  • Do not allow persons to operate or assemble the product until they have read this manual and have developed a thorough understanding of how it works.
  • Do not modify this product in any way. Unauthorized modification may impair the function and/or safety and could affect the life of the product. There are specific applications for which the product was designed.
  • Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger industrial equipment. There are certain applications for which this equipment was designed. This product will be safer and do a better job at the capacity for which it was intended. DO NOT use this equipment for a purpose for which it was not intended.
  • Industrial or commercial applications must follow OSHA requirements.

IRONTON Utility Cart Owner’s Manual  & troubleshooting 5 WARNING

  • This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

IRONTON Utility Cart Owner’s Manual  & troubleshooting 6 WARNING
WORK AREA SAFETY

  • Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit. Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas may put you dangerously close to other cutting tools and rotating parts.
  • Keep children and bystanders away from the work area while operating the tool. Do not allow children to handle the product.

IRONTON Utility Cart Owner’s Manual  & troubleshooting 7 WARNING
PERSONAL SAFETY

  • Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool may result in serious personal injury.
  • Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Air vents on the tool often cover moving parts and should be avoided.
  • Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems, and hearing protection when appropriate. This applies to all persons in the work area.
  • Do not overreach. Keep proper footing and balance at all times.
  • Do not use the tool when tired or under the influence of drugs, alcohol or medication.

IRONTON Utility Cart Owner’s Manual  & troubleshooting 8  CAUTION
LIGHT USE AND CARE

  • Do not force the product. Products are safer and do a better job when used in the manner for which they are designed. Plan your work, and use the correct product for the job.
  • Check for damaged parts before each use. Carefully check that the product will operate properly and perform its intended function. Replace damaged or worn parts immediately. Never operate the product with a damaged part.
  • Store the product when it is not in use. Store it in a dry, secure place out of the reach of children. Inspect the tool for good working condition prior to storage and before re-use.
  • Use only accessories that are recommended by the manufacturer for use with your product. Accessories that may be suitable for one product may create a risk of injury when used with another tool. Never use an accessory that has a lower operating speed or operating pressure than the tool itself.

Specific Operation Warnings

IRONTON Utility Cart Owner’s Manual  & troubleshooting 9 WARNING

  • Do not exceed the rated load capacity.
  • Be aware of dynamic loading. A sudden loading movement may briefly create an excess load causing product failure.
  • Do not allow riders.
  • Use only on a hard level surface. Inspect before each use.
  • Do not use if parts are damaged.

#53409 & #53412 Assembly Instructions

2-Shelf Utility Carts

  1. Place one Tray (1A) upside down on the work surface. Locate the Handle (3). Turn it upside down with the cup holder toward the Tray (1A) and the hand holes on the outside. Using a rubber mallet, tap the Handle (5) down into the grooves on the Tray (1A). See Figure A.
  2. Locate the two Beams (4). Place one on the Tray (1A) corner nearest the Handle (3), and place one on the diagonal corner located on the outside of the Tray (1A), as in the assembly diagram. Make certain that the end with the screw holes is facing upward. Using a rubber mallet, tap the Beams (4) down into the Tray (1A). Note: Position the Beams (4) so that the flange in each matches the space in the Tray (1A). See Figure B.
  3. Locate the two Beams (5). Place one on the Tray (1A) corner nearest the Handle (3), and place one on the diagonal corner located on the outside of the Tray (1A), as in the assembly diagram. Make certain that the end with the screw holes is facing upward. Using a rubber mallet, tap the Beams (5) down into the Tray (1A). Note: Position the Beams (5) so that the flange in each matches the space in the Tray (1A). See Figure B.
  4. Inserts Screws (2) down through each Beam (4) and each Beam (5) into the Tray (1A). See Figures B & C.
  5. Locate the second Tray (1) and turn it upside down. Set the second Tray (1) onto the Beams (4 & 5) making certain that both Trays (1) are facing the same way. See Figure C.
  6. Turn the cart upside down. Attach two Casters (8) with the Swivel Caster Brackets (6) using a Nut (7) and Screw (9), if necessary. Thread a Screw (13) through the Tray (1) and into the Casters (8).
  7. Attach one Split Washer (11) and one Nut (12) for each hole. See Figure D.
  8. Attach another two Casters (8) with the Fixed Caster Brackets (#10) using a Nut (7) and Screw (9), if necessary. Thread a Screw (13) through the Tray (1) and into the Casters (8). Attach one Split Washer (11) and one Nut (12) for each hole. See Figure D.
  9. Place the two Swivel Caster Brackets on the same side of the Tray (1A) as the Handle (3).
  10. Place the two Fixed Caster Brackets on the other side of the Tray (1A). See Figure D.
  11. Turn the cart upright. Make certain that all hardware is tight. Make certain that the Fixed Casters and Swivel Casters roll properly.
    IRONTON Utility Cart Owner’s Manual  & troubleshooting 10IRONTON Utility Cart Owner’s Manual  & troubleshooting 11

#53410 & #53411 Assembly Instructions

3-Shelf Utility Carts

  1. Place one Tray (1A) upside down on the work surface. Locate the Handle (3). Turn it upside down with the cup holder toward the Tray (1A) and the hand holes on the outside. Using a rubber mallet, tap the Handle (5) down into the grooves on the Tray (1A). See Figure A.
  2. Locate the two Beams (4). Place one on the Tray (1A) corner nearest the Handle (3), and place one on the diagonal corner located on the outside of the Tray (1A), as in the assembly diagram. Make certain that the end with the screw holes is facing upward. Using a rubber mallet, tap the Beams (4) down into the Tray (1A). Note: Position the Beams so that the flange in each matches the space in the Tray (1A). See Figure B.
  3. Locate the two Beams (5). Place one on the Tray (1A) corner nearest the Handle (3), and place one on the diagonal corner located on the outside of the Tray (1A), as in the assembly diagram. Make certain that the end with the screw holes is facing upward. Using a rubber mallet, tap the Beams (5) down into the Tray (1A). See Figure B.
  4. Inserts Screws (2) down through each Beam (4) and each Beam (5) into the Tray (1A). See Figures B & C.
  5. Locate the second Tray (1B) and turn it upside down. Set the second Tray (1B) onto the Beams (4 & 5), in the middle of the Beams. Secure the Tray into the brackets on the Beams. See Figure C.
  6. Locate the third Tray (1C) and turn it upside down. Set the third Tray (1C) onto the Beams (4 & 5) making certain that both Trays (1C) are facing the same way. See Figure D.
  7. Turn the cart upside down. Attach two Casters (8) with the Swivel Caster Brackets (6) using a Nut (7) and Screw (9), if necessary. Thread the Screw (13) through the Tray (1C) and into the Casters (8). Attach one Split Washer (11) and one Nut (12) for each hole. See Figure E.
  8. Attach another two Casters (8) with the Fixed Caster Brackets (10) using a Nut (7) and Screw (9), if necessary. Thread a Screw (13) through the Tray (1C) and into the Casters (8). Attach one Split Washer (11) and one Nut (12) for each hole. See Figure E.
  9. Turn the cart upright. Make certain that all hardware is tight. Make certain the Fixed Casters and Swivel Casters roll properly.
    IRONTON Utility Cart Owner’s Manual  & troubleshooting 12IRONTON Utility Cart Owner’s Manual  & troubleshooting 13IRONTON Utility Cart Owner’s Manual  & troubleshooting 14

Before Each Use

IRONTON Utility Cart Owner’s Manual  & troubleshooting 15 WARNING
Inspect the unit before every use; do not use if parts are loose or damaged.

After Each Use

IRONTON Utility Cart Owner’s Manual  & troubleshooting 16 WARNING
Store unit in a dry location to prevent rust.

#53409 & #53412 Parts Diagram

IRONTON Utility Cart Owner’s Manual  & troubleshooting 17

#53409 & #53412 Parts List

Reference

Part Number Part Description Quantity

1

1 Tray

2

2 2 Screw

12

3

3 Handle

1

4 4 Beam

2

5

5 Beam 2
6 6 Bracket of Swivel Caster

2

7

7 Nut 4
8 8 Caster

4

9

9 Screw 4
10 10 Bracket of Fixed Caster

2

11

11 Split Washer M8 16
12 12 Nut

16

13

13 Screw 16
14 14 Rod

1

15

15 Small washer

16

#53410 & #53411 Parts Diagram

IRONTON Utility Cart Owner’s Manual  & troubleshooting 18

#53410 & #53411 Parts List

Reference

Part Number Part Description Quantity  
1 1 (1A,1B,1C) Tray

3

2

2 Screw 12
3 3 Handle

1

4

4 Beam 2
5 5 Beam

2

6

6

Bracket of Swivel Caster

2
7 7 Nut

4

8

8 Caster 4
9 9 Screw

4

10

10 Bracket of Fixed Caster 2
11 11 Split Washer M8

16

12

12 Nut 16
13 13 Screw

16

14

14 Rod 1
15 15 Small washer

16

Replacement Parts

  • For replacement parts and technical questions, please call Customer Service at 1-800-222-5381.
  • Not all product components are available for replacement. The illustrations provided are a convenient reference to the location and position of parts in the assembly sequence.
  • When ordering parts, the following information will be required: item description, item model number, item serial number/item lot date code, and the replacement part reference number.
  • The distributor reserves the rights to make design changes and improvements to product lines and manuals without notice.

Limited Warranty

Northern Tool and Equipment Company, Inc. (“We” or ‘”Us”) warrants to the original purchaser only (“You” or “Your”) that the Ironton product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase. The foregoing warranty is valid only if the installation and use of the product is strictly in accordance with product instructions. There are no other warranties, express or implied, including the warranty of merchantability or fitness for a particular purpose. If the product does not comply with this limited warranty, Your sole and exclusive remedy is that We will, at our sole option and within a commercially reasonable time, either replace the product or product component without charge to You or refund the purchase price (less shipping). This limited warranty is not transferable.

Limitations on the Warranty
This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a result of any accident or in any other manner; (c) damage from misapplication, overloading, or improper installation; (d) improper maintenance and repair; and (e) product alteration in any manner by anyone other than Us, with the sole exception of alterations made pursuant to product instructions and in a workmanlike manner.

Obligations of Purchaser
You must retain Your product purchase receipt to verify date of purchase and that You are the original purchaser. To make a warranty claim, contact Us at 1-800-222-5381, identify the product by make and model number, and follow the claim instructions that will be provided. The product and the purchase receipt must be provided to Us in order to process Your warranty claim. Any returned product that is replaced or refunded by Us becomes our property. You will be responsible for return shipping costs or costs related to Your return visit to a retail store.

Remedy Limits
Product replacement or a refund of the purchase price is Your sole remedy under this limited warranty or any other warranty related to the product. We shall not be liable for: service or labor charges or damage to Your property incurred in removing or replacing the product; any damages, including, without limitation, damages to tangible personal property or personal injury, related to Your improper use, installation, or maintenance of the product or product component; or any indirect, incidental or consequential damages of any kind for any reason.

Assumption of Risk
You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product instructions is at Your own risk.

Governing Law
This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state. Some states do not allow limitations or exclusions on implied warranties or incidental or consequential damages, so the above limitations may not apply to You. This limited warranty is governed by the laws of the State of Minnesota, without regard to rules pertaining to conflicts of law. The state courts located in Dakota County, Minnesota shall have exclusive jurisdiction for any disputes relating to this warranty.

IRONTON Utility Cart Owner’s Manual  & troubleshooting 19Distributed by:
Northern Tool & Equipment Company, Inc.
Burnsville, Minnesota 55306
www.northerntool.com
Made in Vietnam

FAQ


Setting up IRONTON Utility Cart Owner’s Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using IRONTON Utility Cart Owner’s Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is IRONTON Utility Cart Owner’s Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for IRONTON Utility Cart Owner’s Manual

All symbols, colors and codes for IRONTON Utility Cart Owner’s Manual are explained in this instruction manual. You can find everything you need and moree