JBL Fuse Passive Dual Subwoofer Installation Guide

JBL Fuse Passive Dual Subwoofer Installation Guide & troubleshooting

JBL Fuse Passive Dual Subwoofer Installation Guide
JBL Fuse Passive Dual Subwoofer Installation Guide  & troubleshooting 1

THANK YOU FOR YOUR PURCHASE .

Your JBL product has been designed to provide you with the performance and ease of operation you would expect from JBL.

ABOUT THE MANUAL

This manual describes general installation guidelines. However, please note that proper installation of mobile audio components requires qualified experience. If you do not have the knowledge and tools to successfully perform this installation, we strongly recommend consulting an authorized JBL dealer about your installation options. Keep all instructions and sales receipts for reference.

JBL Fuse Passive Dual Subwoofer Installation Guide  & troubleshooting 2

DIMENSIONS

JBL Fuse Passive Dual Subwoofer Installation Guide  & troubleshooting 3

MOUNTING THE FUSE

Vertical mounting

  1.  Select a suitable location in the cargo area or trunk.
  2. Use the included screws to secure the feet to the mounting surface.
    NOTE: Before drilling pilot holes for the mounting screws, check beneath the mounting surface to ensure you will not
    puncture fuel lines, brake lines, or any vehicle wires.
    JBL Fuse Passive Dual Subwoofer Installation Guide  & troubleshooting 4

Separating the twin enclosures
JBL Fuse Passive Dual Subwoofer Installation Guide  & troubleshooting 5

  1. Remove four screws securing the mounting feet; remove mounting feet.
  2. Remove speaker grilles.
  3. Remove four (4) bolts securing twin enclosures.
  4. Separate twin enclosures.

Floor mounting

  1.  Select a suitable location, such as under a seat.
  2. Use the included bolts to secure to the mounting surface.
  3. Replace speaker grilles.

NOTE: Before drilling pilot holes for the mounting screws, check beneath the mounting surface to ensure you will not
puncture fuel lines, brake lines, or any vehicle wires.
JBL Fuse Passive Dual Subwoofer Installation Guide  & troubleshooting 6

Wiring the subwoofers

Connect the speaker outputs of your power amplifier to the spring terminals of the Fuse enclosures using 14-gauge speaker wire (not included).
NOTE: Be sure to observe proper wire polarity.

JBL Fuse Passive Dual Subwoofer Installation Guide  & troubleshooting 7

SPECIFICATIONS

Continuous power handling 200 watts RMS
Peak power handling 600 watts
Frequency response 30 Hz – 200 Hz
Nominal impedance 2 ohms (parallel connection)

4 ohms separating twin enclosure

Sensitivity @ 2.83V 90 dB

 

 

Read More About This Manual & Download PDF:JBL Fuse Passive Dual Subwoofer Installation Guide  & troubleshooting 8

References

FAQ


Setting up JBL Fuse Passive Dual Subwoofer Installation Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using JBL Fuse Passive Dual Subwoofer Installation Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is JBL Fuse Passive Dual Subwoofer Installation Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for JBL Fuse Passive Dual Subwoofer Installation Guide

All symbols, colors and codes for JBL Fuse Passive Dual Subwoofer Installation Guide are explained in this instruction manual. You can find everything you need and moree