JBL Xtreme2 Manual

JBL Xtreme2 Manual & troubleshooting

JBL Xtreme2 Manual  & troubleshooting 7

JBL Xtreme2 Manual

 

1. What’s in the box
JBL Xtreme2 Manual  & troubleshooting 8

 

2. Buttons
JBL Xtreme2 Manual  & troubleshooting 9

 

3. Connections
JBL Xtreme2 Manual  & troubleshooting 10

 

4. Bluetooth®
1. Bluetooth connection
JBL Xtreme2 Manual  & troubleshooting 11

 

2. Music control

JBL Xtreme2 Manual  & troubleshooting 12

 

3. Speakerphone
JBL Xtreme2 Manual  & troubleshooting 13

 

5. Voice assistant
Tap “Voice Assistant” in the JBL Connect app, to make the “ ” button as the activation key of Siri or Google Now on your phone.

JBL Xtreme2 Manual  & troubleshooting 14

Press the “|>” button on the speaker to activate Siri or Google Now on your phone.
Please make sure the Siri or Google Now is enabled on your phone.

JBL Xtreme2 Manual  & troubleshooting 15

6. JBL Connect+

Wirelessly links more than 100 pcs JBL Connect+ compatible speakers together.

Play music on one of your JBL speakers and then press the JBL Connect+ button on all desired speakers to start pairing. All the other JBL speakers will play same music from the music source.

JBL Xtreme2 Manual  & troubleshooting 16

Download the JBL Connect app for the following features: stereo setup, firmware upgrade, and device renaming.

JBL Xtreme2 Manual  & troubleshooting 17

7. LED Behavior

JBL Xtreme2 Manual  & troubleshooting 18

 

8. Warning
JBL Xtreme2 Manual  & troubleshooting 19

JBL Xtreme 2 is IPX7 waterproof.

IMPORTANT: To ensure that the JBL Xtreme 2 is waterproof, please remove all cable connections and tightly close the cap; exposing the JBL Xtreme 2 to liquids without doing so may result in permanent damage to the speaker. And do not expose JBL Xtreme 2 to water while charging, as doing so may result in permanent damage to the speaker or power source.

IPX7 waterproof is defined as the speaker can be immersed in water up to 1m for up to 30 minutes.

If the speaker will not be used for a long period of time, please recharge the battery at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.

9. Specifications

• Bluetooth® version: 4.2
• Support: A2DP V1.3, AVRCP V1.6, HFP V1.6, HSP V1.2
• Transducer: Woofer 2 x 2.75 inch
• Tweeter: 2 x 20 mm
• Rated power: 2 x 20W RMS Bi-amp (AC mode)
• Frequency response: 55Hz–20kHz
• Signal-to-noise ratio: >80dB
• Power supply: 19V 3A
• Battery type: Lithium-ion Polymer 36Wh (Equivalent to 3.7V10000mAh)
• Battery charge time: 3.5hours
• Music play time: up to 15 hours (varies by volume level and audio content)
• USB charge out: 5V / 2A (maximum)
• Bluetooth® transmitter power: 0-12.5 dBm
• Bluetooth® transmitter frequency range:
2.402 – 2.480 GHz
• Bluetooth® transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
• Dimension (H x W x D): 136 x 288 x 132 mm
• Weight: 2393g

JBL Xtreme2 Manual  & troubleshooting 20

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

JBL Xtreme2 Manual  & troubleshooting 21

Questions about your JBL Xtreme2? Post in the comments!
Download JBL Xtreme2 Manual [PDF]

FAQ


Setting up JBL Xtreme2 Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using JBL Xtreme2 Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is JBL Xtreme2 Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for JBL Xtreme2 Manual

All symbols, colors and codes for JBL Xtreme2 Manual are explained in this instruction manual. You can find everything you need and moree