JOHN LEWIS Alba Slatted Chair User Guide

JOHN LEWIS Alba Slatted Chair User Guide & troubleshooting

JOHN LEWIS Alba Slatted Chair User Guide
JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 1

Welcome

Thank you for purchasing the Alba slatted chair. Please read the instructions and warnings carefully before use, to ensure safe and satisfactory operation of this product. At John Lewis, we are committed to making great products possible. From our in-house Design Team, to our Buyers, we work together to bring great design to life. Our expert Product Technologists work collaboratively with our buyers and supplier to assure the legality, safety and quality of the product we sell. We are all committed to designing and developing products to the highest industry standards. We hope you are happy with our product and wellcome any feedback or comments you may have.

(The John Lewis Team)
JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 2

Important safety information

Warnings

  • JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 3Keep small parts out of reach of children.
  • JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 4 Ensure the product is fully assembled as illustrated before use.

Do’s

  • JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 5 Check the pack and make sure you have all the parts listed.
  • JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 6 Check all screws or bolts are tightened and inspect regularly

Don’ts

  • JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 7 Do not over tighten screws or bolts.
  • JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 8 Do not stand on the product.
  • JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 9 Do not use power tools to construct as over tightening and panel failure may occur.

JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 10
JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 11
JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 12
JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 13
JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 14
JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 15

Care guide

Care and Maintenance

Wood Furniture
Wood displays different grain patterns depending on which way they are cut – for example, the ‘medullary ray’ which can appear on oak furniture is a mark of good quality timber – these are just characteristics of the natural beauty of the wood. Wood veneers also allow distinctive patterns to be created on some surfaces, such as table tops and drawer fronts by the way slivers are arranged.

All timber and veneer surfaces will change colour and mellow over time. New furniture will initially vary in shade from items that have been previously purchased.

How to care for your wood furniture
Dust with a clean, dry lint free cloth. Frequent dusting will remove abrasive build up, which can damage the finish over time.

Spray polishes are best avoided as they contain silicones which may spoil the furniture’s surface when building up over time.

Make sure all surfaces are protected from heat and liquids by mats and coasters. Wipe up spills immediately and ensure that a mat or pad is placed under paper if you are writing. Our furniture will endure most temperatures in the home but it is best to avoid placing furniture next to heat sources such as radiators or fires. Be particularly careful with solid wood as the lack of humidity caused by home heating can cause damage such as warping.

WARNING

Never drag furniture when moving it. Always lift it. Periodically check all fixings to ensure none have come loose. Re-tighten when necessary. Please take care when handling or moving the furniture as careless handling may cause damage or injury. Furniture can be dangerous if incorrectly assembled. Assembly should be carried out by a competent person. No liability will be accepted for damage or injury caused by incorrectly installed or assembled furniture. It is recommended that before moving a heavy object to a new location it is completely dis-assembled to avoid personal injury or damage to the furniture. Please be careful to retain all fittings when doing this. ( For fully or partial assemble items ).

Never tilt the chair.
Ensure the chair is always placed firmly on the ground. Regularly check leg attachment and retighten screws as necessary. Do not use chair if legs are unstable. Please check fixings and tighten as required.

  • Retain these instructions for future reference.

Your feedback is very important to us and we would love to hear your comments on your new furniture. Please visit our website to leave a review. Thank you.

John Lewis Partnership 171 Victoria Street London SW1E 5NN johnlewis.com

JOHN LEWIS Alba Slatted Chair User Guide  & troubleshooting 16

 

FAQ


Setting up JOHN LEWIS Alba Slatted Chair User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using JOHN LEWIS Alba Slatted Chair User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is JOHN LEWIS Alba Slatted Chair User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for JOHN LEWIS Alba Slatted Chair User Guide

All symbols, colors and codes for JOHN LEWIS Alba Slatted Chair User Guide are explained in this instruction manual. You can find everything you need and moree