JOHN LEWIS Bubble Solar Stake User Guide

JOHN LEWIS Bubble Solar Stake User Guide & troubleshooting

JOHN LEWIS Bubble Solar Stake User Guide
JOHN LEWIS Bubble Solar Stake User Guide  & troubleshooting 1

JOHN LEWIS Bubble Solar Stake User Guide  & troubleshooting 2

LED Information

  • Integrated LED
  • 4 x 0.06 Watt energy efficient LED
  • 0.20 Lumens output
  • LED non-replaceable

Specification

  • Max power: 0.24W
  • Voltage: 1.2V 1 x Rechargeable AA 500mAh Ni-MH
  • IP rating: 44
  • Weight: 0.32Kg

JOHN LEWIS Bubble Solar Stake User Guide  & troubleshooting 3
Please retain these instructions for future reference.

This symbol JOHN LEWIS Bubble Solar Stake User Guide  & troubleshooting 4 indicates that this product should not be treated as normal household waste and it should be recycled. John Lewis does not operate instore take back, but as members of the Distributer Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
Johnlewis.com
Made in China

Thank you for purchasing these Solar bubble stakes. Please read the instructions carefully before use to ensure safe and satisfactory operations of this product.

Warning!

  • This light set is for temporary outdoor use.
  • Contains small parts (choking hazard), Keep away from young children and pets to prevent injury or harm.
  • Do not connect the light set electrically to any other light set.
  • If required, only replace the rechargeable battery with recommended type supplied. (1 x 1. 2V Rechargeable AA 500mAh Ni-MH)
  • This product contains a rechargeable battery. Do not dispose of this product in household waste or a fire, batteries may explode or leak.

Parts list

No.

Parts List Qty

A

JOHN LEWIS Bubble Solar Stake User Guide  & troubleshooting 5

1

B

JOHN LEWIS Bubble Solar Stake User Guide  & troubleshooting 6

5

Diagram 1

JOHN LEWIS Bubble Solar Stake User Guide  & troubleshooting 7

Slot the cable in the cut outs on the stake

JOHN LEWIS Bubble Solar Stake User Guide  & troubleshooting 8

Assembly

Carefully unpack the carton, make sure all parts are present before assembly.

  1. Step 1
    JOHN LEWIS Bubble Solar Stake User Guide  & troubleshooting 9
    Connect the solar panel to the spike “B”. To avoid damaging the solar panel, install the ground spike into soft ground and then slide the solar panel onto the spike.
  2. Step 2
    JOHN LEWIS Bubble Solar Stake User Guide  & troubleshooting 10
    Install the solar panel in direct sunlight and where it will be exposed for the longest time. Don’t install the solar panel where shadows from buildings or trees etc. will fall as this will reduce charging performance. Don’t install the solar panel where artificial or street lighting will fall on the panel.
  3. Step 3
    JOHN LEWIS Bubble Solar Stake User Guide  & troubleshooting 11
    Taking step 2 into consideration for best placement location, install the 4 LED sticks and solar panel into soft ground. Consider also a location that will not cause a trip hazard or obstruction to people or pets. You will find the spikes inside the bottom part of the stick. Please remove these and reinsert in reverse with the pointed end on the outside (take care not to trap the cables during this assembly step – refer to diagram 1).
  4. Step 4
    JOHN LEWIS Bubble Solar Stake User Guide  & troubleshooting 12
    Before using the light set for the first time, the batteries will need to be fully charged. Allow 2 full days of charging before use. Set the power switch to “ON” and allow a full days charge in daylight. Switch “OFF” at dusk. Repeat the process the following morning. For operation, switch the now charged light set to “ON” for continuous operation. The light set will now automatically switch on at dusk and recharge during the day

Care instructions

We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish.

 

References

FAQ


Setting up JOHN LEWIS Bubble Solar Stake User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using JOHN LEWIS Bubble Solar Stake User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is JOHN LEWIS Bubble Solar Stake User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for JOHN LEWIS Bubble Solar Stake User Guide

All symbols, colors and codes for JOHN LEWIS Bubble Solar Stake User Guide are explained in this instruction manual. You can find everything you need and moree