John Lewis Ovals LED Wall Light User Manual

John Lewis Ovals LED Wall Light User Manual & troubleshooting

John Lewis Ovals LED Wall Light User Manual

John Lewis Ovals LED Wall Light User Manual  & troubleshooting 1

Thank you for purchasing this Ovals LED wall light. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.

Warnings!
This is a Class II product and must NOT be earthed. For your safety, this product must be installed in accordance with local Building Regulations. If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self-declaration scheme. Further information is available online or from your Local Authority To prevent electric shock switch off at mains supply before installing or maintaining this fitting. Ensure other persons cannot restore the electrical supply without your knowledge. This light fitting should be connected to a 5 amp fused circuit. This product is suitable for installation on surfaces with normal flammability e.g. wood, plasterboard, masonry. It is not suitable for use on highly flammable surfaces (e.g. polystyrene, textiles). Ensure the correct fixings are used for the installation surface. For your safety, always switch off the supply before cleaning or adjusting. This product is not dimmable.

Parts list

John Lewis Ovals LED Wall Light User Manual  & troubleshooting 2

Assembly

Refer to assembly drawing below. Carefully unpack the carton, making sure all the parts are present before assembly.

Step 1
Before removing the existing fitting, carefully note the position of each set of wires.

John Lewis Ovals LED Wall Light User Manual  & troubleshooting 3

Step 2
Refer to Figure. 1 Remove the fixing bracket (A) from the fitting by removing side screws (B).

John Lewis Ovals LED Wall Light User Manual  & troubleshooting 4

Step 3
Refer to Figure 2. Attach the fixing bracket to the wall using the screws provided. Make care to avoid damaging any concealed wiring and pipes.

Step 4
Having identified the household wiring from your existing light fitting, connect to the connection block inside the product as shown. When completed, ensure that there are no bare or loose strands of wire exposed.

John Lewis Ovals LED Wall Light User Manual  & troubleshooting 5
Check that
You have correctly identified the house wires. The connections are tight. No loose strands have been left out of the connection block.

John Lewis Ovals LED Wall Light User Manual  & troubleshooting 6

Step 5
Refer to Figure 3. Attach the product to the wall. This product has “L” shaped fixing slots (C) to allow easy attachment to the fixing bracket. Locate the “L” slots around the small screws (B) on the fixing bracket (A) Slide the wall back to attach the product to the bracket. Tighten the screws to secure. Take care not to trap any wiring.

Step 6
Replace fuse or circuit breaker and switch on. Your light is now ready for use.

Care instructions

We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage the finish.

Recommended bulb

1 x 20 Watt energy efficient LED

This product contains a non-replaceable LED module. If the LEDs become damaged then the whole product must be replaced. When moving or cleaning, always switch off at the mains and allow the LEDs to cool before handling.

Specifications

Max. power: 20W
Voltage: 220-240V~50Hz
IP rating: IP20
Weight: 0.72kg
850 lumen output
Color temperature: Warm white (3000K)

John Lewis Ovals LED Wall Light User Manual  & troubleshooting 7
Please retain these instructions for future reference.

This symbol John Lewis Ovals LED Wall Light User Manual  & troubleshooting 8 indicates that this product should not be treated as normal household waste and it should be recycled. John Lewis do not operate instore take back, but as members of the Distributor Trade Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.

We have taken great care to ensure that this product reaches you in perfect condition. However, should any parts be damaged or missing please contact the Product Helpline on (01202) 690945.

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com

Made in China

References

FAQ


Setting up John Lewis Ovals LED Wall Light User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using John Lewis Ovals LED Wall Light User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is John Lewis Ovals LED Wall Light User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for John Lewis Ovals LED Wall Light User Manual

All symbols, colors and codes for John Lewis Ovals LED Wall Light User Manual are explained in this instruction manual. You can find everything you need and moree