joie Bold R Booster Car Seat Instruction Manual

joie Bold R Booster Car Seat Instruction Manual & troubleshooting

joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 1

1/2/3(9–36kg)bold R
booster
Instruction Manual
joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 2

Welcome to Joie ™
Congratulations on becoming part of the Joie family! We are so excited to be part of your journey with your little one. While traveling with Joie bold™ R
booster you are using a high quality, fully certified safety Group 1/2/3 booster. This product is suitable for use with children weighing 9-36kg (approximately 1– 12 years). Please carefully read this manual and follow each step to ensure a comfortable ride and best protection for your child.

Please confirm
This booster is approved to UN ECE regulation No. 44, 04 series of amendments. This booster can be installed using a 3 point retractable adult seat belt approved to UN ECE regulation No. 16 or other equivalent standards.

Booster
! IMPORTANT: KEEP FOR FUTURE REFERENCE. PLEASE READ 
CAREFULLY.
Please keep the instruction manual in the storage compartment at the bot- tom of the booster as right figure. joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 3

Parts List

Make sure all parts are available before assembly. If any part is missing, please contact local retailer. No tools are required for assembly.

1     Head Support   9     Shoulder Strap
       Adjustment Lever 10     Harness Buckle
2     Head Support 11     Cupholder
3     Lower Back Support 12     Top Tether Strap
4     Insert 13     Tether Strap Adjuster
5     Adjustment Webbing 14     Tether Hook
6     Recline Adjustment 15     Pocket
       Button 16     Isosafe Connector
7     Isosafe Releasing Button 17     ISOFIX Guides
8     Side Impact Shield

joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 4

WARNING
! Do take care to locate and install the booster so that it is not liable to become trapped by a moveable seat or in a door of the vehicle.
! This booster is designed ONLY for child weighing
9-36kg (approximately 1 – 12 years or under).
! Make sure that the straps holding the restraint to the vehicle should be tight and any straps restraining the child should be adjusted to the child’s body. Check to make sure that the straps are not twisted.
! After your child is placed in this booster, the safety belt must be used correctly, and ensure that any lap strap is worn low down, so that the pelvis is firmly engaged.
! Replace the booster after an accident of any kind.
An accident can cause unseen damage to the booster.
! NEVER use a booster if it has damaged or missing parts. DO NOT use a cut, frayed or damaged vehicle seat belt
! NEVER leave your child unattended with this booster.
! Failure to properly use this booster increases the risk of serious injury or death in a sharp turn, sudden stop or crash.
! DO NOT use this booster without the soft goods.
! The soft goods should not be replaced with any besides the ones recommended by the manufac- turer, because the soft goods constitute an inte- gral part of the booster performance.
! DO NOT use any load bearing contact points other than those described in the instructions and marked on the booster.
! NEVER leave luggage or other objects unsecured in a vehicle, they are liable to cause injuries in the event of a collision.
! DO NOT use in any configuration not shown in the instructions.
! NEVER give this booster to someone else without also giving them this manual.
! NEVER leave a booster unsecured in your vehicle.
An unsecured booster can be thrown around and may injure occupants in a sharp turn, sudden stop or crash. Remove it or make sure that it is securely
belted in the vehicle.
! DO NOT modify your booster or use any accessories or parts supplied by other manufacturers.
! NEVER use a second-hand booster or a booster whose history you do not know.
! DO NOT face your booster toward the rear of the vehicle.
! To avoid burns, never put hot liquids in your booster’s cupholder.
! DO NOT have your child in swaddled clothes when using this booster in forward-facing mode, because this may prevent your child from being properly and securely fastened by the shoulder harnesses and the harnesses between thighs.
! The booster can become very hot if left in the sun.
Contact with these parts can burn your child’s skin. Always touch the surface of any metal or plastic parts before putting your child in the booster.
! According to accident statistics, children are safer when properly restrained in rear vehicle seating positions, rather than front seating positions. For a vehicle with a front passenger air bag, refer to your vehicle owner’s manual as well as these instruc- tions for a booster installation.

Emergency

In case of emergency or accidents, it is most important to have your child taken care of with first aid and medical treatment immediately.

Product Information

Read all the instructions in this manual before using this product. If in doubt, consult either the booster manufacturer or the retailer.

  1. This booster is a ‘Semi-Universal’ child restraint. It is approved to UN ECE regulation No. 44, 04 series of amendments for general use in vehicles fitted with ISOFIX anchorages systems.
  2. Seat positions in other cars may also be suitable to accept the booster. Please refer to our vehicle fitting list (on-product as well as online at our website).

Product Bold R
Suitable for Child weighing 9-36kg
(approximately 1 – 12 years)
Mass Group Group 1/2/3
Materials Plastics, metal, fabrics
Patent No. Patents pending

Choose the Installation Modejoie Bold R Booster Car Seat Instruction Manual  & troubleshooting 5

Concerns on Installation

see images 1 – 4joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 6

Use Cupholder

see images 5joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 7

Height Adjustment – for Head Support

see images 6

  1. Please adjust the head support to proper height according to the child’s height.
  2. Squeeze the head support adjustment lever, meanwhile pull up or push down the head support until it snaps into one of the 11 positions.
    ! Before adjusting the head support height have your child lean forward slightly.

joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 8

Recline Adjustment

see images 7 – 8

  1. Squeeze the recline adjustment button 7 , to adjust the booster to the proper position. The recline angles are shown as 8 .
  2. There are 3 recline positions for forward-facing mode.

joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 9

Use Side Impact Shield

see images 9 – 10
! Make sure to open the side impact protection shield for more side-impact safety. 9
The side impact shield will be locked in the permanently open position after it is opened for maximum side-impact safety. 10joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 10

Use Insert

see images 11 – 16

  1. Unlock the buckle of the harnesses by pressing the red button. 11
    joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 11! To ensure the best protection for the child, always use the small insert when the child’s shoulder height is lower than the headrest bottom.
  2. Engage the buckle. Please refer to 14
    joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 12
  3. When the child’s shoulders are higher than the headrest bottom without the support from the small insert, remove the lower body insert 16 , and use upper body insert only until the child does not fit comfortably.
    ! This may vary depending on the region.

Use Top Tether

see images 17 – 22

  1.  To extend top tether for use, press the button on the tether adjusted pull to lengthen. 19
    joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 13
  2. Connect the tether hook securely to the anchorage fitting. 20
    ! Use top tether for installation if vehicle is equipped with a tether anchorage fitting and vehicle requirements are met (see vehicle owner’s manual).
    ! When not in use, top tether must be properly stored. To make sure the top tether is properly stored away, remove any slack in strap to avoid the top tether swinging around when the vehicle is in progress.joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 14

Use Isosafe System

see images 23 – 29

  1. If required attach the plastic guides onto the vehicle ISOFIXbars. 23
  2. Extend the Isosafe connectors by depressing on the release button 24 whilst pulling on the connector. 25

joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 15

! Make sure that both Isosafe connectors are securely attached to their ISOFIX anchor points. The colors of the indicators on both Isosafe connectors should be completely green. 26
! Press the Isosafe connectors button 24 and push the base back against the vehicle seat until tight.joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 16

Removing the base

  1. To remove base from the vehicle press the release button 24 and pull the base back from the seat. 27
  2.  Then press 28 -1 and pull back  on the Isosafe connector. 28 -2
  3. For transporting base, press Isosafe connectors button 24  and move back Isosafe connector so it is folded completely. 29

joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 17

GROUP 1 (9-18kg) &
GROUP 2 (15-25kg)
With Isosafe system + 3-point-belt + top tether + harness buckle
see images 30 – 34

  1. Press the webbing adjustment button, while pulling out the shoulder harnesses to the proper length. 30
  2. Press the red button to disengage the buckle. 31

joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 18joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 19joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 20

3. Make sure that both Isosafe connectors are securely attached to their ISOFIX anchor points. The colors of the indicators on both Isosafe connectors should be completely green. 34 -1
4. The booster can not be used if the vehicle safety belt buckle (female buckle end) is too long to anchor the booster securely. 34 -2&34 -3
5. Make sure that tether hook are securely attached to the anchorage fitting. The colors of the indicators on the tether strap adjuster should be completely green. 34 -4 6. To ensure the correct head support height is obtained, the bottom of the headrest MUST be even with the top of the child’s shoulders as shown in 34 -5.
7. Pull down the adjustment webbing and adjust it to the  proper length so that your child is snugly secured. Make sure the space between the child and the shoulder harness is about the thickness of one hand. 34 -6

GROUP 2 (15-25kg) &
GROUP 3 (22-36kg)
With Isosafe system + 3-point-belt
With Isosafe system + 3-point-belt + top tether
see images 35 – 44 ! Store the shoulder strap cover, crotch belt cover, buckle and harness straps in a safe place.

joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 21joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 22

For installation with Isosafe system + 3-point-beltjoie Bold R Booster Car Seat Instruction Manual  & troubleshooting 23

  1. Make sure that both Isosafe connectors are securely attached to their ISOFIX anchor points. The colors of the indicators on both Isosafe connectors should be completely green. 41 -1
  2. The booster can not be used if the vehicle safety belt buckle (female buckle end) is too long to anchor the booster securely. 41 -2&41 -3
  3. Position shoulder belt through the shoulder belt guide shown in 41 -4.
  4. It is very important to ensure that any lap strap is worn low down, so that the pelvis is firmly engaged. The booste  is shown as 41 .

For installation with Isosafe system + 3-point-belt + top tetherjoie Bold R Booster Car Seat Instruction Manual  & troubleshooting 24

  1.  Make sure that both Isosafe connectors are securely attached to their ISOFIX anchor points. The colors of the indicators on both connectors should be completely green 42 -1
  2. The booster can not be used if the vehicle safety belt buckle (female buckle end) is too long to anchor the child restraint securely. 42 -2&42 -3
  3. Make sure that the tether hook are securely attached to the anchorage fitting. The colors of the indicators on the tether strap adjuster should be completely green. 42 -4
  4. Position shoulder belt through the shoulder belt guide shown in 42 -5
  5.  It is very important to ensure that any lap strap is wor low down, so that the pelvis is firmly engaged. The boosteis shown as 42 .

joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 25

To ensure the correct head support height is obtained, the bottom of the headrest MUST be even with the top of child’s shoulders as shown in 43 and the shoulder belt must be positioned in the red zone as shown in 44 .

Detach Soft Goods

see images 45 – 49
! Please refer 35 – 40 to remove the shoulder strap cover, crotch belt cover, buckle and harness straps, and keep them properly.
! To refit the seat pad simply reverse the steps above.

joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 26

joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 27

Care and Maintenance

! Please wash the soft goods and inner padding with cold water under 30°C.
! Do not iron the soft goods.
! Do not bleach or dry clean the soft goods.
! Do not use undiluted neutral detergent gasoline or another organic solvent to wash the booster. It may cause damage to the booster.
! Do not twist the soft goods and inner padding to dry with great force. It may leave the soft goods and inner padding with wrinkles.
! Please hang dry the soft goods and inner padding in the shade.
! Please remove the booster from the vehicle seat if not in use for a long period of time. Put the booster in a cool, dry place and somewhere your child cannot access it.joie Bold R Booster Car Seat Instruction Manual  & troubleshooting 28

Allison GmbH
Adam-Opel-Straße 21 67227
Frankenthal
IM-000351H
Share the joy at joiebaby.com

FAQ


Setting up joie Bold R Booster Car Seat Instruction Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using joie Bold R Booster Car Seat Instruction Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is joie Bold R Booster Car Seat Instruction Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for joie Bold R Booster Car Seat Instruction Manual

All symbols, colors and codes for joie Bold R Booster Car Seat Instruction Manual are explained in this instruction manual. You can find everything you need and moree