KIA XR-4978 Telluride Smart Key 2020+ 5Buttons Instructions

KIA XR-4978 Telluride Smart Key 2020+ 5Buttons Instructions & troubleshooting

KIA XR-4978 Telluride Smart Key 2020+ 5Buttons Instructions  & troubleshooting 1

KIA XR-4978 Telluride Smart Key 2020+ 5Buttons

KIA XR-4978 Telluride Smart Key 2020+ 5Buttons Instructions  & troubleshooting 2

Description of manufacturer

Trade mark : DNKR

Name and address of manufacturer

  • Name : DENSO KOREA CORPORATION
  • Address : Cheomdan Industry 3, Masanhappo-gu, Changwon-si,

Name and address of applicant

  • Name : DENSO KOREA CORPORATION
  • Address : Cheomdan Industry 3, Masanhappo-gu, Changwon-si,

Technical description of Smart Key FOB

Type

Model  : FD00840

Specifications of Electronic Key

  • Nominal frequency: 433.92MHz
  • Oscillator frequency (IC clock) : 16MHz
  • Oscillator frequency (RF clock) : 27.6MHz
  • Type of modulation: FSK/F1D
  • Power Supply : 3 VDC
  • Nominal supply voltage : One lithium battery
  • Type of Battery : Built-in type (Fixed)
  • Antenna

Outline of Smart Key FOB

Smart Key FOB is mainly used for locking or unlocking the doors of vehicles. Smart Key FOB detects signals when it reaches the vicinity of vehicle, and sends signals using radiofrequency. Also, Smart Key FOB sends a radio wave signal while a button is pushed. When the button is released, the radio wave signal is automatically off within 0.392 seconds. When the button is depressed continuously, Smart Key FOB sends a signal for a predetermined constant time.

KIA XR-4978 Telluride Smart Key 2020+ 5Buttons Instructions  & troubleshooting 3

This product sends a signal when the following buttons are pushed.

KIA XR-4978 Telluride Smart Key 2020+ 5Buttons Instructions  & troubleshooting 4

FCC Part 15.19

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. FCC and IC RF Radiation Exposure Statement: This equipment complies with FCC and IC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

  1.  This device may not cause interference.
  2.  This device must accept any interference, including interference that may cause undesired operation of the device.

FAQ


Setting up KIA XR-4978 Telluride Smart Key 2020+ 5Buttons Instructions is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using KIA XR-4978 Telluride Smart Key 2020+ 5Buttons Instructions is simple by using this manual. Follow the instructions one by one and everything will be fine

Is KIA XR-4978 Telluride Smart Key 2020+ 5Buttons Instructions stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for KIA XR-4978 Telluride Smart Key 2020+ 5Buttons Instructions

All symbols, colors and codes for KIA XR-4978 Telluride Smart Key 2020+ 5Buttons Instructions are explained in this instruction manual. You can find everything you need and moree