KRAMER HDMI Distributor User Guide

KRAMER HDMI Distributor User Guide & troubleshooting

KRAMER HDMI Distributor User Guide  & troubleshooting 1

KRAMER HDMI Distributor User Guide  & troubleshooting 2VM-4H2 Quick Start Guide
This guide helps you install and use your VM-4H2 for the first time.
Go to www.kramerav.com/downloads/VM-4H2 to download the latest user manual and check if the firmware
upgrades are available.

Kramer-USER MANUAL [PDF]

Step 1: Check what’s in the box

✔ VM-4H2 4K HDMI 2.0 1:4 DA
✔ 1 Power supply (5V DC)
✔ 4 Rubber feet
✔ 1 Quick start guide

Step 2: Mount VM-4H2

Install VM-4H2 using one of the following methods:
KRAMER HDMI Distributor User Guide  & troubleshooting 3

KRAMER HDMI Distributor User Guide  & troubleshooting 4

  • Ensure that the environment (e.g., maximum ambient temperature & airflow) is compatible with the device.
  • Avoid uneven mechanical loading.
  • Appropriate consideration of equipment nameplate ratings should be used for avoiding the overloading of the circuits.
  • Reliable earthing of rack-mounted equipment should be maintained.
  • The maximum mounting height for the device is 2 meters.

Step 3: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VM-4H2.

KRAMER HDMI Distributor User Guide  & troubleshooting 5

KRAMER HDMI Distributor User Guide  & troubleshooting 6 To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VM-4H2.
Using third-party cables may cause damage!

Step 4: Connect the power

Connect the power cord to VM-4H2 and plug it into the mains electricity.
KRAMER HDMI Distributor User Guide  & troubleshooting 7 Safety Instructions (See www.kramerav.com for updated safety information)
Caution:

  • For products with relay terminals and GPIO ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
  • There are no operator serviceable parts inside the unit.
    Warning:
  • Use only the power cord that is supplied with the unit.
  • Disconnect the power and unplug the unit from the wall before installing.

Step 5: Set DIP-switches

KRAMER HDMI Distributor User Guide  & troubleshooting 8

Set the DIP-switches according to your needs using the following table:

Programming mode  HDCP Input (MAC mode)  Force RGB  Lock Default EDID
DIP 1 2 3 4
OFF (up) Normal mode HDCP enabled Force RGB EDID not locked
ON (down) Enable programming HDCP disabled Normal mode EDID locked

www.kramerav.com

References

FAQ


Setting up KRAMER HDMI Distributor User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using KRAMER HDMI Distributor User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is KRAMER HDMI Distributor User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for KRAMER HDMI Distributor User Guide

All symbols, colors and codes for KRAMER HDMI Distributor User Guide are explained in this instruction manual. You can find everything you need and moree