KRAMER VM-2H2 Distribution Amplifier User Guide

KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 0

KRAMER

 

KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 1
Scan for full manual

VM-2H2 Quick Start Guide

This guide helps you install and use your VM-2H2 for the first time.

Go to www.kramerav.com/downloads/VM-2H2 to download the latest user manual and check if firmware upgrades are available.


Step 1: Check what’s in the box

KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 2 VM-2H2 4K HDMI 2.0 1:2 DA      KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 3  4 Rubber feet
KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 4  1 Power supply (5V DC)                 KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 5  1 Quick start guide


Step 2: Mount VM-2H2

Install VM-2H2 using one of the following methods:

KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 6

KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 7

  • Ensure that the environment (e.g., maximum ambient temperature & air flow) is compatible for the device.
  • Avoid uneven mechanical loading.
  • Appropriate consideration of equipment nameplate ratings should be used for avoiding overloading of the circuits.
  • Reliable earthing of rack-mounted equipment should be maintained.
  • Maximum mounting height for the device is 2 meters.

Step 3: Connect inputs and outputs

Always switch OFF the power on each device before connecting it to your VM-2H2.

KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 8

KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 9

To achieve specified extension distances, use the recommended Kramer cables available at www.kramerav.com/product/VM-2H2. Using third-party cables may cause damage!

VM-2H2 Quick Start        KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 10           KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 11

P/N: 2900–301097QS     Rev: 3


Step 4: Connect power

Connect the power cord to VM-2H2 and plug it into the mains electricity.

KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 12

Safety Instructions (See www.kramerav.com for updated safety information)
Caution:
For products with relay terminals and GPIO ports, please refer to the permitted rating for an external connection, located next to the terminal or in the User Manual.
There are no operator serviceable parts inside the unit.
Warning:
Use only the power cord that is supplied with the unit.
Disconnect the power and unplug the unit from the wall before installing.


Step 5: Set DIP-switches

KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 13

Set the DIP-switches according to your needs using the following table:

Programming mode HDCP Input (MAC mode) Force RGB Lock Default EDID
DIP

1

2 3

4

OFF (up) Normal mode HDCP enabled Force RGB EDID not locked
ON (down) Enable programming HDCP disabled Normal mode EDID locked

WWW.KRAMERAV.COM                                       KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 14       KRAMER VM-2H2 Distribution Amplifier User Guide  & troubleshooting 15

References

FAQ


Setting up KRAMER VM-2H2 Distribution Amplifier User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using KRAMER VM-2H2 Distribution Amplifier User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is KRAMER VM-2H2 Distribution Amplifier User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for KRAMER VM-2H2 Distribution Amplifier User Guide

All symbols, colors and codes for KRAMER VM-2H2 Distribution Amplifier User Guide are explained in this instruction manual. You can find everything you need and moree