LOFTEK SLR0601S Solar Fence Light User Manual

LOFTEK SLR0601S Solar Fence Light User Manual & troubleshooting

LOFTEK SLR0601S Solar Fence Light User Manual  & troubleshooting 1

LOFTEK SLR0601S Solar Fence Light

LOFTEK SLR0601S Solar Fence Light User Manual  & troubleshooting 2

Automatic Lighting

The solar fence light is powered by solar batteries, it will automatically turn on at night and turn off at dawn or in bright places. It only takes about 6-8 hours to fully charge in the direct sunlight and provides 10-12 hours of lighting at night.
Energy-saving and Eco-friendly. It is an ideal choice for illuminating and decorating your fence, garden, walkway, pathway, and deck.

CONSTRUCTIONLOFTEK SLR0601S Solar Fence Light User Manual  & troubleshooting 3

  1. Solar Panel
  2. Switch
  3. Screw Hole
  4. LED Bead

INSTALLATION

Step I: Turn on the Light
Press the switch at the bottom to turn on the solar light.LOFTEK SLR0601S Solar Fence Light User Manual  & troubleshooting 4

Step 2: Install the item under the place where the sunlight exposes directly.
We recommend installing the item at a height of 3 feet on the fence or wall and keep the solar panel under ideal bright sunlight to make sure it receives at least 6-8 hours of direct sunlight to fully charge the battery.LOFTEK SLR0601S Solar Fence Light User Manual  & troubleshooting 5

Step 3: Install the light and hang it
Use a tool to drill one hole in the desired location. Gently hammer the pillar hinges into the hole and fasten the screw into the pillar hinges. Then hang the lamp on the screw.LOFTEK SLR0601S Solar Fence Light User Manual  & troubleshooting 6

Technical Parameters

Model : SLR0601S
Product name: Solar Fence Light
Size : 4.6X2.5X2 inch
Material : Plastic
Ni-MH Battery : 1.2V NI-MH AA600mAh(included)
Solar Panel : 0.4W
LED bead s: l pc
IP Rating : IP54

Product charing and working temperature

Charging Tem pera ture : 0 °C- +5 5°C
Working Temperature: – l0 °C- + 55°C
Charging Time : 6-8 hours
Working Time : 10-12 hours

Packing list

  • Solar Fence Lamp
  • Screw
  • Expansion Pillar-hinge
  • User Manual

Warm Tips

  1. Before the first use, please make sure the solar light is charged under sunlight for 8-12 hours.
  2. The solar light needs to be placed some­where which can get direct sunlight regularly.
  3. Solar panel surfaces must be kept clean to absorb sunlight effectively.
  4. The installation location must be far from other light sources, otherwise, it may cause the light not to work.
  5. Please make sure to turn on the switch before use.
  6. On winter or rainy days, insufficient sun absorption will directly affect the brightness and working hours.

www.loftek.us

WARRANTY AND CUSTOMER SERVICE

  • 30-Day Money-Back Guarantee;
  • 2-Year Free Replacement for Product Quality Issue;
  • Lifetime Customer Support.

Customers’ satisfaction means the world to us! If you encounter any problems, please do not hesitate to contact us at [email protected] for assistance.

LOFTEK SLR0601S Solar Fence Light User Manual  & troubleshooting 7

FAQ


Setting up LOFTEK SLR0601S Solar Fence Light User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using LOFTEK SLR0601S Solar Fence Light User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is LOFTEK SLR0601S Solar Fence Light User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for LOFTEK SLR0601S Solar Fence Light User Manual

All symbols, colors and codes for LOFTEK SLR0601S Solar Fence Light User Manual are explained in this instruction manual. You can find everything you need and moree