Machines Intelligent Computer Filling Machine Instructions

Machines Intelligent Computer Filling Machine Instructions & troubleshooting

Intelligent Computer Filling Machine
Instructions

Machines Intelligent Computer Filling Machine Instructions  & troubleshooting 1

Please read this user manual carefully before using this machine.

***Very Important: Before using, please remove the 3 red bolts on the bottom of the powder filler. ***

Machines Intelligent Computer Filling Machine Instructions  & troubleshooting 2

Introduction

Not suitable for steel beads, cermatic beads, wet materials. Suitable for filling Φ1.2–10mm dry and mobile materials, such as powder: flour, milk powder, coffee powder,  chemical powder and any other dry powders, also designed for filling round tea(leaf-like tea is not suitable), grains, beans, seeds, fruit, preserved fruit, spices, electronic components, diamond, small hardware, plastic beads and so on.
How to make sure whether this machine is suitable for you?
Here are several questions, if all the answers of the following questions are yes. This machine can serve you well. If you are not sure about it, please feel free to contact us.
1. Is your material Dry (will not stick to the inner wall of the filling machine)?
2. Is your material Mobile (not stick together and not hard to move)?
3. Is its diameter between Φ1.2–10mm?

Safety tips

DON’T s
1. Do not modify the machine by yourself. Except maintenance technicians, other personnel shall not decompose or modify the machine to avoid fire, electric shock, or accident.
2. Do not plug this machine to other voltage. Only AC voltage 110V is acceptable. Otherwise it may cause huge damage to the machine.
3. Do not operate in the following ways: bend the power line obligatorily, close the machine to high temperature, put very heavy loads on the machine, etc.
4. Plugs need to be completely plugged into the socket to avoid fire, electric shock or short circuit.
5. Do not use the damaged power cable or when it is wet.
6. Do not use wet hand to dial the plug.
7. In the process of work, it is prohibited to move or sway the filling machine.
8. Do not allow children close to the machine. The machine should be placed far from infants and young children to avoid accidents.
9. Do not put it in the place which is unstable, damp or near the source of fire.
10. Do not dip the machine in the water.
Must:
After you use this machine for some time, in the plug there may collect some dust, if so, please clean the plug.

Operating method

1. Before using, please remove the 3 red bolts on the bottom of the powder filler. They are long screws that can reduce the rate of damage of inner parts during transportation.  But before using, they have to be removed.
2. Plug in the power, turn on the machine. The indicator light of the computer control panel will be lit up. The machine enters the standby state automatically.
3. Pour the filling materials into the hopper. Press “Minus” or “Plus” to set the weight of filling. It will show on the first line of the LCD screen. (The second line shows the real-time weight of each filling and the third line shows the pack number it fills.)
4. After weight is set, please set the filling speed.(choose the speed according to the size of the material).
5. If everything is done. Press Start, the machine will start to work.
There is an infrared inductive head under the outlet so when you put a bag under the outlet, the filling materials will come out automatically.
6. In the process of quantitative filling, if you want to pause the process or filling materials has been used out, you need to add more in the hopper, press Stop to stop the machine.
7. To remove the material inside the machine, please press Discharge or Clear Material for more than 5 seconds, the machine will enter the state of removing materials.
8. When filling is completed, please turn off the machine.

Technical Parameters

Material of the machine: stainless steel
Weight: about 9.5kg
Working power: 25W
Working voltage: 110V/60HZ
Packing accuracy:+/-0.2g
Packing speed: 0~15 bags /min
Dimensions: 38*23*49cm

How to clean the machine?

Before or after using, if you want to clean the machine. Please first unplug the machine. Please clean the machine with a soft towel. (Please DO NOT pour water in the machine directly. ) The upper lid of the filling machine can be taken off by opening the lock shown in the attached picture. After remove the lid, the inner parts can also be sanitized.  Please also don’t forget to clean the big hopper.

Machines Intelligent Computer Filling Machine Instructions  & troubleshooting 3

tructure Diagram

Machines Intelligent Computer Filling Machine Instructions  & troubleshooting 4

FAQ


Setting up Machines Intelligent Computer Filling Machine Instructions is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Machines Intelligent Computer Filling Machine Instructions is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Machines Intelligent Computer Filling Machine Instructions stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Machines Intelligent Computer Filling Machine Instructions

All symbols, colors and codes for Machines Intelligent Computer Filling Machine Instructions are explained in this instruction manual. You can find everything you need and moree