MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 0

USER MANUAL
MUSIC ENJOYMENT FOR EVERYONE
BTX1
BLUETOOTH WIRELESS
MMCX ADAPTER CABLE
www.MEEaudio.com/BTX1

BLUETOOTH SUPPORT PAGE
Please visit the Bluetooth Support page at MEEaudio.com/Bluetooth for video setup guides and troubleshooting information.

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 1

POWERED BY

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 2MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 3

BTX1 PRODUCT OVERVIEW

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 4

STEP 1 – CHARGING

Connect the Micro-USB charging cable to any powered USB port and to the charging port of the BTX1.
The status indicator light will turn blue once the BTX1 is charged and ready for use.
Close the USB port cover completely after charging for maximum sweat resistance.

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 5

STEP 2: INSTALLING EARPIECES

Select your desired cable and attach the earpieces as shown.
Make sure to attach the cable connector marked “R” to the right earpiece and the connector marked “L” to the left earpiece.

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 6

Attach the cable by aligning the connectors with the earpieces and pushing them in until they “click”. Pull back slightly on each connector to make sure it is fitted securely.

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 7

To detach the cable, grasp the earpiece and cable connector firmly, and pull straight apart.

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 8

STEP 3: PAIRING

Press and hold the Multifunction button for about 5 seconds until you hear the headset say “Pairing” and the light flashes red and blue.

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 9

Open the Bluetooth menu on the device you wish to pair (usually located in Settings > Bluetooth). If needed, select “search for devices”, “add new device”, or “refresh”.

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 10

Select “MEE audio BTX1” and allow pairing to complete. Use “0000” if a pin is required. Visit the Bluetooth Support Page at MEEaudio.com/Bluetooth for additional Bluetooth pairing and setup information.

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 11

STEP 4: WEARING THE BTX1

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 12

Identify the right and left earpieces.

Place the cable behind your neck and route the earhooks over your ears.

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 13

Place the earpieces in your ears. Adjust each earpiece until it fits flush in your ear and the eartip seals the ear canal.

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 14

Tighten the sliding cable cinch for the most secure fit.

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 15

FUNCTIONALITY AND CONTROLS

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 16

* You may need to bring your music player application up on the screen for media playback to start
** Not all devices support this functionality

FACTORY RESET

FACTORY RESET
To perform a full reset, first put the BTX1 in standby mode (headset is powered on but not connected to any devices). Make sure to turn off Bluetooth or delete the “MEE audio BTX1” pairing from any nearby devices that have previously been paired with the BTX1.
Once in standby mode, press and hold the volume up and volume down buttons simultaneously for 2 seconds until you hear two tones. All previously paired devices will be cleared from memory and a new pairing will need to be created before the BTX1 can be used.

WARNING

WARNING
Using headphones at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at all times for your safety. Do not use while driving a car, cycling, operating machinery, or performing other activities that require hearing surrounding sounds.
Keep the device and packaging out of reach of children.

ADDITIONAL INFORMATION

FOR ADDITIONAL SUPPORT

WARRANTY

MEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty. For more information, visit MEEaudio.com/Support.

Have a question?
Email [email protected]

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 17MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 18

MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved.
Siri® is a registered trademark of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license. Other trademarks and trade names are those of their respective owners.
Qualcomm® aptX™ is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission

QUESTIONS?
WE’RE HERE TO HELP!
Phone Support: 626-965-1008 x31
Monday ~ Friday 9am to 5:30pm PST
Email Support: [email protected]
All emails are responded to within 2 business days

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual  & troubleshooting 19

MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual – Download [optimized]
MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual – Download

FAQ


Setting up MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual

All symbols, colors and codes for MEE audio BTX1 Bluetooth Wireless Mmcx Adapter Cable User Manual are explained in this instruction manual. You can find everything you need and moree