Monoprice MP Maker Pro Mk.1 Firmware Update Instructions

Monoprice MP Maker Pro Mk.1 Firmware Update Instructions & troubleshooting

Monoprice MP Maker Pro Mk.1 Firmware Update Instructions  & troubleshooting 1

Monoprice MP Maker Pro Mk.1 Firmware

Do I Need This Update?
Turn on the printer, then touch the Level button. If you see a menu with two options, as shown below and to the left, you need to update the firmware. If you see the menu blow and to the right, your printer already has the latest firmware and you do not need this update.

Monoprice MP Maker Pro Mk.1 Firmware Update Instructions  & troubleshooting 2Preparation

  1. Insert microSD™ card into a card reader on your computer. Note that the card can be no larger than 8GB in size and that it should be formatted for FAT32 with a 4096 sector size.
  2. Download the 33013_Firmware_V0.163_180720.zip file from the 33013 page on the Monoprice website.
  3. Extract the 33013_Firmware_V0.163_180720.zip file to the microSD™ card. This will install a directory named DWIN_SET and a file named IIIP D9 300-V0.163.hex in the root directory of the microSD™ card.

Motherboard Firmware Updating

  1. With the printer turned off, connect it to your PC using a USB cable.
  2. On your computer, open the Device Manager. Click next to Ports (COM & LPT, so can see all the active serial ports.
    Take note of which ports are active.Monoprice MP Maker Pro Mk.1 Firmware Update Instructions  & troubleshooting 3
  3. Turn on the printer. The computer will automatically install the basic USB drivers.Monoprice MP Maker Pro Mk.1 Firmware Update Instructions  & troubleshooting 4
  4. Look at the Ports (COM & LPT) list and identify the new entry.
  5. Launch Cura.
  6. Click the Machine menu, then click the Machine Settings… entry.
  7. Set the Serial port to the port identified in step 4 above, then set the Baudrate to 115200. Click OK to save the changes.Monoprice MP Maker Pro Mk.1 Firmware Update Instructions  & troubleshooting 5
  8. Click the Machine menu, then select the Install custom firmware… entry.
  9. Use the file browser to navigate to the microSD™ card, then select the IIIP D9 300- V0.163.hex file. It takes about a minute to complete the update process.Monoprice MP Maker Pro Mk.1 Firmware Update Instructions  & troubleshooting 6

LCD Screen Updating

  1. Turn off the printer, then turn it on its side.
  2. Remove the screws and the panel indicated in the image below and to the left to gain access to the LCD controller board.Monoprice MP Maker Pro Mk.1 Firmware Update Instructions  & troubleshooting 7
  3. Insert the microSD™ card into the card slot on the controller board, as shown in the image above and to the right.
  4. Turn on the printer. The printer will start flashing the firmware automatically. It takes about 2 minutes to update the firmware.
    When the process is complete, the LCD screen will display SD Card Process… END!Monoprice MP Maker Pro Mk.1 Firmware Update Instructions  & troubleshooting 8
  5. Turn off the printer, then remove the microSD card from the card slot.
  6. Reinstall the panel and screws removed in step 2 above.
  7. Place the printer back on its feet, then turn it on. Touch the Level button to verify that the new Level menu is in place.

Monoprice MP Maker Pro Mk.1 Firmware Update Instructions  & troubleshooting 9

FAQ


Setting up Monoprice MP Maker Pro Mk.1 Firmware Update Instructions is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using Monoprice MP Maker Pro Mk.1 Firmware Update Instructions is simple by using this manual. Follow the instructions one by one and everything will be fine

Is Monoprice MP Maker Pro Mk.1 Firmware Update Instructions stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for Monoprice MP Maker Pro Mk.1 Firmware Update Instructions

All symbols, colors and codes for Monoprice MP Maker Pro Mk.1 Firmware Update Instructions are explained in this instruction manual. You can find everything you need and moree