motorola Verve Buds True Wireless Earbuds User Guide

motorola Verve Buds True Wireless Earbuds User Guide  & troubleshooting 0

MODEL: VERVEBUDS 500                      Product ID: SH022
Frequency Band: 2.402 – 2.480 GHz            Bluetooth ID: D036846
Maximum RF power: 6 dBm                        FCC ID: VLJ-SH022
Working temperature: -10°C – 45°C              IC: 4522A-SH022

motorola Verve Buds True Wireless Earbuds User Guide  & troubleshooting 1

Quick Start Guide

(1) Pairing:

motorola Verve Buds True Wireless Earbuds User Guide  & troubleshooting 2

 

1. *Ensure both buds are inside the charging case with the lid closed. Take both buds out from the case.

 

motorola Verve Buds True Wireless Earbuds User Guide  & troubleshooting 3

 

2. Select “Vervebuds 500” from the smartphone Bluetooth menu

 

 

Value-added Feature
To use the buds independently (mono mode) please follow this pairing sequence.

motorola Verve Buds True Wireless Earbuds User Guide  & troubleshooting 4

3. Switch off the right bud by either holding MFB for 2 sec or by putting the right bud into the case with lid closed.

 

motorola Verve Buds True Wireless Earbuds User Guide  & troubleshooting 5

 

4. Put the left bud into pairing mode by holding it for 5 sec

 

motorola Verve Buds True Wireless Earbuds User Guide  & troubleshooting 6

 

5. Select “Vervebuds 500(L)”

 

 

*Tips: When the Vervebuds are sitting on the case, it will automatically be switched on when charging case lid is open. It will automatically be switch OFF when the lid is closed.
*Tips: Both right and left buds can be used as a mono!

(2) Fitting:

motorola Verve Buds True Wireless Earbuds User Guide  & troubleshooting 7

1. Insert the Vervebuds into your ear and rotate to fit comfortably

 

motorola Verve Buds True Wireless Earbuds User Guide  & troubleshooting 8

 

2. To optimize the best fit and audio experience, it is recommended to try different earbud sizes.

 

(3) Basic Operation:

motorola Verve Buds True Wireless Earbuds User Guide  & troubleshooting 9        motorola Verve Buds True Wireless Earbuds User Guide  & troubleshooting 10

Additional Operation
Factory reset Switch off both buds, then hold both MFB for 10 sec until it shows PURPLE LED
Reject a call Long Press MFB
Mute during call Double Press MFB
Receive incoming call and end ongoing call Double Press MFB
Receive incoming and on hold ongoing call Single Press MFB
Voice command (Siri/Google/Alexa) Double Press MFB
(only available   in standby mode)
LED Indicator
Pairing Red-blue flash
Standby Blue flash
Charging Red steady
Fully charged Off
Battery low Red flash
(4) Charging:

motorola Verve Buds True Wireless Earbuds User Guide  & troubleshooting 11

motorola Verve Buds True Wireless Earbuds User Guide  & troubleshooting 12

Fully charge before use
The device can be powered through a micro USB from any CE compliant power source that implement the European interface as requested by EN 301 489-52.

FAQ


Setting up motorola Verve Buds True Wireless Earbuds User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using motorola Verve Buds True Wireless Earbuds User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is motorola Verve Buds True Wireless Earbuds User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for motorola Verve Buds True Wireless Earbuds User Guide

All symbols, colors and codes for motorola Verve Buds True Wireless Earbuds User Guide are explained in this instruction manual. You can find everything you need and moree