MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual

MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual & troubleshooting

MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 1User Manual
Carpet Shark™
MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 2Model: CRB3010, CRB3017
REV. 1/17/22

Introduction

Dear Customer:
Congratulations on the purchase of your new Carpet Shark™ Counter Rotating Brush. As technology continues to develop you can work confidently knowing that both Mytee and its employees are equally dedicated to developing with the industry and its advances.
Like any other piece of machinery or technology, the Carpet Shark™ also requires proper maintenance and care to keep the product working over extended use. Neglecting your machine, abusing it, or not operating it properly can void its warranty and prevent the machine from performing to the quality and standard you’d expect out of the Mytee line.
If you have any warranty concerns or questions, please review this manual thoroughly or do not hesitate to contact your distributor. If there are questions regarding maintenance, replacement, or ordering parts please contact an authorized Mytee Service Center. To see an updated list please visit our website at http://www.mytee.com/support/service-centers.
Before using your Mytee product, please read this manual thoroughly.
Sincerely,
Mytee Customer Care Dept.

Important Safety Information

Please read and understand this manual completely before operating this machine.
Grounding Instructions
This machine must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electrical shock. This machine is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed in accordance with all local codes and ordinances. Do not remove the ground pin; if missing, replace the plug before use.
MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 3
Improper installation of the equipment-grounding conductor can result in a risk of electric shock. Be sure to check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded.
If the plug will not fit in the outlet do not modify the plug or the machine’s cord, instead have a proper outlet installed by a qualified technician.
This machine is for use on a nominal 120-volt circuit and with a grounding plug similar to the one in Figure 1 below a proper outlet is not available, follow the illustrations of Figures 2 & 3 to install a temporary-grounding plug. This temporary workaround should be used only until a proper outlet (Figure 1) can be installed by a qualified electrician.
When and if this type of adapter is employed, screw the adapter’s extended tab into place with a metal screw.
However, grounding adapters are not approved for use in Canada.
Again, be sure to check the grounding pin for damages and replace it if necessary.
The Green, or Green-Yellow, wire in the cord is the grounding wire. When replacing a plug, this wire must be attached to only the grounding pin.
DO NOT use extension cords.MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 4

Please Note for American use only.
Parts and Service

Please contact Mytee service personnel or a Mytee authorized Service Center using Mytee’s original replacement parts and accessories if repairs need to be performed.
When and if calling Mytee for support, please have your Model and Serial Number available for faster assistance.
Name Plate
The Model and Serial Number are located on the lower half of the back of the machine near the power plug and will be required for ordering replacement parts. You can use the
space provided in this manual to note down both for future reference.
Unpacking the Machine
When your new machine is delivered, please carefully inspect both the shipping carton and the machine for damages. If damage is evident, save both the shipping carton and machine so that the delivering carrier can inspect it. Contact the carrier immediately to file a freight claim if there has been any damage.
Caution and Warnings
Symbols
Mytee uses the symbols below to signal potentially dangerous conditions. Always read this information carefully and take the necessary steps to protect personnel and property.
MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 5
Is used to warn of immediate hazards that will cause severe personal injury or death.
MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 6
Is used to call attention to a situation that could cause severe personal injury.
MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 7
Is used to call attention to a situation that could cause minor personal injury or damage to the machine or other property. When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this machine.
This product is intended for commercial use only.
To reduce the risk of fire, electrical shock, or injury:

  1. Read all instructions before using the equipment.
  2. Use only as described in this manual. Use only manufacturer’s recommended attachments.
  3. Always unplug the power cord from the electrical outlet before attempting any adjustments or repairs.
  4. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
  5. Do not pull or carry by a cord. Do not close a door on the cord or pull the cord around sharp edges or corners.
  6. Do not run appliance over cord. Keep cord away from heated surfaces.
  7. Do not use a damaged cord or plug. If the cord is damaged, repair it immediately.
  8. Do not use outdoors or on wet surfaces and/or standing water.
  9. Always unplug or disconnect the appliance from the power supply when not in use.
  10. Do not allow it to be used as a toy. Close attention is necessary when used by or near children.
  11. Do not use in areas where flammable or combustible material may be present.
  12. Do not leave the unit exposed to harsh weather elements. Temperatures below freezing may damage components and void warranty.
  13. Use only the appropriate handles to move and lift the unit. Do not use any other parts of this machine for this purpose.
  14. Keep hair, loose clothing, fingers, and all parts of the body away from all openings and moving parts.
  15. Use extra care when using stairs.
  16. To reduce the risk of fire or electric shock, do not use this machine with a solid-state speed control device.
  17. The voltage and frequency indicated on the nameplate must correspond to the wall receptacle supply voltage.
  18. When cleaning and servicing the machine, local or national regulations may apply to the safe disposal of liquids that may contain: chemicals, grease, oil, acids, alkalines, or other dangerous liquids.
  19. Do not leave operating unattended.

At a Glance

1.1 – Technical Specifications

CRB3010 10” Carpet Shark™

CRB3017 17” Carpet Shark™

Drive System Dual motors, belt-driven brushes Drive System Dual motors, belt-driven brushes
Dimensions (With a handle at full height) 9″ x 11.75″ x 39.75″ Dimensions (With a handle at full height) 9″ x 17″ x 47.5″
Weight 39 lbs. Weight 48 lbs.
Amp Draw 6 amps @ 115V 60Hz Amp Draw 6 amps @ 115V 60Hz

1.2 – Included with the Carpet Shark™MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 8

1.3 – Carpet Shark™ Front ViewMYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 9

1. Push Handle
2. Renovator Attachment (included)
3. Storage Tray
4. Side Access Panel

1.4 – Carpet Shark™ Rear ViewMYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 10

1. Power Switch 2. Wheel Attachment (included)

Machine Operation

2.1 – Powering the Carpet Shark™
The Carpet Shark™ requires a 15 amp, 115V power outlet to operate.MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 11

Plug the female end of the lighted extension cord into the Carpet Shark’s™ pigtail power cord and plug the male end of the extension cord into a wall outlet. ♦
2.2 – Attaching Accessories
MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 12

The Carpet Shark™ attachments can be connected to the front and back of the machine via the pegs. On the front, slide the attachment to the left to lock it in place. On the rear, slide it to the right.MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 13

To remove the attachment, push the push button,  slide the attachment to the right, and lift it off of the machine. ♦
2.3 – Switching Out BrushesMYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 14

To remove a brush, slide out the brush axle from the side panel of the machine and take out the brush.
To install a brush, put the brush in place on the underside of the machine and slide the brush axle through until it is secured by the pushpin on the opposite side of the machine. ♦
2.4 – Operating the Carpet Shark™MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 15

To start the machine, press the power switch on the rear of the machine and pull back the handle. With the handle at a comfortable height, move the Carpet Shark™ back and forth over the surface being cleaned. ♦
2.5 – Storage
MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 16

After use, make sure any attachments are emptied and cleaned, wipe down the machine, and make sure the brushes are free of debris. Place on the storage tray and store in a cool, dry place. ♦

Machine Maintenance

In order to keep the Carpet Shark™ running smoothly and reduce the risk of damage to the machine and subsequent downtime, Mytee recommends following the maintenance
schedule below:

Maintenance Item

Daily Weekly

Monthly

Inspect brushes for debris and wear.

X

Check the power cable.

X

Clean machine with all-purpose cleaner and cloth.

X

Lubricate wheels with water-resistant oil.

X

Inspect the machine for loose hardware.

X

Check drive belts and tighten the tensioner if necessary.

X

3.1 – Adjusting the Belt Tensioner
Required Tools:

  • 1/8” Allen Wrench
  • 7/16” Wrench

MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 17

  1. With a 1/8” Allen Wrench, remove the black side access panel on the side with the power switch.
  2. Loosen the bolt on the tensioner with a 7/16” wrench.
  3. Adjust the tensioner to apply more pressure on the belts.
    Do not overtighten. There should be just a little bit of slack.
  4. Tighten the tensioner bolt and run the machine to make sure the belts don’t slip.
  5. Replace the black side access panel. ♦

3.2 – Replacing the Drive Belts
Required Tools:

  • 1/8” Allen Wrench
  • 7/16” Wrench

MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 18

  1. With a 1/8” Allen Wrench, remove the black side access panel on the side with the power switch.
  2. Loosen the bolt on the tensioner with a 7/16” wrench.
  3. Pull the belt out from the machine while turning the pully so the belt eventually rolls off the gear.
  4. Replace the belt by placing it on the top gear, placing the bottom of the belt on the bottom gear, and spinning the gear so the belt rolls onto it.
  5. Tighten the tensioner bolt and run the machine to make sure the belts don’t slip.
  6. Replace the black side access panel. ♦

NOTES

MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual  & troubleshooting 19Mytee, LLC
13655 Stowe Dr. Poway, CA 92064
www.mytee.com
© 2022 Mytee, LLC
Printed in the USA
13655 Stowe Dr. Poway, CA 92064
P: (858) 679-1191
F: (858) 726-6005
www.mytee.com

FAQ


Setting up MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual

All symbols, colors and codes for MYTEE CRB3010 Carpet Shark 10-Inch Counter Rotating Brush User Manual are explained in this instruction manual. You can find everything you need and moree