nedis Wireless Earphones with Voice Control User Guide

nedis Wireless Earphones with Voice Control User Guide

HPBT1050BK

ned.is/hpbt1050bk

Contents hide

1 Fully Wireless Earphones

2 Specifications

3 Main parts

4 Safety instructions

5 Pairing the earphones to a Bluetooth audio source

6 Charging the product

7 Switching on the product

8 Making phone calls

9 Controlling the music

10 Add Siri/Google Assistant function

11 Declaration of Conformity

12 Documents / Resources

12.1 References

Fully Wireless Earphones

For more information see the extended manual online: ned.is/hpbt1050bk

Intended use
The Nedis HPBT1050BK is a pair of fully wireless earphones. The product can be paired with any Bluetooth enabled audio/ video device.
Earphones can be charged up to 3 times in the charging case. Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product	Fully Wireless Earphones
Article number	HPBT1050BK
Power input	5 VDC ; 0.3 A
Bluetooth® version	5.0
Bluetooth® frequency range	2402 – 2480 MHz
Frequency response	20 Hz – 20 KHz
Max. radio transmit power	4 dBm
Impedance	2 Ω
Sensitivity	103 ± 3 dB
Driver size	10 mm
Voice control	Siri, Google Assistant
Battery type	Lithium-Polymer (earphones) Lithium-Polymer (charging case)
Charging time	Up to 2 hours
Case recharges	Up to 3 times
Battery capacity earphones	2 x 40 mAh
Battery capacity charging case	300 mAh
Play time	Up to 3 hours
Waterproof	No

Main parts

Lid
Left earphone slot
Power indicator button
Charging indicator LED
Status indicator LED / Microphone
Left earphone button
Right earphone button
Micro USB port
Right earphone slot
Micro USB cable
3 Pairs of ear tips (S/M/L)

Safety instructions

WARNING

Only use the product as described in this manual.
Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
Do not expose the product to direct sunlight, naked flames or heat.
Do not expose the product to water or moisture.
Do not drop the product and avoid bumping.
Do not open the product.
Keep the product out of reach from children.
This product is not a toy. Never allow children or pets to play with this product.
Using earphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas.
Listening on high volume for a long time will damage your hearing.
Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants and hearing aids. Consult the manufacturer of your medical equipment for more information.
Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.
Do not short circuit.
Do not repair the product. If damaged, it must be properly disposed of.
Only use the product as described in this manual.

Pairing the earphones to a Bluetooth audio source

Take the earphones out of the charging case. The earphones switch on automatically.
Press and hold both earphone buttons A6 A7 for 5 seconds to switch the earphones on manually.
The status indicator LED A5 on the left earphone starts to blink blue/red while the right earphone blinks blue to indicate the earphones are pairing.
Enable bluetooth on the device you want to pair the earphones with.
Select “HPBT1050BK” from the list of available Bluetooth devices on your device.

Charging the product

Plug the micro USB cable A10 into the micro USB port A8.
Plug the other end of A10 into a computer or power adapter.
Plug the power adapter into a power outlet.
The charging indicator LEDs A4 indicate the charging progress of the battery.
Place the earphones into the respective slots A2 A9 and close the lid A1 to charge the earphones.
A5 on the earphones lights up red.
A5 switches off when the earphones are fully charged.
The earphones and the charging case can charge simultaneously

Switching on the product

Press and hold A6 and A7 for 3 seconds to switch the product on or off.

Making phone calls

With the earphones connected to a mobile phone via Bluetooth, phone calls will automatically be redirected to the earphones.

To answer an incoming call, press A6 or A7.
To reject an incoming call, press and hold A6 or A7 for 1 second.
To end a call, press A6 or A7.

Controlling the music

Press A6 or A7 to play or pause the music.
Triple press A7 to increase the volume.
Triple press A6 to decrease the volume.
Double press A7 to skip to the next track.
Double press A6 to skip to the previous track.

Add Siri/Google Assistant function

Press and hold A6 or A7 for 2 seconds to activate Siri/ Google Assistant.

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product HPBT1050BK from our brand Nedis® , produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/hpbt1050bk#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com
E-mail: [email protected]
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands