NETGEAR MS80 Nighthawk Tri-Band Mesh WiFi 6 Satellite User Guide

29 May 2022 adminNETGEAR

Launch the Nighthawk app
Launch the Nighthawk app.
Add the satellite
Tap > ADD SATELLITE.
Install the satellite
Follow the prompts to install.

Contents hide

1 Contents

2 Overview

3 LED

4 Documents / Resources

4.1 References

Overview

LED

A Sync button
B Reset button
C Ethernet ports
D Power connector

Support and Community
Visit netgear.com/support to get your questions answered and access the latest downloads.
You can also check out our NETGEAR Community for
helpful advice at community.netgear.com.

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA

NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland

July 2020
© NETGEAR, Inc., NETGEAR and the NETGEAR
Logo is trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.

References

FAQ

Setting up NETGEAR MS80 Nighthawk Tri-Band Mesh WiFi 6 Satellite User Guide is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using NETGEAR MS80 Nighthawk Tri-Band Mesh WiFi 6 Satellite User Guide is simple by using this manual. Follow the instructions one by one and everything will be fine

Is NETGEAR MS80 Nighthawk Tri-Band Mesh WiFi 6 Satellite User Guide stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for NETGEAR MS80 Nighthawk Tri-Band Mesh WiFi 6 Satellite User Guide

All symbols, colors and codes for NETGEAR MS80 Nighthawk Tri-Band Mesh WiFi 6 Satellite User Guide are explained in this instruction manual. You can find everything you need and moree