NEWSTAR AV and IT Mounts User Manual

NEWSTAR AV and IT Mounts User Manual & troubleshooting

NEWSTAR AV and IT Mounts User Manual  & troubleshooting 1

NEWSTAR AV and IT Mounts

NEWSTAR AV and IT Mounts User Manual  & troubleshooting 2

Caution

  1. To ensure safety, please read this manual carefully before installation and foIlow the instructions. Store this manual in a secure place for future reference.
  2. The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
  3. The product is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.
  4. It is recommended that the product be installed by qualified personnel only.
  5. At least two persons are needed to install or remove the product to avoid hazard of falling objects.
  6. Please carefully inspect the area where the product is to be installed:
    • Avoid places that are subject to high temperatures, humidity or contact with water.
    • Do not install the product near air conditioning vents or areas with excess dust and fumes.
    • Do not install in places subject to any shock or vibration.
    • Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
  7. Maintain sufficient space around the display to ensure adequate ventilation.
  8. To ensure safe installation, first check the structure of the surface, wall, ceiling or floor and select a secure mounting location.
  9. The surface, wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and product combined. The mounting location must be able to withstand earthquakes or other strong shock.
  10. Do not modify any accessories or use broken parts. Contact your dealer with any questions.
  11. Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
  12. Since the manufacturer cannot verify/ oversee the quality of the surface/ wall, ceiling or floor nor the quality of installation of the product, the warranty of the product shall only cover the product itself, not the functioning of the product. The warranty period of the product is 5 years.
  13. Please consult the English language manual for any dispute on conditions.

PartsNEWSTAR AV and IT Mounts User Manual  & troubleshooting 3NEWSTAR AV and IT Mounts User Manual  & troubleshooting 4NEWSTAR AV and IT Mounts User Manual  & troubleshooting 5

Step 1
Run the cables through the PLXPROTECT safety screen.NEWSTAR AV and IT Mounts User Manual  & troubleshooting 6

Step 2
Place the monitors on a flat surface and place the PLXPROTECT safety screen in the correct position.NEWSTAR AV and IT Mounts User Manual  & troubleshooting 7

Step 3
Fix the combination on the desk mount.NEWSTAR AV and IT Mounts User Manual  & troubleshooting 8

Step 4
Connect the cables.NEWSTAR AV and IT Mounts User Manual  & troubleshooting 9

NEWSTAR AV and IT Mounts User Manual  & troubleshooting 10

FAQ


Setting up NEWSTAR AV and IT Mounts User Manual is easy with these step-by-step instructions. Follow the steps are you are set-up in no time.

Using NEWSTAR AV and IT Mounts User Manual is simple by using this manual. Follow the instructions one by one and everything will be fine

Is NEWSTAR AV and IT Mounts User Manual stuck or not working properly? By resetting it you can set it back to the standard settings and everything should be back to normal. This works in many cases when problems arise.

This page contains the complete user instructions & manual for NEWSTAR AV and IT Mounts User Manual

All symbols, colors and codes for NEWSTAR AV and IT Mounts User Manual are explained in this instruction manual. You can find everything you need and moree